eFOLDi Navigator Quick Start Manual

Before using, position the eFOLDi Navigator in an open
HOW TO
UNFOLD
Your eFOLDi Navigator has an accessory bag.
Stand the chair
up and undo the
seatbelt clip
securing the
chair in its folded
position.
Install the arms by pushing them
down until you hear a click and
the red button locks.
Attach attendant control to
the top of the chair frame.
Place the non-slip cushion onto
the seat (bobbly side down),
securing with the Velcro tabs.
Navigator Quick Start Guide
area away from pets and small children. Unfolding is
easy, and with practice, you can set it up in seconds.
We recommend practicing before your first outing.
Inside you will find the anti-tip wheels,
a battery charger, and optional handles.
Insert the joystick rod under
the armrest and tighten the
Connect the power cable to
the battery by sliding the port
cover & inserting power cable.
The red brake levers are set in the
forward position which engages the
motor. For free-wheel mode, pull
both levers into the backward position.
Unfold the chair by
pushing the seat down.
knob very securely.
Lay the outer
carton flat and
remove all
packaging from
the Navigator
before assembly.
Insert the anti-tip wheels into the
back of the chair frame with the
sprung buttons facing inward.
Install attendant handles by
screwing them into the top
of the chair frame.
Push the foot
rest down.
Turn on the power button,
refer to the user manual
for more information.