Write Text; Traditional And Predictive Text Input - Nokia MU-43 User Manual

W r i t e t e x t

Write text

Traditional and predictive text
input
When you write text,
predictive text input and
the predictive text input on or off, press # repeatedly, or
press *, and select Activate predictive text
text > Off.
, , or
indicates the character case or number mode. To change
the character case, or to change between letter and
number mode, press # repeatedly.
To change the writing language of your device, select
Settings > Phone sett. >
Language > Writing language. The writing language
affects the characters available when writing text and the
predictive text dictionary used. Not all characters available
under a number key are printed on the key.
Write with traditional text input
Press a number key, 2 to 9, repeatedly until the desired
character appears. Press the 1 key for the most common
punctuation marks and special characters.
38
Copyright © 2009 Nokia. All rights reserved.
on the display indicates
traditional text input. To set
or Predictive
next to the text input indicator
General > Personalisation
If the next letter you want is on the same key as the
present one, wait until the cursor appears (or scroll
forward to end the time-out period), and enter the letter.
Write with predictive text input
1 Press a number key, 2–9, only once for one letter. The
word changes after every keypress. For the most
common punctuation marks, press 1.
2 When you have finished the word and it is correct, to
confirm it, scroll forward or insert a space.
If the word is not correct, to view the matching words
the dictionary has found one by one, press * repeatedly.
If the ? character is shown after the word, the word you
intended to write is not in the dictionary. To add a word
>
to the dictionary, select Spell. Enter the word (up to 32
>
letters), and select OK. The word is added to the
dictionary. When the dictionary becomes full, a new
word replaces the oldest added word.
Common functions in traditional and predictive text
input
To insert a number, press and hold the number key.
To enter punctuation marks and special characters, press
and hold *.