RUSTA LYON 601500090101 Manual page 2

Thank you for choosing to
purchase a product from Rusta!
Café table, Lyon
Read the user manual carefully to make sure that the product is assembled,
used and maintained correctly, as described in the instructions in this user
manual. Keep the user manual for future reference.
CARE INSTRUCTIONS
Aintwood is a plastic material that resembles wood and requires less main-
tenance in comparison with wooden furniture. Aintwood is dyed polystyrene that
can withstand temperatures from -25 °C to +50 °C. The material is recycled as
rigid plastic and forms carbon dioxide when burnt.
GENERAL CARE
You need to clean furniture made from Aintwood regularly after use. Visible dirt
and spillages should be wiped away immediately. Never place hot objects
(e.g. saucepans, cigarettes, barbecue equipment) directly onto the table, as it
may melt and leave ugly marks. Remember that if you leave objects like drinking
glasses/vases in strong sunlight, they can focus the sun's rays and cause burn
marks in the table top. Aintwood furniture should not be left in glass conserva-
tories that are unventilated, as extreme temperatures of more than +50 °C can
be reached. This will soften the material and disfigure it.
The aluminium frame does not require much maintenance. It should be cleaned
when needed and perhaps painted if it starts to peel.
CLEANING
Aintwood table with matt finish
Aintwood with a matt finish absorbs stains more readily. Spills and raindrops
are more noticeable than with a gloss finish. Matt Aintwood therefore requires
more cleaning than gloss Aintwood. We recommend using glass placemats and
a table cover to reduce the need for cleaning. For light dirt stains, soapy water
and a cloth or sponge will be sufficient. For tougher stains, e.g. red wine, coffee
and grease, a more concentrated detergent solution will be required to remove
the stains. Soak with the detergent solution for around 5–10 min. Then rub the
area with a soft sponge in the direction of the grain. Do not wash in direct sun-
light to avoid the surface drying too quickly. Rinse thoroughly with water.
If necessary, repeat the process. If you want to have a surface that is more res-
2
Read through the entire manual
before installation and use!