Table of Contents

Advertisement

Quick Links

JETCURRENT PRO OWNER'S MANUAL
JBP-JCP-MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JETCURRENT PRO and is the answer not in the manual?

Questions and answers

Summary of Contents for Juiced Bikes JETCURRENT PRO

  • Page 1 JETCURRENT PRO OWNER’S MANUAL JBP-JCP-MANUAL...
  • Page 2: Important Safety Information

    This e-bike is under a continuous improvement policy. Thus, information, illustrations and/or specifications to explain and/or exemplify a product, service or maintenance improvement may be changed at any time without notice. For any questions our contact information can be found on page 6. © 2024 Juiced Bikes 20240408-002...
  • Page 3: Table Of Contents

    UNDERSTANDING THE PEDAL ASSIST MODES READING THE BATTERY PACK LEVEL UNDERSTANDING THE BATTERY PACK RANGE ADVANCED DISPLAY SCREEN OVERVIEW RESETTING THE TRIP COUNTER USING THE CRUISE CONTROL FUNCTION ACTIVATING THE WALK MODE USING THE SETTINGS MENU © 2024 Juiced Bikes 20240408-002...
  • Page 4 SPEED LIMIT AND NDW SETTINGS BY REGION REPLACING THE LCD INSTALLING THE LCD 5 MAINTENANCE IMPORTANT BATTERY HYDRAULIC BRAKES MINERAL OIL CUPS FRONT WHEEL INSTALLATION INSTALLING THE HANDLEBARS PRE TRIP INSPECTION 6 TROUBLESHOOTING ERROR CODES JUICED BIKES WARRANTY © 2024 Juiced Bikes 20240408-002...
  • Page 5 Folded bike view © 2024 Juiced Bikes 20240408-002...
  • Page 6: Introduction

    INTRODUCTION THANK YOU FOR CHOOSING TO BE PART OF THE JUICED BIKES TEAM. We invite you to read through this Owner’s Manual to learn about your e-bike and what owning an e-bike looks like. First and foremost, remember to be safe out there. Your bike is an accessory to your lifestyle and activities.
  • Page 7: Safety

    " Use only parts/accessories approved by Juiced Bikes, and have all installation performed by a mechanic authorized by Juiced Bikes. Installation of unauthorized parts/accessories may void the product’s warranty.
  • Page 8: Before Riding The E-Bike

    Use appropriate hand signals for turning and stopping. Do not wear headphones. Riding with a passenger can change the balance of your e-bike. Use caution when carrying a passenger and never exceed the combined weight limit of 275lbs. © 2024 Juiced Bikes 20240408-002...
  • Page 9: Off-Road Riding

    "The e-bike design has limitations regarding strength and integrity. Extreme, stunt and competition riding can exceed those limitations. The manufacturer does not recommend these types of riding. Also, extreme, stunt and competition riding increases the risks of death and serious injury. " © 2024 Juiced Bikes 20240408-002...
  • Page 10: Wet-Weather Riding

    ● Go with the flow. The safe way is the RIGHT way. ● Check for traffic. Always be aware of the traffic around you. ● Learn the rules of the road. Obey traffic laws. ● Don’t flip over your bicycle. Wheels should be securely fastened. © 2024 Juiced Bikes 20240408-002...
  • Page 11: General Information

