Download Print this page

Advertisement

Quick Links

MODERN COLORS COLLECTION
Read all instructions before assembling bunk bed and keep these instructions for future reference.
-
Before each usage or assembly, inspect bunk bed for damaged hardware, loose joints, missing
-
parts, or sharp edges. DO NOT Use bunk bed if any parts are missing or broken.
DO NOT Use substitute parts. Contact your local Rooms To Go or visit www.ROOMSTOGO.COM
-
for replacement parts and instructional literature if needed.
Follow the information on the warnings appearing on the upper bunk end structure and on the carton,
-
DO NOT REMOVE WARNING LABEL FROM BED.
Always use the recommended size mattress or mattress supports, or both to help prevent the likelihood
-
of entrapment or falls.
-
Ensure thickness of mattress and foundation combine does not exceed
mattress surface is at least
Do not allow children under 6 years of age to use the upper bunk.
-
Periodically check and ensure that the guardrail, ladder, and other components are in their proper
-
position, free from damage, and that all connectors are tight.
Do not allow horseplay on or under the bed and prohibit jumping on the bed.
-
Limit top bunk use to one person.
-
Always use the ladder for entering and leaving the upper bunk.
-
Use of night light may provide added safety precaution for a child using the upper bunk.
-
Always use guardrails on both long sides of the upper bunk. If the bunk bed will be placed next to
-
the wall, the guardrail that runs the full length of the bed should be placed against the wall to
prevent entrapment between the bed and wall.
The use of water or sleep flotation mattress is prohibited.
-
This bunk bed meets all the requirements of ASTM 1427-19.
-
2/28/2024
T T H H A A N N K K Y Y O O U U F F O O R R Y Y O O U U R R P P U U R R C C H H A A S S E E
WARNING DANGER
Failure to follow these warnings and assembly instructions could result in serious
injury or death. To help prevent serious or fatal injuries from entrapment or falls:
5 inches (127mm)
STRANGULATION HAZARD:
Never attach or hang items to any part of the bunk bed that are not designed for
use with the bed; for example, but not limited to, hooks, belts, and jump ropes.
AIS12732-0
10 inches (255mm)
below upper edge of guardrails.
and
Page 1 of 66

Advertisement

loading
Need help?

Need help?

Do you have a question about the MODERN COLORS 3511123P and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for ROOMS TO GO MODERN COLORS 3511123P

  • Page 1 Before each usage or assembly, inspect bunk bed for damaged hardware, loose joints, missing parts, or sharp edges. DO NOT Use bunk bed if any parts are missing or broken. DO NOT Use substitute parts. Contact your local Rooms To Go or visit www.ROOMSTOGO.COM for replacement parts and instructional literature if needed.
  • Page 2 CONFIGURATIONS Choose your configuration, read all the instructions, identify all components, and be sure you have all parts prior to assembly Reference page 4-8 for assembly steps Reference page 9-13 for assembly steps Reference page 14-18 for assembly steps TWIN LOW LOFT W/STEP END TWIN LOW LOFT W/STEP END &...
  • Page 3 CONFIGURATIONS Choose your configuration, read all the instructions, identify all components, and be sure you have all parts prior to assembly Reference page 50-54 for assembly steps Reference page 55-60 for assembly steps Reference page 61-66 for assembly steps FULL LOW LOFT W/STEP END, CHEST, BOOKCASE FULL LOW LOFT W/STEP END, CHEST &...
  • Page 4: Parts List

    P A R T S L I S T 3511123P TWIN LOW LOFT W/STEP END D- IRON ORE RTG SKU # STYLE # ITEM DESCRIPTION 36511233 12D-163 REVERSIBLE LOW LOFT STEP UNIT 35911230 12D-164 TWIN LOW LOFT SIDE PANELS 36211237 12D-732 4 PC SIDE RAILS W/ 2 FULL LENGTH RAILS 35811238...
