Nokia MU-9 User Manual page 103

User guide
Table of Contents

Advertisement

UMTS network, multiple packet data connections are
active.
UMTS network, packet data connection is on hold.
Receive access point settings
You may receive access point settings in a text message
from a service provider, or you may have preset access
point settings in your device. See
p. 50.
To create a new access point, press
Settings
>
Connection
An access point may be protected ( ) by your network
operator or service provider. Protected access points
cannot be edited or deleted.
Access points
Tip! See also
p. 48, "E-mail", p. 56, and
Follow the instructions given to you by your service
provider.
Connection
name—Give a descriptive name for the
connection.
Data
bearer—Depending on the data connection you
select, only certain setting fields are available. Fill in all
fields marked with
92
"Data and
settings",
, and select
>
Access
points.
"Receive MMS and e-mail
"Access the
Web", p. 65.
Must be defined
or with a red asterisk.
Copyright © 2006 Nokia. All rights reserved.
Other fields can be left empty, unless you have been
instructed otherwise by your service provider.
To be able to use a data connection, the network service
provider must support this feature, and if necessary,
activate it for your SIM card.
Access point name
point name is needed to establish a connection to the
packet data and UMTS networks. You obtain the access
point name from your network operator or service provider.
Tools
>
User
name—The user name may be needed to make a data
connection, and is usually provided by the service provider.
The user name is often case-sensitive.
Prompt
password—If you must enter a new password
every time you log in to a server, or if you do not want to
save your password in the device, select Yes.
settings",
Password—A password may be needed to make a data
connection, and is usually provided by the service provider.
The password is often case-sensitive.
Authentication—Select
Homepage—Depending on what you are setting up,
write the Web address or the address of the multimedia
messaging center.
(for packet data only)—The access
Normal
or Secure.

Advertisement

Table of Contents
loading

This manual is also suitable for:

N70

Table of Contents