    Throttle - The throttle allows the rider to ride the bike & control the bike’s speed without pedaling. It sends a signal to the controller telling it how much power to send to the motor. The throttle is located on the left handlebar. Fig. 2 Throttle © 2024 Juiced Bikes 20240408-002...
  • Page 12 Fig. 3 Battery Lock Mechanism Battery Pack - The battery pack stores electrical energy. It is composed of many smaller battery pack cells that act similar to that of a modern mobile phone. Fig. 4 Battery Pack © 2024 Juiced Bikes 20240408-002...
  • Page 13 Fig. 5 Advanced LCD Display Key Fob - After the initial power up with the Key, you can remove the key and use the included remote (key fob) to turn the bike ON/OFF. Fig. 6 Key Fob © 2024 Juiced Bikes 20240408-002...
  • Page 14 find a more comfortable pedaling cadence under different riding conditions. Try the low gear for pedaling during starts, uphill or loaded riding. Choose the higher gears when pedaling downhill or during faster riding. The gear shifter is located on the right handlebar Fig. 8 Gear Shifter © 2024 Juiced Bikes 20240408-002...
  • Page 15 This feature prevents unintentional accelerations while braking. Fig. 9 - Brake Lever Headlight and signaling - Your ebike comes fully equipped with lights and signaling indicators for a safer ride. Fig. 10 - Headlight and signaling © 2024 Juiced Bikes 20240408-002...
  • Page 16 Fuse - The battery pack has two replaceable 25-amp fuses that protect the electronics Fig. 11 - Fuse Folding bike - Your ebike can fold without the need to remove or add components. We recommend removing the battery for easier handling and transportation. Fig. 12 - Folded bike © 2024 Juiced Bikes 20240408-002...
  • Page 17 Folding Hinge (Stem) - The stem hinge allows you to fold your stem helping to stow your handlebar. The hinge has a security latch locking mechanism that is easy to use. Fig. 14 - Folding Hinge © 2024 Juiced Bikes 20240408-002...
  • Page 18: Electronic Modules

    ELECTRONIC MODULES Basic block diagram © 2024 Juiced Bikes 20240408-002...
  • Page 19: Specifications

    Brake Anchor Nut 8-10N.M (Nm) 5.90-7.37 ft-lb Brake Centre Bolt 6-8N.M (Nm) 4.42-5.90 ft-lb Crank Cotter Pin Nuts 35-45N.M (Nm) 28.18-33.19 ft-lb Headset Expander Nut 6-8N.M (Nm) 4.42-5.90 ft-lb Handlebar Clamp Nut 6-8N.M (Nm) 4.42-5.90 ft-lb © 2024 Juiced Bikes 20240408-002...
  • Page 20: Choosing The Right Size

    For these bikes the height of the seat post should be used to select the correct size. You should be able to touch the ground comfortably while sitting in the saddle when it is at its lowest point in the seat tube. © 2024 Juiced Bikes 20240408-002...
  • Page 21: Assembly

    Your e-bike comes fully assembled. This manual shows you how to perform the basic steps to use your ebike. Scan the QR code below for a video and updates on how to use your bike. © 2024 Juiced Bikes 20240408-002...
  • Page 22: Unfolding Your Bike - Frame

    4. Once the frame is unfolded, be sure both sides are mated flush with each other before closing the locking latch. 5. Swing the locking latch and press it into the side of the bike. You will hear the sliding lock click in place. Fig. 16 - Frame hinge latch © 2024 Juiced Bikes 20240408-002...
  • Page 23: Unfolding Your Bike - Stem

    9. To continue unfolding your bike, extend your kickstand so the bike can unfold by itself. 10. To fold the bike, follow the procedure in reverse order. UNFOLDING YOUR BIKE - STEM 11. To unfold your handlebar stem, follow the instructions below. Fig. 18 - Folded stem/handlebars © 2024 Juiced Bikes 20240408-002...
  • Page 24 17. The sliding lock should always be covering a part of the silver tab as shown in the image. Fig. 20 - Stem hinge latch locked and unlocked 18. To fold the bike, follow the procedure in the reverse order © 2024 Juiced Bikes 20240408-002...
  • Page 25: Installing The Pedals

    Fig. 22 - Installing pedals NOTE: The pedal has a pull to fold mechanism that helps you reduce the width of the folded bike. Always unfold the pedals before placing your foot and riding the bike. © 2024 Juiced Bikes 20240408-002...
  • Page 26: Battery Installation