  • Page 5 H A R D W A R E L I S T 12-732 4 PC SIDE RAILS W/ 2 FULL LENGTH RAILS 12-403 LOW LOFT STEP UNIT Gold knobs 3x 5/16-18x80 mm bolt 16x 5 mm allen wrench 1x 5/16-18x40mm bolt 14x 4 mm allen wrench 1x 100-170 12 PC TWIN SLAT ROLL 6 x 1 1/4"...
  • Page 6 ASSEMBLY INSTRUCTIONS FIRST DETERMINE THE CONFIGURATION THAT FITS YOUR ROOM STAIRS ON THE RIGHT STAIRS ON THE LEFT STEP 1 Assembly configuration for stairs on the right side. Assembly configuration for stairs on the left side. STEP 2 STEP 3 Remove all pre-installed bolts from both sides (10 pcs) save them for next steps.
  • Page 7 ASSEMBLY INSTRUCTIONS STEP 5 STEP 4 Removed bolts from side panel (2), and from step back panel (2). Repeat process for angle side panel. save them for next step. STEP 6 Assemble step back panel STEP 7 STEP 8 Install slat roll with straps facing up, secure both end slats Assemble side rails.
  • Page 8 ASSEMBLY INSTRUCTIONS STEP 9 Assemble guardrails and tighten all bolts. MAKE SURE ALL BOLTS ARE TIGHTENED COMPLETELY AIS12732-0 Page 8 of 66 2/28/2024...
  • Page 9 P A R T S L I S T 3521123P TWIN LOW LOFT W/STEP END & CHEST D- IRON ORE RTG SKU # STYLE # ITEM DESCRIPTION 36511233 12D-163 REVERSIBLE LOW LOFT STEP UNIT 35911230 12D-164 TWIN LOW LOFT SIDE PANELS 36211237 12D-732 4 PC SIDE RAILS W/ 2 FULL LENGTH RAILS...
  • Page 10 H A R D W A R E L I S T 12-732 4 PC SIDE RAILS W/ 2 FULL LENGTH RAILS 12-403 LOW LOFT STEP UNIT Gold knobs 3x 5/16-18x80 mm bolt 16x 5 mm allen wrench 1x 5/16-18x40mm bolt 14x 4 mm allen wrench 1x 100-170 12 PC TWIN SLAT ROLL 6 x 1 1/4"...
  • Page 11 ASSEMBLY INSTRUCTIONS FIRST DETERMINE THE CONFIGURATION THAT FITS YOUR ROOM STAIRS ON THE RIGHT STAIRS ON THE LEFT STEP 1 Assembly configuration for stairs on the right side. Assembly configuration for stairs on the left side. STEP 2 STEP 3 Remove all pre-installed bolts from both sides (10 pcs) save them for next steps.
  • Page 12 ASSEMBLY INSTRUCTIONS STEP 4 STEP 5 Removed bolts from side panel (2), and from step back panel (2). Repeat process for angle side panel. save them for next step. STEP 6 Assemble step back panel STEP 7 STEP 8 Install slat roll with straps facing up, secure both end slats Assemble side rails.
  • Page 13 ASSEMBLY INSTRUCTIONS STEP 10 STEP 9 Assemble guardrails and tighten all bolts. MAKE SURE ALL BOLTS ARE TIGHTENED COMPLETELY Slide 3 drw chest under loft bed AIS12732-0 Page 13 of 66 2/28/2024...
  • Page 14 P A R T S L I S T 3541123P TWIN LOW LOFT W/STEP END & 2 CHEST D- IRON ORE RTG SKU # STYLE # ITEM DESCRIPTION 36511233 12D-163 REVERSIBLE LOW LOFT STEP UNIT 35911230 12D-164 TWIN LOW LOFT SIDE PANELS 36211237 12D-732 4 PC SIDE RAILS W/ 2 FULL LENGTH RAILS...
