FTTx Solutions Getting Started Introduction The TEN-FWB16 is a compact and versatile enclosure designed for fibre splicing, splitting, and accommodating adapters for customer connec- tions. It features a unique gland for convenient top entry of drop cables and ducts, supporting pass-through cabling.
FTTx Solutions About the TEN-FWB16 FTTH Wall Enclosure The TEN-FWB16 FTTH Wall Enclosure is a compact and versatile floor dis- tribution solution, perfect for vertical outdoor and indoor cabling applica- tions. This IP65-rated enclosure ensures protection against dust and water ingress, making it suitable for various environments.
TEN-FWB16 Installation Guide Rev. 1.00/08.2024 e n l i g h t e n FTTx Solutions Installation Thank you for choosing this Teleste product. Please take a moment and carefully read these instructions through before installing the product. Instructions General Preparations and Precautions 1.
Page 6
TEN-FWB16 Installation Guide Rev. 1.00/08.2024 e n l i g h t e n FTTx Solutions 2. Next, manually release the latches on the box body. Once the latches are released, you can open the upper cover easily. All necessary safety instructions...
Page 7
TEN-FWB16 Installation Guide Rev. 1.00/08.2024 e n l i g h t e n FTTx Solutions 4. Thread the incoming cable through the rubber grommet. Secure the cable with a cable tie or a metal worm drive ring, and fix the cable’s strength member using the nearby screw.
Page 8
TEN-FWB16 Installation Guide Rev. 1.00/08.2024 e n l i g h t e n FTTx Solutions 5. An alternative splice scheme is illustrated in Pictures 6 and 7, showcasing an 8 Core split-wire splice. Please refer to the images for a comprehensive understanding of the setup and its configuration.
Page 9
TEN-FWB16 Installation Guide Rev. 1.00/08.2024 e n l i g h t e n FTTx Solutions 6. Another splice scheme is illustrated in Pictures 8 and 9, featuring a 1/8 PLC splice. For a detailed understanding of the setup and its configuration, please refer to the images.
Page 10
TEN-FWB16 Installation Guide Rev. 1.00/08.2024 e n l i g h t e n FTTx Solutions 7. Close the lid and use a screwdriver to tighten the anti-theft screw by turning it clockwise. Ensure the box is securely fastened to prevent unauthorized access and maintain the integrity of the optical connections.
TEN-FWB16 Installation Guide Rev. 1.00/08.2024 e n l i g h t e n FTTx Solutions Mounting Guidance To successfully complete a wall mount installation, follow the guidance steps outlined below. Ensure you have all necessary tools and materials on hand before beginning the process.
This document is protected by copyright laws. Unauthorized distribution or reproduction of this document is strictly prohibited. Teleste reserves the right to make changes to any of the products described in this document without notice and all specifications are subject to change without notice.
Page 13
Teleste reserves the right to make changes to any features and specifications of the products without prior notice. Although the information in this document has been reproduced in good faith, the contents of this document are provided “as is”. Teleste makes no warranties of any kind in relation to the accuracy, reliability or contents...
Need help?
Do you have a question about the TEN-FWB16 and is the answer not in the manual?
Questions and answers