    There is an 8 second delay after powerup before the output gets activated. This gives you time to install the battery pack while the output is OFF. Fig. 24 - Battery Power Button © 2024 Juiced Bikes 20240408-002...
  • Page 27: Adjusting Seat Height

    This will also enable the keyfob to work. Be sure your battery is safely locked in place. ADJUSTING SEAT HEIGHT 1. When adjusting seat height, be sure to keep the minimum insertion length inside the seat tube. This is marked in the seatpost. Fig. 26 - Adjusting seat height © 2024 Juiced Bikes 20240408-002...
  • Page 28: Pre Trip Inspection

    We have several videos and guides you can see at our youtube channel https://www.youtube.com/@JuicedBikes We also invite you to visit a local mechanic for tuneups that are specific to your riding style, weather and location. © 2024 Juiced Bikes 20240408-002...
  • Page 29: Operation

    The brakes will reach 100% of their grip capacity after this period. Adjust the brake lever so that it adapts to the newly bedded-in brakes. This process will only be needed to be repeated whenever you install new brake pads. © 2024 Juiced Bikes 20240408-002...
  • Page 30: Shifting Gears

    2. You can now install the battery pack onto the bike. Seat it on the bottom battery dock and swing it close to install it. 3. Turn the key counterclockwise all the way to lock the battery in place and enable your power system. Fig. 2 - Key Lock View © 2024 Juiced Bikes 20240408-002...
  • Page 31: Electric Assist

    The e-bike will now maintain a constant pedal assist until: ● The brakes are applied. ● The “+” or “-” buttons are pressed to adjust the pedal assist level. ● You stop pedaling. ● The battery pack runs down completely. © 2024 Juiced Bikes 20240408-002...
  • Page 32: Lcd (Liquid Crystal Display) Overview

    The LCD can also be used to directly adjust parameters in the Settings Menu to further customize your riding experience. Above are the 3 primary display screens. © 2024 Juiced Bikes 20240408-002...
  • Page 33: Button Overview

    The Main Display Screen will show when you turn on the e-bike for the first time. This screen provides you with the essential information needed to operate your e-bike. The Main Display Screen appears as shown below: © 2024 Juiced Bikes 20240408-002...
  • Page 34 The odometer value is the total number of miles or Km the vehicle has traveled. The Odometer can only be reset from the settings menu. The Odometer is separate from the Trip Distance. You can manually adjust the Odometer from the Settings Menu. © 2024 Juiced Bikes 20240408-002...
  • Page 35: Understanding The Electric Assist System

    Note: All Juiced e-bikes are equipped with brake sensors. If both the brake and throttle is used at the same time, the system will cut power to the motor. © 2024 Juiced Bikes 20240408-002...
  • Page 36: Pedal Assist Operation

    The torque sensor measures how much pressure you apply to the pedals. If you pedal harder, you’ll get more power from the motor. If you pedal softer, you’ll get less power to the motor. Torque measurement samples are taken 1,000 times a second, amplifying your pedaling effort in real-time. © 2024 Juiced Bikes 20240408-002...
  • Page 37 Using both Throttle and Pedal Assist together When both the throttle and pedal assist are used at the same time, the system will automatically recognize which signal will deliver better performance. This signal will be used to control the motor’s power. © 2024 Juiced Bikes 20240408-002...
  • Page 38: Understanding The Pedal Assist Modes

    Assist modes 1, 2, and 3 provide increasing levels of boost. The higher assist levels deliver more boost for quicker acceleration and higher cruising speeds. The higher assist levels will also drain the battery faster than the lower assist levels. © 2024 Juiced Bikes 20240408-002...
  • Page 39: Reading The Battery Pack Level

    When the battery pack level is low and it reaches: ● 2 Bars - Recharge battery pack soon. Select a lower pedal assist level. ● 1 Bar - Stop using the throttle; recharge the battery pack. © 2024 Juiced Bikes 20240408-002...
  • Page 40: Understanding The Battery Pack Range