  • Page 15 H A R D W A R E L I S T 12-732 4 PC SIDE RAILS W/ 2 FULL LENGTH RAILS 12-403 LOW LOFT STEP UNIT Gold knobs 3x 5/16-18x80 mm bolt 16x 5 mm allen wrench 1x 5/16-18x40mm bolt 14x 4 mm allen wrench 1x 100-170 12 PC TWIN SLAT ROLL 6 x 1 1/4"...
  • Page 16 ASSEMBLY INSTRUCTIONS FIRST DETERMINE THE CONFIGURATION THAT FITS YOUR ROOM STAIRS ON THE RIGHT STAIRS ON THE LEFT STEP 1 Assembly configuration for stairs on the right side. Assembly configuration for stairs on the left side. STEP 2 STEP 3 Remove all pre-installed bolts from both sides (10 pcs) save them for next steps.
  • Page 17 ASSEMBLY INSTRUCTIONS STEP 4 STEP 5 Removed bolts from side panel (2), and from step back panel (2). Repeat process for angle side panel. save them for next step. STEP 6 Assemble step back panel STEP 7 STEP 8 Install slat roll with straps facing up, secure both end slats Assemble side rails.
  • Page 18 ASSEMBLY INSTRUCTIONS STEP 10 STEP 9 Assemble guardrails and tighten all bolts. MAKE SURE ALL BOLTS ARE TIGHTENED COMPLETELY Slide 3 drw chest under loft bed STEP 11 Slide 2nd 3 drw chest under loft bed AIS12732-0 Page 18 of 66 2/28/2024...
  • Page 19 P A R T S L I S T 3531123P TWIN LOW LOFT W/STEP END, CHEST & BOOKCASE D- IRON ORE RTG SKU # STYLE # ITEM DESCRIPTION 36511233 12D-163 REVERSIBLE LOW LOFT STEP UNIT 35911230 12D-164 TWIN LOW LOFT SIDE PANELS 36211237 12D-732 4 PC SIDE RAILS W/ 2 FULL LENGTH RAILS...
  • Page 20 H A R D W A R E L I S T 12-732 4 PC SIDE RAILS W/ 2 FULL LENGTH RAILS 12-403 LOW LOFT STEP UNIT Gold knobs 3x 5/16-18x80 mm bolt 16x 5 mm allen wrench 1x 5/16-18x40mm bolt 14x 4 mm allen wrench 1x 100-170 12 PC TWIN SLAT ROLL 6 x 1 1/4"...
  • Page 21 ASSEMBLY INSTRUCTIONS FIRST DETERMINE THE CONFIGURATION THAT FITS YOUR ROOM STAIRS ON THE RIGHT STAIRS ON THE LEFT STEP 1 Assembly configuration for stairs on the right side. Assembly configuration for stairs on the left side. STEP 2 STEP 3 Remove all pre-installed bolts from both sides (10 pcs) save them for next steps.
  • Page 22 ASSEMBLY INSTRUCTIONS STEP 4 STEP 5 Removed bolts from side panel (2), and from step back panel (2). Repeat process for angle side panel. save them for next step. STEP 6 Assemble step back panel STEP 7 STEP 8 Install slat roll with straps facing up, secure both end slats Assemble side rails.
  • Page 23 ASSEMBLY INSTRUCTIONS STEP 10 STEP 9 Assemble guardrails and tighten all bolts. MAKE SURE ALL BOLTS ARE TIGHTENED COMPLETELY Slide 3 drw chest under loft bed STEP 11 Slide bookcase under loft bed 2/28/2024 AIS12732-0 Page 23 of 66...
  • Page 24 P A R T S L I S T 3551123P TWIN LOW LOFT W/STEP END, CHEST & DESK D- IRON ORE RTG SKU # STYLE # ITEM DESCRIPTION 36511233 12D-163 REVERSIBLE LOW LOFT STEP UNIT 35911230 12D-164 TWIN LOW LOFT SIDE PANELS 36211237 12D-732 4 PC SIDE RAILS W/ 2 FULL LENGTH RAILS...
