Release Shutter - Nikon F55 - F55 35mm SLR Camera Instruction Manual

4

Release Shutter

Confirm that (in-focus indicator) appears in the viewfinder, then slowly, fully
depress the shutter release button. With a moving subject, Continuous Servo
AF (page 46) activates and camera continuously focuses on the subject.
1 Confirm indications in the viewfinder while lightly pressing
the shutter release button.
• When the subject is dark or backlit and shutter release button is lightly pressed,
the built-in Speedlight automatically pops up and starts charging (pages 40, 76).
2 Confirm that focus indicator
the shutter release button.
• After the shutter is released, the film automatically advances to the next frame
and the next shot can be taken.
32
appears and slowly depress
3 Film starts to rewind automatically when the last shot is
taken.
• is displayed during film rewind.
4 Confirm that film is completely rewound, then remove film
cartridge.
• Film is completely rewound when the frame counter shows blinking
panel. ( appears without blinking when the exposure meter is off.) Make sure the
film is completely rewound ( is blinking in the LCD panel), open the camera back
away from sunlight and remove the film cartridge.
Check points
• If any other warning indications appear, see page 103.
• For mid-roll rewind, see page 72.
in the LCD
33