    NOTICE Riding downhill or pedaling when not using the throttle will not recharge the battery pack. *default configuration **please refer to local laws & regulations before using © 2024 Juiced Bikes 20240408-002...
  • Page 41: Advanced Display Screen Overview

    (around 58.8 V.) When the pack is depleted, the voltage will be lower (around 45 V.) The voltage fluctuates when the battery is under load. Note: The voltage display is only accurate to about +/- 0.3 Volts and should not be used for any scientific measurements. © 2024 Juiced Bikes 20240408-002...
  • Page 42 flash on the screen. Trip Distance The trip distance counts up from zero. The distance is calculated by each rotation of the rear wheel. You can reset the trip distance by following the instructions in the next section. © 2024 Juiced Bikes 20240408-002...
  • Page 43: Resetting The Trip Counter

    Odometer. Once the trip counter is reset, the trip data can not be recovered. To reset the Odometer, refer to the section: “Resetting Or Adjusting The Odometer” for more information. © 2024 Juiced Bikes 20240408-002...
  • Page 44: Using The Cruise Control Function

    You can deactivate the cruise control function by doing any of the following: • Use the brakes by squeezing the brake lever • Use the throttle • Push the Assist Up or Assist Down buttons © 2024 Juiced Bikes 20240408-002...
  • Page 45: Activating The Walk Mode

    To stop using the Walk Mode: To stop using the Walk Mode, release the Assist Down Button. The motor will stop turning and resume normal operation. Using either brake lever will also stop the Walk Mode. © 2024 Juiced Bikes 20240408-002...
  • Page 46: Using The Settings Menu

    USING THE SETTINGS MENU The Settings Menu on the LCD allows you to directly adjust several parameters to further customize your riding experience. The workflow below describes the process of changing any setting: © 2024 Juiced Bikes 20240408-002...
  • Page 47 If this setting is set to 0, the power will not Delay automatically turn off. The system will stay on until your battery power is completely depleted. Note: This function is not available for e-bikes that use a key switch to power on the system. © 2024 Juiced Bikes 20240408-002...
  • Page 48 The ODO or Odometer keeps track of the total miles ridden on the e-bike. If the LCD has been 0 - 99,999 replaced, the ODO can be manually adjusted to the last known value. 0 - 62,499 © 2024 Juiced Bikes 20240408-002...
  • Page 49 Light: other vehicles in day or nighttime conditions. Switch Light Switch Always The headlight is controlled using the switch on the right side of the handlebars. © 2024 Juiced Bikes 20240408-002...
  • Page 50 2. Use the Assist Down Button to select the Light setting and push the Power Button to change the settings. 3. Use the Assist Up and Assist Down buttons to select Always On mode or Switch mode. 4. Push the Power Button to save the setting and exit the Settings Menu. © 2024 Juiced Bikes 20240408-002...
  • Page 51: Setting The Wheel Circumference

    You will now enter the Settings Menu Select the “Wheel Size” setting Use the Assist Down Button to select the “Wheel Size” Setting. The text will flash to indicate which menu item is selected. © 2024 Juiced Bikes 20240408-002...
  • Page 52 Enter the value corresponding to your e-bike model Use the Assist Up (+) or Assist Down (-) buttons to adjust the wheel circumference setting. JetCurrent Pro Wheel Size Circumference in Millimeter (mm): 1850 Exit the setup menu To save your wheel size setting and exit the Setup Menu, push the Power Button six times to return to the Main Display Screen.
  • Page 53: Resetting Or Adjusting The Odometer

    2. Use the Assist Down Button to select the “ODO” setting and press the Power Button to adjust the Odometer’s value. 3. Use the Assist Up and Assist Down buttons to enter the desired value. 4. Push the Power Button to save the setting and exit the Settings Menu. © 2024 Juiced Bikes 20240408-002...
  • Page 54: Understanding The Low Volts Setting

