Installation - ViewSonic N3250W - NextVision - 32" LCD TV User Manual

Installation

1. Insert Remote Control Batteries
1 Remove the battery cover by pulling then lifting the knob on the cover.
2 Insert the batteries, corresponding to the (+) and (-) markings on the battery compartment.
3 Reattach the battery cover.
CAUTION
Only use the specified AAA batteries.
•
Do not mix new and old batteries. This may result in cracking or leakage,
•
which may pose a risk of fire or lead to personal injury.
Insert batteries according to (+) and (-) markings. Inserting the batteries
•
incorrectly may result in cracking or leakage, which may pose a risk of fire or
lead to personal injury.
Dispose of the battery in accordance with local laws and regulations.
•
Keep the battery away from children and pets.
•
When the remote control will not to be used for an extended period, remove
•
the batteries.
2. Connecting RF antenna or Cable TV Wire
Make sure the power is OFF before installing your LCD TV.
Connect the LCD TV to TV antenna or set-top-box with 75-ohm coaxial cable.
Preset the TV channels into memory with Auto Scan function when using an
antenna or cable TV system without a cable connecter box (See page 16).
ViewSonic
RF Cable or Adapter
(not supplied)
9
N3250w