Download Print this page

Advertisement

Quick Links

MODERN COLORS COLLECTION
Read all instructions before assembling bunk bed and keep these instructions for future reference.
-
Before each usage or assembly, inspect bunk bed for damaged hardware, loose joints, missing
-
parts, or sharp edges. DO NOT Use bunk bed if any parts are missing or broken.
DO NOT Use substitute parts. Contact your local Rooms To Go or visit www.ROOMSTOGO.COM
-
for replacement parts and instructional literature if needed.
Follow the information on the warnings appearing on the upper bunk end structure and on the carton,
-
DO NOT REMOVE WARNING LABEL FROM BED.
Always use the recommended size mattress or mattress supports, or both to help prevent the likelihood
-
of entrapment or falls.
-
Ensure thickness of mattress and foundation combine does not exceed
mattress surface is at least
Do not allow children under 6 years of age to use the upper bunk.
-
Periodically check and ensure that the guardrail, ladder, and other components are in their proper
-
position, free from damage, and that all connectors are tight.
Do not allow horseplay on or under the bed and prohibit jumping on the bed.
-
Limit top bunk use to one person.
-
Always use the ladder for entering and leaving the upper bunk.
-
Use of night light may provide added safety precaution for a child using the upper bunk.
-
Always use guardrails on both long sides of the upper bunk. If the bunk bed will be placed next to
-
the wall, the guardrail that runs the full length of the bed should be placed against the wall to
prevent entrapment between the bed and wall.
The use of water or sleep flotation mattress is prohibited.
-
This bunk bed meets all the requirements of ASTM 1427-19.
-
2/28/2024
T H A N K Y O U F O R Y O U R P U R C H A S E
WARNING DANGER
Failure to follow these warnings and assembly instructions could result in serious
injury or death. To help prevent serious or fatal injuries from entrapment or falls:
5 inches (127mm)
STRANGULATION HAZARD:
Never attach or hang items to any part of the bunk bed that are not designed for
use with the bed; for example, but not limited to, hooks, belts, and jump ropes.
AIS12733-0
10 inches (255mm)
below upper edge of guardrails.
and
Page
1
of
40

Advertisement

loading
Need help?

Need help?

Do you have a question about the KIDS MODERN COLORS 3461123P and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for ROOMS TO GO KIDS MODERN COLORS 3461123P

  • Page 1 Before each usage or assembly, inspect bunk bed for damaged hardware, loose joints, missing parts, or sharp edges. DO NOT Use bunk bed if any parts are missing or broken. DO NOT Use substitute parts. Contact your local Rooms To Go or visit www.ROOMSTOGO.COM for replacement parts and instructional literature if needed.
  • Page 2 CONFIGURATIONS Choose your configuration, read all the instructions, identify all components, and be sure you have all parts prior to assembly Reference page 3-6 for assembly steps Reference page 7-10 for assembly steps Reference page 11-14 for assembly steps TWIN LOW LOFT BED WITH LADDER TWIN LOW LOFT W/LADDER, CHEST TWIN LOW LOFT W/LADDER, 2 CHEST 3461123P IRON ORE...
  • Page 3: Parts List