  • Page 25 H A R D W A R E L I S T 12-732 4 PC SIDE RAILS W/ 2 FULL LENGTH RAILS 12-403 LOW LOFT STEP UNIT Gold knobs 3x 5/16-18x80 mm bolt 16x 5 mm allen wrench 1x 5/16-18x40mm bolt 14x 4 mm allen wrench 1x 100-170 12 PC TWIN SLAT ROLL 6 x 1 1/4"...
  • Page 26 ASSEMBLY INSTRUCTIONS FIRST DETERMINE THE CONFIGURATION THAT FITS YOUR ROOM STAIRS ON THE RIGHT STAIRS ON THE LEFT STEP 1 Assembly configuration for stairs on the right side. Assembly configuration for stairs on the left side. STEP 2 STEP 3 Remove all pre-installed bolts from both sides (10 pcs) save them for next steps.
  • Page 27 ASSEMBLY INSTRUCTIONS STEP 4 STEP 5 Removed bolts from side panel (2), and from step back panel (2). Repeat process for angle side panel. save them for next step. STEP 6 Assemble step back panel STEP 7 STEP 8 Install slat roll with straps facing up, secure both end slats Assemble side rails.
  • Page 28 ASSEMBLY INSTRUCTIONS STEP 10 STEP 9 Assemble guardrails and tighten all bolts. MAKE SURE ALL BOLTS ARE TIGHTENED COMPLETELY Slide 3 drw chest under loft bed STEP 12 STEP 11 Install casters in all desk posts Slide caster desk under loft bed 2/28/2024 AIS12732-0 Page 28 of 66...
  • Page 29 P A R T S L I S T 3561123P TWIN LOW LOFT W/STEP END,CHEST,BOOKCASE&DESK D-IRON ORE RTG SKU # STYLE # ITEM DESCRIPTION 36511233 12D-163 REVERSIBLE LOW LOFT STEP UNIT 35911230 12D-164 TWIN LOW LOFT SIDE PANELS 36211237 12D-732 4 PC SIDE RAILS W/ 2 FULL LENGTH RAILS 35811238 12D-702...
  • Page 30 H A R D W A R E L I S T 12-732 4 PC SIDE RAILS W/ 2 FULL LENGTH RAILS 12-403 LOW LOFT STEP UNIT Gold knobs 3x 5/16-18x80 mm bolt 16x 5 mm allen wrench 1x 5/16-18x40mm bolt 14x 4 mm allen wrench 1x 100-170 12 PC TWIN SLAT ROLL 6 x 1 1/4"...
  • Page 31 ASSEMBLY INSTRUCTIONS FIRST DETERMINE THE CONFIGURATION THAT FITS YOUR ROOM STAIRS ON THE RIGHT STAIRS ON THE LEFT STEP 1 Assembly configuration for stairs on the right side. Assembly configuration for stairs on the left side. STEP 2 STEP 3 Remove all pre-installed bolts from both sides (10 pcs) save them for next steps.
  • Page 32 ASSEMBLY INSTRUCTIONS STEP 4 STEP 5 Removed bolts from side panel (2), and from step back panel (2). Repeat process for angle side panel. save them for next step. STEP 6 Assemble step back panel STEP 7 STEP 8 Install slat roll with straps facing up, secure both end slats Assemble side rails.
  • Page 33 ASSEMBLY INSTRUCTIONS STEP 9 STEP 10 Assemble guardrails and tighten all bolts. MAKE SURE ALL BOLTS ARE TIGHTENED COMPLETELY Slide 3 drw chest under loft bed STEP 12 STEP 11 Slide bookcase under loft bed Install casters in all desk posts STEP 13 Slide caster desk under loft bed AIS12732-0...
  • Page 34 2/28/2024 AIS12732-0 Page 34 of 40...
  • Page 35 P A R T S L I S T 3611123P FULL LOW LOFT W/STEP END D- IRON ORE RTG SKU # STYLE # ITEM DESCRIPTION 36511233 12D-163 REVERSIBLE LOW LOFT STEP UNIT 36111235 12D-165 FULL LOW LOFT SIDE PANELS 36211237 12D-732 4 PC SIDE RAILS W/ 2 FULL LENGTH RAILS 36011233...
