Dri-Eaz 119218 Owner's Manual

The Rescue Mat System uses the power of Dri-Eaz DriForce
from inside wood floor assemblies. Two different mat sizes make it easy to custom fit the Rescue Mat System
to any floor layout.
R E A D A N D U N D E R S T A N D B E F O R E O P E R A T I N G
WARNING
ADVERTENCI
CAUTION: Do not alter or modify your Dri-Eaz product
in any way. Use only replacement parts authorized by
A
Legend Brands, Inc. Modifications or use of unapproved
parts could create a hazard and will void your warranty.
Contact your authorized Legend Brands distributor for
assistance.
WARNING
Hoses and mat edges are a trip hazard. Place
the Rescue Mats out of traffic areas or re-route foot
traffic.
WARNING: This product and other substances
that may become airborne from its use contain
chemicals, including lead and phthalates, known to the
State of California to cause cancer, birth defects, or
other reproductive harm. For more information, go to
P65Warnings.ca.gov
Fig. A: Typical Rescue Mat System Setup
with DriForce blower
117652E
Owner's Manual
Rescue Mat System
LEGEND BRANDS, INC.
15180 Josh Wilson Road, Burlington, WA 98233
Phone: 800-932-3030 Legendbrands.com
Patents: LBpatents.com
®
high pressure blower to pull evaporated moisture
WARRANTY REGISTRATION
Please visit
https://www.legendbrands.com/resources/warranty-
registration/ to register your purchase. If you determine
service is required, have your equipment model, serial
number and original proof of purchase available and call
your distributor for assistance with obtaining a return
material authorization (RMA).
USE AND OPERATION
IMPORTANT: The Rescue Mat System should only
be used on wood plank flooring. Do not use on non-
porous surfaces.
Before Using Rescue Mats: Extract Water
IMPORTANT: Do NOT use the DriForce to extract
standing water. Liquid water drawn into the DriForce
may damage motors and void those units'
warranties.
1) Remove standing water from the surface of flooring
assembly using portable or truckmount extractors.
2) Using a moisture meter, determine how much of the
flooring is affected by the water intrusion; temporarily
mark the outline of the area with a releasable tape.
3) Extract subsurface water in the marked area,
connecting Rescue Mats to the extractor hose of a
truckmount or portable extractor. Operate the extractor
until no more liquid water is drawn from the floor. Move
the mat/mats to a new section and repeat process on all
affected flooring.
Rescue Mat System First-Use Setup
Connect the vacuum hoses to the Rescue Mats via the
T-connectors paired up with the loose black hose cuffs.
The larger ends of the hose cuffs slide onto the stems of
the T-connectors. The smaller ends are for connecting to
the flange of the mats.
To achieve a secure fit, use an electric heat gun or hair
dryer to heat up the small (interior threaded) end of a
hose cuff. Rotate and heat thoroughly and evenly, until
1 Legend Brands, Inc.