    P A R T S L I S T 3461123P TWIN LOW LOFT BED WITH LADDER D- IRON ORE RTG SKU # STYLE # ITEM DESCRIPTION 35811238 12D-702 TWIN LOW LOFT BUNK END 35811238 12D-702 TWIN LOW LOFT BUNK END 36311239 12D-733 4 PC SIDE RAILS WITH 3/4 FRONT RAIL...
  • Page 4 H A R D W A R E L I S T 12-733 4 PC SIDE RAILS WITH 3/4 FRONT RAIL 100-170 12 PC TWIN SLAT ROLL 5/16-18x80 mm bolt 14x 6 x 1 1/4" Screw 10x 5 mm allen wrench 1x 4 mm allen wrench 1x 5/16-18x40mm bolt 2x 1/4-20x17 mm cup nut 2x...
  • Page 5 ASSEMBLY INSTRUCTIONS FIRST DETERMINE THE CONFIGURATION THAT FITS YOUR ROOM LADDER ON THE LEFT LADDER ON THE RIGHT STEP 1 STEP 2 Install slat roll with straps facing up, secure both end slats Assemble side rails. with 1 1/4 screws then fasten the rest of the pre-bored slats. STEP 3 STEP 4 Assemble back guardrail and tighten all bolts.
  • Page 6 ASSEMBLY INSTRUCTIONS STEP 5 Install ladder per drawing MAKE SURE ALL BOLTS ARE TIGHTENED COMPLETELY AIS12733-0 Page 6 of 2/28/2024...
  • Page 7 P A R T S L I S T 3471123P TWIN LOW LOFT W/LADDER, CHEST D- IRON ORE RTG SKU # STYLE # ITEM DESCRIPTION 35811238 12D-702 TWIN LOW LOFT BUNK END 35811238 12D-702 TWIN LOW LOFT BUNK END 36311239 12D-733 4 PC SIDE RAILS WITH 3/4 FRONT RAIL 36411231...
  • Page 8 H A R D W A R E L I S T 12-733 4 PC SIDE RAILS WITH 3/4 FRONT RAIL 100-170 12 PC TWIN SLAT ROLL 5/16-18x80 mm bolt 14x 6 x 1 1/4" Screw 10x 12-403 CHEST 5 mm allen wrench 1x Gold pulls 2x 4 mm allen wrench 1x Gold knobs 2x...
  • Page 9 ASSEMBLY INSTRUCTIONS FIRST DETERMINE THE CONFIGURATION THAT FITS YOUR ROOM LADDER ON THE LEFT LADDER ON THE RIGHT STEP 1 STEP 2 Install slat roll with straps facing up, secure both end slats Assemble side rails. with 1 1/4 screws then fasten the rest of the pre-bored slats. STEP 3 STEP 4 Assemble back guardrail and tighten all bolts.
  • Page 10 ASSEMBLY INSTRUCTIONS STEP 5 STEP 6 Install ladder per drawing MAKE SURE ALL BOLTS ARE TIGHTENED COMPLETELY Slide 3 drw chest under loft bed AIS12733-0 Page 10 of 2/28/2024...
  • Page 11 P A R T S L I S T 3481123P TWIN LOW LOFT W/LADDER, 2 CHEST D-IRON ORE RTG SKU # STYLE # ITEM DESCRIPTION 35811238 12D-702 TWIN LOW LOFT BUNK END 35811238 12D-702 TWIN LOW LOFT BUNK END 36311239 12D-733 4 PC SIDE RAILS WITH 3/4 FRONT RAIL 36411231...
  • Page 12 H A R D W A R E L I S T 12-733 4 PC SIDE RAILS WITH 3/4 FRONT RAIL 100-170 12 PC TWIN SLAT ROLL 5/16-18x80 mm bolt 14x 6 x 1 1/4" Screw 10x 12-403 CHEST 5 mm allen wrench 1x Gold pulls 2x 4 mm allen wrench 1x Gold knobs 2x...
  • Page 13 ASSEMBLY INSTRUCTIONS FIRST DETERMINE THE CONFIGURATION THAT FITS YOUR ROOM LADDER ON THE LEFT LADDER ON THE RIGHT STEP 1 STEP 2 Install slat roll with straps facing up, secure both end slats Assemble side rails. with 1 1/4 screws then fasten the rest of the pre-bored slats. STEP 3 STEP 4 Assemble back guardrail and tighten all bolts.
  • Page 14 ASSEMBLY INSTRUCTIONS STEP 6 STEP 5 Install ladder per drawing MAKE SURE ALL BOLTS ARE TIGHTENED COMPLETELY Slide 3 drw chest under loft bed STEP 7 Slide 2nd 3 drw chest under loft bed AIS12733-0 Page 14 of 2/28/2024...
  • Page 15 P A R T S L I S T 3491123P TWIN LOW LOFT W/LADDER, CHEST, BOOKCASE D-IRON ORE RTG SKU # STYLE # ITEM DESCRIPTION 35811238 12D-702 TWIN LOW LOFT BUNK END 35811238 12D-702 TWIN LOW LOFT BUNK END 36311239 12D-733 4 PC SIDE RAILS WITH 3/4 FRONT RAIL 36411231...