    Note: If the Low Volts setting is set too high and the battery is not fully charged before you start your ride, you may experience reduced performance and range shortly after beginning your trip. In this situation, you may need to reduce the Low Volt setting to the recommended 42V. © 2024 Juiced Bikes 20240408-002...
  • Page 55: Configuring The Vehicle's Top Speed And E-Bike Class

    There are two e-bike performance settings that you can modify to comply with the vehicle type classifications appropriate for your region. 1. Speed Limit Setting: Sets the maximum speed of the pedal assist. 2. Maximum Assist Mode: The “NDW” setting sets the maximum pedal assist mode available. © 2024 Juiced Bikes 20240408-002...
  • Page 56: Setting The Vehicle's Pedal Assist Top Speed

    1. Turn the e-bike on. Press and hold the Assist Up “+” and Assist Down “-” buttons together for 3 seconds, then release. You will now enter the Settings Menu. 2. Use the Assist Down Button to select the “Speed Limit” setting. The text will flash to indicate which menu item is selected. © 2024 Juiced Bikes 20240408-002...
  • Page 57 5. To save your speed limit setting and exit the Setup Menu, push the Power Button 3 times to return to the Main Display Screen. The updated speed limit is now set. Note: Setting the speed limit value higher than the motor’s physical speed capability will NOT increase your e-bike’s performance. © 2024 Juiced Bikes 20240408-002...
  • Page 58: Setting The Vehicle's Maximum Assist Level (Ndw Setting)

    1. Turn the e-bike on. Press and hold the Assist Up “+” and Assist Down “-” buttons together for 3 seconds, then release. You will now enter the Settings Menu. 2. Use the Assist Down Button to select the “NDW” Setting. The text will flash to indicate which menu item is selected. © 2024 Juiced Bikes 20240408-002...
  • Page 59 4. Use the Assist Up (+) or Assist Down (-) buttons to adjust your desired NDW value. 5. To save your NDW setting and exit the Setup Menu, push the Power Button 5 times to return to the Main Display Screen. The maximum assist level will be set. © 2024 Juiced Bikes 20240408-002...
  • Page 60: Enabling Race Mode

    3. Use the Assist Up and Assist Down buttons to set the NDW to “5”. 4. Push the Power Button 5 times to save the setting and exit the Settings Menu. Race Mode “R” can now be selected while riding the vehicle. © 2024 Juiced Bikes 20240408-002...
  • Page 61 The gear following function is only active in Race Mode. Warning: Turn the e-bike’s power completely off when performing any service to the rear wheel to avoid risk of injury. © 2024 Juiced Bikes 20240408-002...
  • Page 62: Speed Limit And Ndw Settings By Region

    Note: If your maximum pedal assist speed is set above 20 mph, you may need to display the “Class 3” Label located under the Class 2 Label. Check your local regulations regarding Class 3 use on public roads and bike paths. © 2024 Juiced Bikes 20240408-002...
  • Page 63: Replacing The Lcd

    3. Before turning on the e-bike, ensure the LCD is fully connected to the e-bike’s wire harness. Note: If you only need the replacement bracket and screws used to fasten the LCD, purchase the replacement part: W780 LCD Display Bracket and Screw Replacement Kit (JBP-LCD-BRKT-KIT) © 2024 Juiced Bikes 20240408-002...
  • Page 64: Maintenance

    Failure to properly charge, store or use the battery will void the warranty. Use caution when handling the battery pack as it is heavy. REMOVING THE BATTERY PACK You can remove the battery pack from the bike. Remove the battery pack when storing or transporting the e-bike. © 2024 Juiced Bikes 20240408-002...
  • Page 65: Charging The Battery Pack

