Super B NOMIA Quick Start Manual

Download User Manual at:
https://tbs-electronics.com/product/remote-battery-switch/
QUICK START GUIDE
TBS Remote battery switch
12V: DCM RBS 12V-500A
24V: DCM RBS 24V-500A
48V: DCM RBS 48V-350A
TBS RBS CONNECTIONS
WARNING!
• Always consult the latest manual on the TBS website to
be informed about pre-cautions and specifications.
• The TBS relay is delivered default bi-stable mode. Please
use the manual to put the relay in mono-stable mode.
• A complete power loss of the system (e.g. fuse blow or
wire cut) might cause the TBS relay to stay in the last
position since in basics it is a bi-stable relay. This means
that it might stay on. When replacing the fuse, it might
lead to the system turning on again leading to an unsafe
situation. Verify if this behavior fits the safety
requirements in your system. In case of doubt contact
v +
Super B.
switch on/o
Not used
Optional feedback signal
www.s up er- b .c om
CONNECTING A TBS
RBS TO A NOMIA
NOMIA
Version 1.2