  • Page 16 H A R D W A R E L I S T 12-733 4 PC SIDE RAILS WITH 3/4 FRONT RAIL 100-170 12 PC TWIN SLAT ROLL 5/16-18x80 mm bolt 14x 6 x 1 1/4" Screw 10x 12-403 CHEST 5 mm allen wrench 1x Gold pulls 2x 4 mm allen wrench 1x Gold knobs 2x...
  • Page 17 ASSEMBLY INSTRUCTIONS FIRST DETERMINE THE CONFIGURATION THAT FITS YOUR ROOM LADDER ON THE LEFT LADDER ON THE RIGHT STEP 1 STEP 2 Install slat roll with straps facing up, secure both end slats Assemble side rails. with 1 1/4 screws then fasten the rest of the pre-bored slats. STEP 3 STEP 4 Assemble back guardrail and tighten all bolts.
  • Page 18 ASSEMBLY INSTRUCTIONS STEP 6 STEP 5 Install ladder per drawing MAKE SURE ALL BOLTS ARE TIGHTENED COMPLETELY Slide 3 drw chest under loft bed STEP 7 Slide bookcase under loft bed AIS12733-0 Page 18 of 2/28/2024...
  • Page 19 P A R T S L I S T 3501123P TWIN LOW LOFT W/LADDER, CHEST, BOOKCASE, DESK D-IRON ORE RTG SKU # STYLE # ITEM DESCRIPTION 35811238 12D-702 TWIN LOW LOFT BUNK END 35811238 12D-702 TWIN LOW LOFT BUNK END 36311239 12D-733 4 PC SIDE RAILS WITH 3/4 FRONT RAIL...
  • Page 20 H A R D W A R E L I S T 12-733 4 PC SIDE RAILS WITH 3/4 FRONT RAIL 100-170 12 PC TWIN SLAT ROLL 5/16-18x80 mm bolt 14x 6 x 1 1/4" Screw 10x 12-403 CHEST 5 mm allen wrench 1x Gold pulls 2x 4 mm allen wrench 1x Gold knobs 2x...
  • Page 21 ASSEMBLY INSTRUCTIONS FIRST DETERMINE THE CONFIGURATION THAT FITS YOUR ROOM LADDER ON THE LEFT LADDER ON THE RIGHT STEP 1 STEP 2 Install slat roll with straps facing up, secure both end slats Assemble side rails. with 1 1/4 screws then fasten the rest of the pre-bored slats. STEP 3 STEP 4 Assemble back guardrail and tighten all bolts.
  • Page 22 ASSEMBLY INSTRUCTIONS STEP 6 STEP 5 Install ladder per drawing MAKE SURE ALL BOLTS ARE TIGHTENED COMPLETELY Slide 3 drw chest under loft bed STEP 7 STEP 8 Slide bookcase under loft bed Install casters in all desk posts STEP 9 Slide caster desk under loft bed AIS12733-0 Page 22 of...
  • Page 23 ASSEMBLY INSTRUCTIONS AIS12733-0 Page 23 of 2/28/2024...
  • Page 24 P A R T S L I S T 3571123P FULL LOW LOFT BED WITH LADDER D- IRON ORE RTG SKU # STYLE # ITEM DESCRIPTION 36011233 12D-703 FULL LOW LOFT BUNK END 36011233 12D-703 FULL LOW LOFT BUNK END 36311239 12D-733 4 PC SIDE RAILS WITH 3/4 FRONT RAIL...
  • Page 25 H A R D W A R E L I S T 12-733 4 PC SIDE RAILS WITH 3/4 FRONT RAIL 100-171 12 PC FULL SLAT ROLL 5/16-18x80 mm bolt 14x 6 x 1 1/4" Screw 10x 5 mm allen wrench 1x 4 mm allen wrench 1x 5/16-18x40mm bolt 2x 1/4-20x17 mm cup nut 2x...
  • Page 26 ASSEMBLY INSTRUCTIONS FIRST DETERMINE THE CONFIGURATION THAT FITS YOUR ROOM LADDER ON THE LEFT LADDER ON THE RIGHT STEP 1 STEP 2 Install slat roll with straps facing up, secure both end slats Assemble side rails. with 1 1/4 screws then fasten the rest of the pre-bored slats. STEP 3 STEP 4 Assemble back guardrail and tighten all bolts.
  • Page 27 ASSEMBLY INSTRUCTIONS STEP 6 STEP 5 Install ladder per drawing MAKE SURE ALL BOLTS ARE TIGHTENED COMPLETELY AIS12733-0 Page 27 of 40 2/28/2024...