  • Page 36 H A R D W A R E L I S T 12-732 4 PC SIDE RAILS W/ 2 FULL LENGTH RAILS 12-403 LOW LOFT STEP UNIT Gold knobs 3x 5/16-18x80 mm bolt 16x 5 mm allen wrench 1x 5/16-18x40mm bolt 14x 4 mm allen wrench 1x 100-170 12 PC FULL SLAT ROLL 6 x 1 1/4"...
  • Page 37 ASSEMBLY INSTRUCTIONS FIRST DETERMINE THE CONFIGURATION THAT FITS YOUR ROOM STAIRS ON THE RIGHT STAIRS ON THE LEFT STEP 1 Assembly configuration for stairs on the right side. Assembly configuration for stairs on the left side. STEP 2 STEP 3 Remove all pre-installed bolts from both sides (10 pcs) save them for next steps.
  • Page 38 ASSEMBLY INSTRUCTIONS STEP 4 STEP 5 Removed bolts from side panel (2), and from step back panel (2). Repeat process for angle side panel. save them for next step. STEP 6 Assemble step back panel STEP 7 STEP 8 Install slat roll with straps facing up, secure both end slats Assemble side rails.
  • Page 39 ASSEMBLY INSTRUCTIONS STEP 10 STEP 9 Assemble guardrails and tighten all bolts. MAKE SURE ALL BOLTS ARE TIGHTENED COMPLETELY AIS12732-0 Page 39 of 66 2/28/2024...
  • Page 40 P A R T S L I S T 3621123P FULL LOW LOFT W/STEP END & CHEST D- IRON ORE RTG SKU # STYLE # ITEM DESCRIPTION 36511233 12D-163 REVERSIBLE LOW LOFT STEP UNIT 36111235 12D-165 FULL LOW LOFT SIDE PANELS 36211237 12D-732 4 PC SIDE RAILS W/ 2 FULL LENGTH RAILS...
  • Page 41 H A R D W A R E L I S T 12-732 4 PC SIDE RAILS W/ 2 FULL LENGTH RAILS 12-403 LOW LOFT STEP UNIT Gold knobs 3x 5/16-18x80 mm bolt 16x 5 mm allen wrench 1x 5/16-18x40mm bolt 14x 4 mm allen wrench 1x 100-170 12 PC FULL SLAT ROLL 6 x 1 1/4"...
  • Page 42 ASSEMBLY INSTRUCTIONS FIRST DETERMINE THE CONFIGURATION THAT FITS YOUR ROOM STAIRS ON THE RIGHT STAIRS ON THE LEFT STEP 1 Assembly configuration for stairs on the right side. Assembly configuration for stairs on the left side. STEP 2 STEP 3 Remove all pre-installed bolts from both sides (10 pcs) save them for next steps.
  • Page 43 ASSEMBLY INSTRUCTIONS STEP 4 STEP 5 Removed bolts from side panel (2), and from step back panel (2). Repeat process for angle side panel. save them for next step. STEP 6 Assemble step back panel STEP 7 STEP 8 Install slat roll with straps facing up, secure both end slats Assemble side rails.
  • Page 44 ASSEMBLY INSTRUCTIONS STEP 9 STEP 10 Assemble guardrails and tighten all bolts. MAKE SURE ALL BOLTS ARE TIGHTENED COMPLETELY Slide 3 drw chest under loft bed 2/28/2024 AIS12732-0 Page 44 of 66...
  • Page 45 P A R T S L I S T 3641123P FULL LOW LOFT W/STEP END & 2 CHEST D- IRON ORE RTG SKU # STYLE # ITEM DESCRIPTION 36511233 12D-163 REVERSIBLE LOW LOFT STEP UNIT 36111235 12D-165 FULL LOW LOFT SIDE PANELS 36211237 12D-732 4 PC SIDE RAILS W/ 2 FULL LENGTH RAILS...
