Do you have a question about the RipCurrent S and is the answer not in the manual?
Questions and answers
karl a palen
May 17, 2025
the throttle will only propel the bike a few feet
then it shuts all the power off.
if i play around with the on/off switch a few times
the power is restored it will shut off again after
going a few feet again.
if i do not use the throttle at all it seems to work fine.
what do i do to fix it?
1 comments:
Mr. Anderson
May 23, 2025
The throttle issue on a Juiced Bikes RipCurrent S that leads to power shutting off after a few feet could be caused by one or more of the following:
1. The brake lever is too close to the throttle, causing magnetic interference due to magnets in both components. Separating them by 1/8" to 1/4" may resolve the issue.
2. The motor cutoff sensor wire may be causing the issue. Disconnecting it has resolved the problem for some users without affecting braking performance.
3. The display interface might be physically pressing against the throttle button, keeping it in the "ON" position when the bike is turned on. The system requires the throttle to be fully off at startup to initialize correctly. Adjusting the display position can fix this.
INTRODUCTION INTRODUCTION THANK YOU FOR CHOOSING TO BE PART OF THE JUICED BIKES TEAM. We invite you to read through this Owner’s Manual to learn about your e-bike and what owning an e-bike looks like. First and foremost, remember to be safe out there. Your bike is an accessory to your lifestyle and activities.
Never weave through traffic. done by an authorized Juiced Bikes dealer. Never use/ride any Juiced Bikes product in ways unintended by the manufacturer Wear shoes that will grip the pedals and stay on your feet. Be Avoid riding when: Obey all rules of the road and local traffic laws.
Page 20
• SYMPTOMS POSSIBLE CAUSES SOLUTIONS manufacturing defects. At Juiced Bikes, we take great pride in the quality and durability • Battery off • Turn on battery • Battery installation of our products. We’re confident that you will be impressed as Mechanical components are covered by a 1-year warranty •...
Page 21
• support@juicedbikes.com. Juiced Bikes will not replace any within 10 days of delivery to a Juiced Bikes’ customer support not authorized by JUICED or that have had repairs part without first seeing photos or video of the damaged International Orders, our warranty is only good in the U.S.
Page 22
/www.juicedbikes.com/pages/registration We stand behind the warranty of our products and can assure you we learn every lesson along the way, bringing it into Model Name: RipCurrent S our services. Please note each bike has its own serial number which is Service and support exist because in the real world, there are a located on the bike.
Page 23
JUICED BIKES 1669 BRANDYWINE AVE STE A CHULA VISTA, CA 91911 888-303-8889 JUICEDBIKES.COM...
Need help?
Do you have a question about the RipCurrent S and is the answer not in the manual?
Questions and answers
the throttle will only propel the bike a few feet then it shuts all the power off. if i play around with the on/off switch a few times the power is restored it will shut off again after going a few feet again. if i do not use the throttle at all it seems to work fine. what do i do to fix it?
The throttle issue on a Juiced Bikes RipCurrent S that leads to power shutting off after a few feet could be caused by one or more of the following:
1. The brake lever is too close to the throttle, causing magnetic interference due to magnets in both components. Separating them by 1/8" to 1/4" may resolve the issue.
2. The motor cutoff sensor wire may be causing the issue. Disconnecting it has resolved the problem for some users without affecting braking performance.
3. The display interface might be physically pressing against the throttle button, keeping it in the "ON" position when the bike is turned on. The system requires the throttle to be fully off at startup to initialize correctly. Adjusting the display position can fix this.
This answer is automatically generated