Subscribe to Our Youtube Channel
Related Manuals for Teleste TEN-FWB2
Summary of Contents for Teleste TEN-FWB2
- Page 1 FTTx SOLUTIONS TEN-FWB2 - DISTRIBUTION ENCLOSURE Installation Guide Rev. 1.10/10.2024...
-
Page 2: Table Of Contents
FTTx Solutions Contents Getting Started............................1 Introduction ............................1 Package Contents ..........................1 About the TEN-FWB2 Distribution Enclosure ..................2 Product Specification - General ......................2 Mechanical Layout ..........................2 Installation Instructions .........................3 General Preparations and Precautions ....................3 Preparation of the Incoming Optical Cable .................. -
Page 3: Getting Started
Package Contents Kindly unpack the TEN-FWB2 and confirm that all items are present, as illustrated in Figure 1. Should any items be missing, please promptly contact your local seller for assistance. -
Page 4: About The Ten-Fwb2 Distribution Enclosure
FTTx Solutions About the TEN-FWB2 Distribution Enclosure The TEN-FWB2 is engineered for extreme conditions, this rugged enclosure operates flawlessly in temperatures ranging from -40°C to +80°C, ensur- ing reliable performance in the harshest environments. Supporting input cables up to 10.0 mm and output cables up to 3.0 mm, it offers versatile... -
Page 5: Installation Instructions
TEN-FWB2 Installation Guide Rev. 1.10/10.2024 e n l i g h t e n FTTx Solutions Installation Thank you for choosing this Teleste product. Please take a moment and carefully read these instructions through before installing the product. Instructions General Preparations and Precautions 1. - Page 6 TEN-FWB2 Installation Guide Rev. 1.10/10.2024 e n l i g h t e n FTTx Solutions All necessary safety instructions must be followed during the installation and maintenance operations. The safety requirements for class 1M lasers are detailed in EN60825-1.
- Page 7 TEN-FWB2 Installation Guide Rev. 1.10/10.2024 e n l i g h t e n FTTx Solutions 3. Loosen the screw for the secure clamp and temporarily remove the cable clamp used to secure the incoming cable. Warning! Never look directly into the end of a fibre or a fibre connec- tor that may be carrying laser light.
- Page 8 TEN-FWB2 Installation Guide Rev. 1.10/10.2024 e n l i g h t e n FTTx Solutions 5. Next, route the incoming optical fibre tube onto the splice tray. Carefully thread it through the designated slot, ensuring it is properly positioned. Avoid sharp bends or excessive tension that could damage the fibre.
- Page 9 TEN-FWB2 Installation Guide Rev. 1.10/10.2024 e n l i g h t e n FTTx Solutions 7. Thread the drop cables through the inlet ports, install the fast connectors, and connect them to the adapters. Picture 8 8. When the diameter of a fibre cable is smaller than that of an inlet/ outlet port, use sealing tape to increase the external diameter of the fibre cable.
-
Page 10: Mounting Guidance
TEN-FWB2 Installation Guide Rev. 1.10/10.2024 e n l i g h t e n FTTx Solutions Mounting Guidance To successfully complete the mounting of the product, follow the guidance steps outlined below. Ensure you have all necessary tools and materials on hand before beginning the process. -
Page 11: Legal Declarations
This document is protected by copyright laws. Unauthorized distribution or reproduction of this document is strictly prohibited. Teleste reserves the right to make changes to any of the products described in this document without notice and all specifications are subject to change without notice. - Page 12 Teleste reserves the right to make changes to any features and specifications of the products without prior notice. Although the information in this document has been reproduced in good faith, the contents of this document are provided “as is”. Teleste makes no warranties of any kind in relation to the accuracy, reliability or contents...
Need help?
Do you have a question about the TEN-FWB2 and is the answer not in the manual?
Questions and answers