  • Page 46 H A R D W A R E L I S T 12-732 4 PC SIDE RAILS W/ 2 FULL LENGTH RAILS 12-403 LOW LOFT STEP UNIT Gold knobs 3x 5/16-18x80 mm bolt 16x 5 mm allen wrench 1x 5/16-18x40mm bolt 14x 4 mm allen wrench 1x 100-170 12 PC FULL SLAT ROLL 6 x 1 1/4"...
  • Page 47 ASSEMBLY INSTRUCTIONS FIRST DETERMINE THE CONFIGURATION THAT FITS YOUR ROOM STAIRS ON THE RIGHT STAIRS ON THE LEFT STEP 1 Assembly configuration for stairs on the right side. Assembly configuration for stairs on the left side. STEP 2 STEP 3 Remove all pre-installed bolts from both sides (10 pcs) save them for next steps.
  • Page 48 ASSEMBLY INSTRUCTIONS STEP 5 STEP 4 Removed bolts from side panel (2), and from step back panel (2). Repeat process for angle side panel. save them for next step. STEP 6 Assemble step back panel STEP 7 STEP 8 Install slat roll with straps facing up, secure both end slats Assemble side rails.
  • Page 49 ASSEMBLY INSTRUCTIONS STEP 9 STEP 10 Assemble guardrails and tighten all bolts. MAKE SURE ALL BOLTS ARE TIGHTENED COMPLETELY Slide 3 drw chest under loft bed STEP 11 Slide 2nd 3 drw chest under loft bed 2/28/2024 AIS12732-0 Page 49 of 66...
  • Page 50 P A R T S L I S T 3631123P FULL LOW LOFT W/STEP END, CHEST & BOOKCASE D- IRON ORE RTG SKU # STYLE # ITEM DESCRIPTION 36511233 12D-163 REVERSIBLE LOW LOFT STEP UNIT 36111235 12D-165 FULL LOW LOFT SIDE PANELS 36211237 12D-732 4 PC SIDE RAILS W/ 2 FULL LENGTH RAILS...
  • Page 51 H A R D W A R E L I S T 12-732 4 PC SIDE RAILS W/ 2 FULL LENGTH RAILS 12-403 LOW LOFT STEP UNIT Gold knobs 3x 5/16-18x80 mm bolt 16x 5 mm allen wrench 1x 5/16-18x40mm bolt 14x 4 mm allen wrench 1x 100-170 12 PC FULL SLAT ROLL 6 x 1 1/4"...
  • Page 52 ASSEMBLY INSTRUCTIONS FIRST DETERMINE THE CONFIGURATION THAT FITS YOUR ROOM STAIRS ON THE RIGHT STAIRS ON THE LEFT STEP 1 Assembly configuration for stairs on the right side. Assembly configuration for stairs on the left side. STEP 2 STEP 3 Remove all pre-installed bolts from both sides (10 pcs) save them for next steps.
  • Page 53 ASSEMBLY INSTRUCTIONS STEP 5 STEP 4 Removed bolts from side panel (2), and from step back panel (2). Repeat process for angle side panel. save them for next step. STEP 6 Assemble step back panel STEP 7 STEP 8 Install slat roll with straps facing up, secure both end slats Assemble side rails.
  • Page 54 ASSEMBLY INSTRUCTIONS STEP 9 STEP 10 Assemble guardrails and tighten all bolts. MAKE SURE ALL BOLTS ARE TIGHTENED COMPLETELY Slide 3 drw chest under loft bed STEP 11 Slide bookcase under loft bed 2/28/2024 AIS12732-0 Page 54 of 66...
  • Page 55 P A R T S L I S T 3651123P FULL LOW LOFT W/STEP END, CHEST & DESK D- IRON ORE RTG SKU # STYLE # ITEM DESCRIPTION 36511233 12D-163 REVERSIBLE LOW LOFT STEP UNIT 36111235 12D-165 FULL LOW LOFT SIDE PANELS 36211237 12D-732 4 PC SIDE RAILS W/ 2 FULL LENGTH RAILS...
