Pap Source; Pap Swap; Sleep Timer; Child Lock - Hitachi L32HP01 User Manual

PAP Source

Select PAP Source item by using
/ button to set PAP source.
Note: When main picture source is TV, AV-1, AV-2
or AV-3, PIP window can only be set to
HDMI-1, HDMI-2, AV-5, PC source or vice versa.

PAP SWAP

Select PAP SWAP item by using
/ button. This function enables to swap between
the main and the PAP picture.
Note: See Appendix B for all PIP/PAT modes.

Sleep Timer

By pressing /
button to set the Sleep Timer. .
The timer can be programmed between Off and 120
minutes in steps of 10 minutes.

Child Lock

By pressing / select Child Lock.
Press / button to set the Child Lock on or off.
When on is selected, the TV can only be controlled by
the remote control handset. In this case the control
panel buttons will not work (except for the STANDBY
button). Hence, if one of these buttons is pressed,
"Child Lock On" will be displayed on the screen when
the menu screen is not visible.

Language

By pressing / button, select Language.Use
/ button to select the language. Available language
options are; English, French, German, Italian, Span-
ish, Portuguese, Dutch, Greek, Swedish, Norwegian,
Danish, Finnish, Turkish, Croatian, Slovenian, Polish,
Czech, Hungarian, Russian, Bulgarian, Greek, Slo-
vak.

AV-2 Out

By pressing / select AV-2 Out.Use
to set AV-2 Out to TV/DTT, AV-1, AV-3, FAV, YPbPr
Audio or PC Audio.
Note: When TV Source is set to HDMI, HDMI Audio
setting will be available among AV-2 Out options.

PC Audio In

By pressing / select Pc Audio In.By pressing
/ button, you can change the PC Audio In to TV/
DTT, AV-1, AV-2, AV-3, FAV, YPbPr Audio, PC Au-
dio.
/ button. Use
/ button. Use
select "Sleep Timer".Press

Blue Background

You can set the TV to automatically change to a blue
screen if the signal is weak or absent, or when there
is no input from an external device.
The Blue Background feature can be turned on or off
by pressing

Menu Background

By pressing
Transparency level is adjusted by pressing
button.

Menu Timeout

By pressing
Press
/
30 sec or 60 sec.

Teletext Language

By pressing
Press
West, East, Turk/Gre,Cyrillic, or Arabic.

Default Zoom

Default zoom is a feature that provides the zoom mode
of the TV set to be switched to the selected default
zoom mode (Panoramic, 4:3 ,14:9 zoom) in case no
WSS or 4:3 signal by end-user.
By pressing
can set Default Zoom to Panoramic, 4:3 or 14:9 Zoom
by pressing

Install Menu

INSTALL
/ button,
Channel
- 24 -
/ button.
/ button, select Menu Background.
/ button, select Menu Timeout.
/ button to change menu timeout to 15 sec,
/ button, select Teletext Language.
/ button to change Teletext Language to
/ button, select Default Zoom. You
/ button.
Program Table
Program
Band
Colour System
/
ou