Table of Contents
Advertisement
connections set up, the recipient does not know that
you are sending an invitation. However, you receive an
error message that the recipient cannot accept the
invitation.
Settings
Person-to-person connection settings
A person-to-person connection is also known as a Session
Initiation Protocol (SIP) connection. The SIP profile settings
must be configured in your device before you can use
Video
sharing. Setting up a SIP profile allows you to
establish a live person-to-person connection to another
compatible device. The SIP profile must also be established
to receive a sharing session.
Ask your network operator or service provider for the SIP
profile settings, and save them in your device.
Your network operator or service provider may send you
the settings over the air or give you a list of the needed
parameters.
If you know a recipient's SIP address, you can enter it on
your contact card for that person. Open
your device main menu, and open the contact card
(or start a new card for that person). Select
detail
>
Web
address. Enter the SIP address in the format
sip:username@domainname (you can use an IP address
instead of a domain name).
16
Share live video and video clips
To receive a sharing session, the recipient must install
Video sharing
mobile device. You and the recipient must both be
registered to the service before you can start sharing.
1
Select
If you selected Clip, a list of video clips opens. Select a
video clip you want to share and
invitation.
2
Select the SIP address of the recipient to which you
want to send the invitation from the contacts list.
If the SIP address of the recipient is not available,
enter a SIP address.
3
Sharing begins automatically when the recipient
accepts the invitation.
4
Select
Select
clip, you can rewind and fast forward the clip.
5
To end video sharing, select
slider. Video sharing also ends if the active voice call
ends.
Contacts
from
Options
>
Add
Copyright © 2006 Nokia. All rights reserved.
and configure the required settings on their
Options
>
Share video
>
Live
Pause
to pause the sharing session.
Continue
to resume sharing. If sharing a video
Stop
or Clip.
Options
>
Send
or close the camera
Advertisement
Table of Contents