    ● Do not cover the body of the charger when charging. ● Do not drop the charger or subject it to high vibration. Do not use a charger that has been dropped ● Do not short-circuit the battery pack’s terminals. © 2024 Juiced Bikes 20240408-002...
  • Page 66 ● Be sure to use the proper charging profile if using the Cycle Satiator® charger. The max charging voltage should never exceed 58.8V ● The battery pack can be charged while connected to the e-bike or while removed from the e-bike. (See “Removing the Battery Pack” on page 64.) © 2024 Juiced Bikes 20240408-002...
  • Page 67: Hydraulic Brakes

    If the hydraulic brakes are worn, replacement will be needed. When a replacement is needed varies by amount of time riding, mileage, riding style and location. We recommend inspecting your brakes before every ride. © 2024 Juiced Bikes 20240408-002...
  • Page 68: Mineral Oil Cups

    22. You can screw the bolt that keeps the security tab in place. 23. Add the washer and axle nut on each side. Hand turn until snug. 24. When both axle nuts are installed, you can finish fastening them applying the recommended torque of 35-45 Nm. © 2024 Juiced Bikes 20240408-002...
  • Page 69: Installing The Handlebars

    6. Holding the handlebar in place, install the stem plate on top, lining up the holes. 7. Insert the bolts and washers back through the holes and tighten on alternating sides until the handlebar is secure. © 2024 Juiced Bikes 20240408-002...
  • Page 70: Pre Trip Inspection

    We have several videos and guides you can see at our youtube channel https://www.youtube.com/@juicedbikes. We also invite you to visit a local mechanic for tuneups that are specific to your riding style, weather and location. © 2024 Juiced Bikes 20240408-002...
  • Page 71: Troubleshooting

    • Issue with battery • Contact Support Team E-bike making strange • Loose hardware • Tune-up and inspection noisesE-bike making strange • Issue on drivetrain needed noises • Issue with motor • Maintenance needed • Contact Support Team © 2024 Juiced Bikes 20240408-002...
  • Page 72: Error Codes

    Check all cable connections. Check for corrosion damage. This can also be caused by a damaged cable. For additional troubleshooting, go to our FAQ section on our website at: https://support.juicedbikes.com/troubleshoot Or contact us at: https://juicedbikes.com/contact © 2024 Juiced Bikes 20240408-002...
  • Page 73: Juiced Bikes Warranty

    JUICED BIKES WARRANTY http://www.JuicedBikes.com/pages/warranty At Juiced Bikes, we take great pride in the quality and durability of our products. We’re confident that you will be impressed as well, and we stand behind all of our products. Every e-vehicle we sell is covered by a limited warranty against manufacturing defects subject to the...
  • Page 74 ● Cleaning of any PRODUCTS ● PRODUCTS that were not purchased by BUYER in new condition ● JUICED BIKES will not pay for any third-party service or part replacement unless agreed upon prior to the fix. © 2024 Juiced Bikes...
  • Page 75 ● JUICED BIKES will not cover any damage resulting in the use of a third-party battery charger. ● JUICED BIKES will not cover any damage that may occur during shipping if the owner sets up their own shipping option or if the bike is shipped using a freight forwarder or similar service.
  • Page 76: Shipping Damage Claims

    Take pictures of any damage that is found, and date the images when possible. Keep all packaging and paperwork until the inspection process is complete. Whenever possible, report damage claims within 10 days of delivery to a Juiced Bikes’ customer support representative. Please contact our Customer Support team for return/replacement instructions at: support@juicedbikes.com | (888) 303-8889 ext 2.
  • Page 77 Notes: © 2024 Juiced Bikes 20240408-002...
  • Page 78 Notes: © 2024 Juiced Bikes 20240408-002...
  • Page 79 Notes: © 2024 Juiced Bikes 20240408-002...
  • Page 80 JUICED BIKES 7025 ALAMITOS AVE SAN DIEGO, CA 92154 888-303-8889 JUICEDBIKES.COM © 2024 Juiced Bikes 20240408-002...

Table of Contents