eFOLDi Power Chair Quick Manual

Anti-tip wheels and battery
1 charger are supplied with your
Power Chair.
Keep controller cable away
4 from pinch points like the
armrest supports.
...insert the controller rod into the
armrest fitting under the
7
armrest...
10 Pull foot rest down.
Please note this leaflet is intended to be a quick guide only. For full instructions, please refer to our user product manual.
Any questions, please call us on 0800 915 0800 or email
QUICK GUIDE
Unfolding the eFOLDi Power Chair
Before starting place the Power Chair in an open space
away from pets and small children.
Unfolding is straightforward and with a little practice
you will be able to set it up in seconds.
We advise you to practise with the scooter before
venturing out for the first time.
Install the anti-tip wheels if
2 desired. These simply press and
lock into place.
Install armrest supports into the
5 slots and press them down until
they lock.
...adjust the position of the
controller and tighten with the
8
knurled knob.
Install seat cushions as shown.
11 These are held in place by
Velcro tabs...
services@efoldi.com
Unfold the Power Chair by simply
3
pushing the seat bottom down.
6 Take the controller unit and...
Remove attendant control from
9 back pocket and attach to the bar
at rear.
...make sure these are folded over
12 the back rest and under the seat.
Power Chair is now ready.