Contax TVS DIGITAL Instruction Manual page 8

# Do not attempt to disassemble or modify the battery pack, since it generate heat, emit
smake or flame, or the internal battery liquid may enter your eyes, causing blindness or
other personal injury. Should battery liquid enter the eyes, wash them with clear running
water and seek medical attention immediately
@ Use only the designated battery charger for charging the battery pack. Use of other charger may
cause the battery pack to generate heat or smoke, catch fire or explode
® Do not use a leaking battery pack. Battery liquid may contact your skin, causing personal
injury. In the event battery liquia does contact skin, wash immediately with clean water,
7 © Do not use broken ar ruptured battery pack, since it may generate heat, emit smoke or
flame, or cause electrical shock.
e Do not place the battery pack in water of any kind, or allow it to become wet, since it may
generate heal, emit smoke or flame, or cause electrical shock
® Do not use or attempt to recharge a wet battery pack, since it may generate heat, emit
smoke or flame, or cause electrical shock
® Do not store the battery pack in locations accessible to small children, since injury could result.
è Do not throw the battery pack or subject them to strong shocks, since it may be damaged
and leak battery fluid,
CAUTION] e Whenever possible, use the battery pack at room temperature (20°C = 5°C). The battery
capacity and usable time between charging may be reduced in situations of extreme heat or
cold, such as during mid-summer or deep winter weather, or when the battery pack is left in
a hat location (e.g., Inside a closed car exposed to sun). Such conditions may also shorten
the usable service life of the battery pack.
e When nat using the battery pack, store it in a cool, dry location
AY Lithium-lon Battery Pack.
Please recycle alter use.
<Battery Charger and AC Adapter Handling Precautions>
@ Make sure that charger and AC adapter plugs are connected securely before use
Loose plugs and poor contacts can cause generation of heat, fire, and electrical shock.
e Do not attempt to modify the AC adapter cords, or subject them ta unreasonable force.
Damaged cords can cause fire and electrical shack, Discard cords whose wire cores are
exposed and consult your dealer or Contax Service Center.
@ Do not attempt to remove covers. disassemble, repair or modify your charger or AC adapter.
since dangerous electrical shock could result.
a Charger or AC adapter plugs that have become laden with cin or household dust should not
be used, especially not in the vicinity of metal objects, since electricity might be transmitted
through the metal, causing fire or electrical shock, If the plug is heavily soiled, disconnect it
and clean it before reuse
e Inthe event that a charger or AC adapter plug emits smoke, unusual smell or sound, ar il it
is damages by impact or by being dropped. cease use immediately. Continued use of a
Gamaged plug could result in fire danger, If a plug is damaged, consult your dealer or
Contax Service Center
| @ Do not connect the AC adapter to any sources of power other than a household AC outlet
[AC 1009-2404, 50/6042). Using the adapter with other voltages or ratings may cause a fire
| hazard or electrical shack.
ARNING
e Usa only the designated AC adapter and charger, Using other adapters or chargers may
result in accidents and fire danger,
e Never attempt to splice the AC adapter cord, or subject it to severe twisting, bending, or
Stretching,
e Do not handle the charger or AC adapter with wet hands, since electrical shack could result.
e Always grasp the plug (not the card) when removing the AC adapter plugs from camera and
power outlet, Pulling the cord could cause breakage or wire damage, resulting in danger af
fire or alectncal shock
e if you notice any damage to the charger or AC adapter, including broken wires and faulty
plug contacts, discontinue use and consult your dealer ar Cantax Service Center
CAUTION
e Prolonged use may cause the AC adapter ta feel warm; this is only normal and not a malfunction.
e When not using the AC adapter for an extended period of time, first remove the plug from the camera, then
disconnect the adapter from its AC outlet.