Do you have a question about the ODK U500 and is the answer not in the manual?
Questions and answers
Gerry A Mann
March 21, 2025
I need 4 pin replacement charger
1 comments:
Mr. Anderson
March 21, 2025
You can contact [email protected] to get a 2A charger for the Juiced Bikes ODK U500. Alternatively, you can search on Amazon or eBay for a Lithium battery charger with a 4-pin XLR connector and the correct voltage, ensuring it has a UL rating for safety.
Charging the Battery The Juiced U500 V3 features a high-capacity Lithium Ion rechargeable battery. Charge the battery fully before your first use. The charger that came with your U500 recognizes the battery pack’s initial charge and will automatically cease charging when the battery is fully charged;...
Page 4
Turning the bicycle ON and OFF The electric bicycle can be ridden like a normal bicycle with the power turned ON or OFF. However the throttle will be active only if the power is turned on. • Locate the power switch on the front face of the battery. •...
Page 5
Using the twist throttle The motor speed is controlled with a twist throttle similar to a motorcycle. The farther you twist the throttle backwards, the faster the bike will travel. • Sit with a comfortable position on the bicycle's seat. •...
Using the Brakes The bike comes equipped with front and rear Tektro Dorado hydraulic disc brakes; the very best available for e-bikes. The brakes’ main function is to slow down or to stop the bicycle. • The brake on the front wheel is controlled by the lever on the left- hand side of the handlebar •...
Page 7
Shifting the gears Your U500 V3 comes equipped with a 3-speed internally geared hub. 1 gear is useful for starting off from a stop or when riding slowly or climbing steep hills. 3 is most effective when riding at speed. 2 fits into the space between.
Using the cruise control The cruise control system can be used to maintain a constant speed. It works similar to a cruise control in an automobile. The cruise control will deactivate if the brakes are applied, if the throttle is moved, or if the CRUISE button pushed again. The bicycle will return to normal operation.
Page 9
How to read the battery level There are 4 LED lights on the display panel which will give you an indication of the batteryʼs voltage. Because the battery gauge measures voltage, only an approximate estimation of the battery's state can be obtained. The battery’s voltage can vary greatly depending on a variety of conditions.
Page 10
Understanding Battery Range All electric bicycles have a riding range that can vary greatly depending on how it is ridden, terrain, tire pressure, temperature, payload and wind. After a few rides, you will get a sense of the electric bicycle’s range capability. Factors that will decrease your range: •...
Page 11
Battery Information and Safety About the Lithium battery Your Lithium battery does not have a “memory effect” associated with older battery technologies. It is highly recommended you charge the battery after every ride even if the battery is only lightly used.
Page 12
Key parts of the electric bicycle An electric bicycle is a lot like a normal bicycle. The major difference is the inclusion of a motor which provides a boost when desired. An onboard rechargeable lithium battery supplies the motor with electric power.
Key parts of the electric bicycle (continued) Gear Shifter The gear shifter changes the ratio between the pedals and the rear wheel. It is used to find a more comfortable pedaling cadence under different riding conditions. The low gear is used for pedaling during starts, uphill or loaded riding.
Page 14
Adjusting the bicycle for riding comfort 1. Adjusting the seat height Pull the seat clamp lever outward to loosen the seat post. Adjust the seat the desired height. The maximum height should not extend beyond minimum extension mark marked on the seat post. Tighten the seat clamp and close the lever to lock in the seat’s height.
Important Safety Information Basic Bicycle Safety • Always wear a helmet. • Use a light and wear reflective clothing when riding at night. • Reduce speed when riding on a wet surface. • Properly inflate tires. • Apply the rear brake before using front brake in low traction conditions. •...
Page 16
Electric Bicycle Safety • For maximum stability, avoid accelerating or braking while turning. • Avoid riding in extremely wet conditions. • Do not leave the electric bicycle in the rain. • Discontinue the use of the electric bicycle if the battery pack is damaged due to crash or a drop.
Page 19
Baskets, lights, passenger seats- EVERYTHING! Use only parts/accessories approved by Juiced Bikes, and have all installation performed by a Juiced-authorized mechanic. Installation of unauthorized parts/accessories may void the product’s warranty. In addition, Improper installation of any parts/accessories as well as improper performance of maintenance may void the product’s warranty.
Juiced Bikes Warranty At Juiced Bikes, we take great pride in the quality and durability of our products. We’re confident that you will be impressed as well, and we stand behind all of our products. Every bike/e-bike we sell is covered by a limited 2-year warranty against manufacturing defects subject to...
Page 21
Scope of Warranty Service In case of a warranty claim within the warranty period for a non-excluded situation JUICED agrees to: Repair or replace the failed warrantied PRODUCTS with equivalent parts/accessories/components at the discretion of JUICED, by JUICED, an authorized JUICED dealer, or by a third-party with the approval of JUICED.
Need help?
Do you have a question about the ODK U500 and is the answer not in the manual?
Questions and answers
I need 4 pin replacement charger
You can contact [email protected] to get a 2A charger for the Juiced Bikes ODK U500. Alternatively, you can search on Amazon or eBay for a Lithium battery charger with a 4-pin XLR connector and the correct voltage, ensuring it has a UL rating for safety.
This answer is automatically generated