Table of Contents
Advertisement
C a m e r a
clips saved in the .mp4 file format in a multimedia
message.
• To upload the video clip to a compatible online album,
select
Sign in for Share online
• To open the Gallery, select
• If you do not want to keep the video, select
(
).
Camera settings
There are two kinds of settings for the still image camera:
active toolbar settings and main settings. To use active
toolbar settings, see
"Active toolbar",
toolbar settings return to the default settings after you
close the camera, but the main settings remain the same
until you change them again.
Still image camera settings
To change the main settings, select
To set the image resolution (only available in the main
camera), select
Image
quality. The better the image
quality, the more memory the image consumes. To print
the image, select
Print 5M -
or
Print 2M -
Medium. To send it through e-mail, select
E-mail 0.8M -
Med.. To send the image through
multimedia messaging (MMS), select
54
Copyright © 2009 Nokia. All rights reserved.
(
).
Go to Gallery
(
).
Delete
p. 51. The active
Options
> Settings.
Large,
Print 3M -
Medium,
MMS 0.3M -
Small.
To select whether to see the captured image after it is
captured or to continue capturing images immediately,
select
Show captured
image.
To add GPS location coordinates to each image file, select
Record location
> On. Receiving a GPS signal may take
time or the signal may not be available.
To allow the zoom increments to be smooth and
continuous between digital and extended digital zoom,
select
Extended digital zoom
camera only). To allow the zoom increments to pause at
the digital and extended digital step point, select
(paused). To limit the zoom to where the selected image
quality is maintained, select Off.
To return the default values to the camera settings, select
Restore camera
settings.
Video settings
To change the main setting in video mode, select
> Settings.
To set the quality of the video clip, select
Select
Sharing
if you want to send the video clip using a
multimedia message.
To add GPS location coordinates to the video clip, select
Record location
> On. Receiving a GPS signal may take
time or the signal may not be available.
>
On (continuous)
(main
On
Options
Video
quality.
Advertisement
Table of Contents