  • Page 28 P A R T S L I S T 3581123P FULL LOW LOFT W/LADDER, CHEST D- IRON ORE RTG SKU # STYLE # ITEM DESCRIPTION 36011233 12D-703 FULL LOW LOFT BUNK END 36011233 12D-703 FULL LOW LOFT BUNK END 36311239 12D-733 4 PC SIDE RAILS WITH 3/4 FRONT RAIL 36411231...
  • Page 29 H A R D W A R E L I S T 12-733 4 PC SIDE RAILS WITH 3/4 FRONT RAIL 100-171 12 PC FULL SLAT ROLL 5/16-18x80 mm bolt 14x 6 x 1 1/4" Screw 10x 12-403 CHEST 5 mm allen wrench 1x Gold pulls 2x 4 mm allen wrench 1x Gold knobs 2x...
  • Page 30 ASSEMBLY INSTRUCTIONS FIRST DETERMINE THE CONFIGURATION THAT FITS YOUR ROOM LADDER ON THE LEFT LADDER ON THE RIGHT STEP 1 STEP 2 Install slat roll with straps facing up, secure both end slats Assemble side rails. with 1 1/4 screws then fasten the rest of the pre-bored slats. STEP 3 STEP 4 Assemble back guardrail and tighten all bolts.
  • Page 31 ASSEMBLY INSTRUCTIONS STEP 5 STEP 6 Install ladder per drawing MAKE SURE ALL BOLTS ARE TIGHTENED COMPLETELY Slide 3 drw chest under loft bed 2/28/2024 AIS12733-0 Page 31 of 40...
  • Page 32 P A R T S L I S T 3591123P FULL LOW LOFT W/LADDER, CHEST, BOOKCASE D-IRON ORE RTG SKU # STYLE # ITEM DESCRIPTION 36011233 12D-703 FULL LOW LOFT BUNK END 36011233 12D-703 FULL LOW LOFT BUNK END 36311239 12D-733 4 PC SIDE RAILS WITH 3/4 FRONT RAIL 36411231...
  • Page 33 H A R D W A R E L I S T 12-733 4 PC SIDE RAILS WITH 3/4 FRONT RAIL 100-171 12 PC FULL SLAT ROLL 5/16-18x80 mm bolt 14x 6 x 1 1/4" Screw 10x 12-403 CHEST 5 mm allen wrench 1x Gold pulls 2x 4 mm allen wrench 1x Gold knobs 2x...
  • Page 34 ASSEMBLY INSTRUCTIONS FIRST DETERMINE THE CONFIGURATION THAT FITS YOUR ROOM LADDER ON THE LEFT LADDER ON THE RIGHT STEP 1 STEP 2 Install slat roll with straps facing up, secure both end slats Assemble side rails. with 1 1/4 screws then fasten the rest of the pre-bored slats. STEP 3 STEP 4 Assemble back guardrail and tighten all bolts.
  • Page 35 ASSEMBLY INSTRUCTIONS STEP 6 STEP 5 Install ladder per drawing MAKE SURE ALL BOLTS ARE TIGHTENED COMPLETELY Slide 3 drw chest under loft bed STEP 7 Slide bookcase under loft bed AIS12733-0 Page 35 of 40 2/28/2024...
  • Page 36 P A R T S L I S T 3601123P FULL LOW LOFT W/LADDER, CHEST, BOOKCASE, DESK D-IRON ORE RTG SKU # STYLE # ITEM DESCRIPTION 36011233 12D-703 FULL LOW LOFT BUNK END 36011233 12D-703 FULL LOW LOFT BUNK END 36311239 12D-733 4 PC SIDE RAILS WITH 3/4 FRONT RAIL...
  • Page 37 H A R D W A R E L I S T 12-733 4 PC SIDE RAILS WITH 3/4 FRONT RAIL 100-171 12 PC FULL SLAT ROLL 5/16-18x80 mm bolt 14x 6 x 1 1/4" Screw 10x 12-403 CHEST 5 mm allen wrench 1x Gold pulls 2x 4 mm allen wrench 1x Gold knobs 2x...
  • Page 38 ASSEMBLY INSTRUCTIONS FIRST DETERMINE THE CONFIGURATION THAT FITS YOUR ROOM LADDER ON THE LEFT LADDER ON THE RIGHT STEP 1 STEP 2 Install slat roll with straps facing up, secure both end slats Assemble side rails. with 1 1/4 screws then fasten the rest of the pre-bored slats. STEP 3 STEP 4 Assemble back guardrail and tighten all bolts.
  • Page 39 ASSEMBLY INSTRUCTIONS STEP 6 STEP 5 Install ladder per drawing MAKE SURE ALL BOLTS ARE TIGHTENED COMPLETELY Slide 3 drw chest under loft bed STEP 8 STEP 7 Slide bookcase under loft bed Install casters in all desk posts STEP 9 Slide caster desk under loft bed 2/28/2024 AIS12733-0...
  • Page 40 ASSEMBLY INSTRUCTIONS 2/28/2024 AIS12733-0 Page 40 of 40...