  • Page 56 H A R D W A R E L I S T 12-732 4 PC SIDE RAILS W/ 2 FULL LENGTH RAILS 12-403 LOW LOFT STEP UNIT Gold knobs 3x 5/16-18x80 mm bolt 16x 5 mm allen wrench 1x 5/16-18x40mm bolt 14x 4 mm allen wrench 1x 100-170 12 PC FULL SLAT ROLL 6 x 1 1/4"...
  • Page 57 ASSEMBLY INSTRUCTIONS FIRST DETERMINE THE CONFIGURATION THAT FITS YOUR ROOM STAIRS ON THE RIGHT STAIRS ON THE LEFT STEP 1 Assembly configuration for stairs on the right side. Assembly configuration for stairs on the left side. STEP 2 STEP 3 Remove all pre-installed bolts from both sides (10 pcs) save them for next steps.
  • Page 58 ASSEMBLY INSTRUCTIONS STEP 4 STEP 5 Removed bolts from side panel (2), and from step back panel (2). Repeat process for angle side panel. save them for next step. STEP 6 Assemble step back panel STEP 7 STEP 8 Install slat roll with straps facing up, secure both end slats Assemble side rails.
  • Page 59 ASSEMBLY INSTRUCTIONS STEP 9 STEP 10 Assemble guardrails and tighten all bolts. MAKE SURE ALL BOLTS ARE TIGHTENED COMPLETELY Slide 3 drw chest under loft bed STEP 11 STEP 12 Install casters in all desk posts Slide caster desk under loft bed AIS12732-0 Page 59 of 66 2/28/2024...
  • Page 60 2/28/2024 Page 60 of 66...
  • Page 61 P A R T S L I S T 3661123P FULL LOW LOFT W/STEP END,CHEST DESK&BOOKCASE D-IRON ORE RTG SKU # STYLE # ITEM DESCRIPTION 36511233 12D-163 REVERSIBLE LOW LOFT STEP UNIT 36111235 12D-165 FULL LOW LOFT SIDE PANELS 36211237 12D-732 4 PC SIDE RAILS W/ 2 FULL LENGTH RAILS 36011233...
  • Page 62 H A R D W A R E L I S T 12-732 4 PC SIDE RAILS W/ 2 FULL LENGTH RAILS 12-403 LOW LOFT STEP UNIT Gold knobs 3x 5/16-18x80 mm bolt 16x 5 mm allen wrench 1x 5/16-18x40mm bolt 14x 4 mm allen wrench 1x 100-170 12 PC FULL SLAT ROLL 6 x 1 1/4"...
  • Page 63 ASSEMBLY INSTRUCTIONS FIRST DETERMINE THE CONFIGURATION THAT FITS YOUR ROOM STAIRS ON THE RIGHT STAIRS ON THE LEFT STEP 1 Assembly configuration for stairs on the right side. Assembly configuration for stairs on the left side. STEP 2 STEP 3 Remove all pre-installed bolts from both sides (10 pcs) save them for next steps.
  • Page 64 ASSEMBLY INSTRUCTIONS STEP 4 STEP 5 Removed bolts from side panel (2), and from step back panel (2). Repeat process for angle side panel. save them for next step. STEP 6 Assemble step back panel STEP 7 STEP 8 Install slat roll with straps facing up, secure both end slats Assemble side rails.
  • Page 65 ASSEMBLY INSTRUCTIONS STEP 9 STEP 10 Assemble guardrails and tighten all bolts. MAKE SURE ALL BOLTS ARE TIGHTENED COMPLETELY Slide 3 drw chest under loft bed STEP 11 STEP 12 Slide bookcase under loft bed Install casters in all desk posts STEP 13 Slide caster desk under loft bed AIS12732-0...
  • Page 66 2/28/2024 Page 66 of 66...