11. Attaching The Strips; 12. Adjusting The Door Spring - Thermador T18ID800LP Installation Instructions Manual

11. Attaching the strips

1. Attach the cover strip (a) on the door.
2. Attach the light switch cover.
The cover can be screwed to the door.
Side-by-Side installation only:
Insert the cover strip into the space between the
appliances.
The cover rail is included in the installation accessories
for side-by-side installation.

12. Adjusting the door spring

Rotate the adjusting screw with a cross-head
screwdriver.
I = maximum spring tension
0 = no spring tension
These are special installation steps.
Instructions are provided after section C.
Ice-water dispenser, see "Aligning the
ice-water dispenser".
Cover strips for a wine unit, see
"Attaching the cover strips"
Door limitation pin, see "Adjusting the
door opening angle".
Installation of the appliance is now complete.
23