Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Honsel VVG RivSmart
Summary of Contents for Honsel VVG RivSmart
- Page 1 Originalbetriebsanleitung Original operating instructions Manuel d’utilisation d’origine Instrucciones originales de uso Deutsch English Français Español VIP-Service Quick-Start: www.vvg.info/rivsmart-service >> Seite 12 >> Page 39 >> Page 67 >> Página 95 CORDLESS RIVETING TOOL...
- Page 3 III.
-
Page 4: Scope Of Delivery
SAFETY PRECAUTIONS English EXPLANATION OF THE SYMBOLS / PICTOGRAMS IN THE SAFETY PRECAU- SCOPE OF DELIVERY TIONS 1. RivSmart riveter (P) This symbol draws attention to that 2. Mouthpiece box with mouthpieces fact that hazards exist for the life 3. Stud collector (E) and health of persons. -
Page 5: Electrical Safety
erate sparks that could ignite the dusts or vapours. educes the risk of injuries. Keep children and other persons away when work- ing with the electric riveter. If distracted, you may Avoid inadvertent starting of the electric riveter. En- lose control over the riveter. sure that the electric riveter is switched off before connecting it to the power supply and/or attaching the battery (F), picking it up or carrying it. -
Page 6: Technical Data
TECHNICAL DATA gerous if they are used by inexperienced persons. Service electric riveters with care. Check that RivSmart 12V moving parts function correctly and do not jam, and that parts are not broken or damaged in such Nom. blind rivet working range 2.4 - 5.0 a way that the function of the electric riveter is [Ø... - Page 7 THE OLED DISPLAY AND KEYPAD WiFi symbol SD card symbol Battery appears when appears when an SD indicates the WiFi is active card is inserted battery charge state Status lines Time Info lines Date for states, results and warnings Function symbols Arrow keys: OK key:...
-
Page 8: Function Symbols
FUNCTION SYMBOLS Sound warning ON Sound Poke-Yoke ON Sound keys ON Sound warning + Poke-Yoke ON Sound keys + Poke-Yoke ON Sound keys + warning ON Sound keys + warning + Poke-Yoke ON Automatic light 10 sec Torch light 180 sec Automatic reversing Manual reversing P/Y auto trip... - Page 9 • Attention: Ensure that the mains plug fits in your SCREW ON STUD COLLECTOR plug socket. Do not use force. • When the charger has been connected to the The stud collector (E) must be completely screwed mains power supply, the LEDs of the charger on before the riveter (P) can be put into operation.
- Page 10 WORKING WITH THE RIVSMART The RivSmart (P) is now ready for operation on the basis of the factory settings. Before you start work, however, we recommend that you familiarise yourself with the setup menu in order to adapt the riveter (P) exactly to your individual requirements.
- Page 11 HOW DO I GET THE VIP SERVICE 4. VIP service & warranty After logging in your riveter you will receive AND 36 MONTH WARRANTY? another e-mail with a link prompting you to register for the VIP service and for the warranty extension to 36 months.
-
Page 12: The Setup Menu
THE SETUP MENU The “Work Ready” screen is the working mask. In addition to the function symbols, it also shows the date and time as well as information on the select- ed functions, such as counter, DMSD Lite or job. From the “Work Ready”... - Page 13 The individual counters can be activated or deacti- vated and reset in the “Counter” screen. Various statistics can be called up in the app on the basis of the counters. Confirm your selection with the “OK key” (T) or quit the setup menu by holding the “OK key” (T) depressed (>2 s).
- Page 14 The current time and date can be set in the “Date & Time” screen. When you use the app, the RivSmart uses the time set on your smartphone / tablet. Confirm your selection with the “OK key” (T) or quit the setup menu by holding the “OK key” (T) depressed (>2 s).
-
Page 15: Warning Messages
The riveter can be calibrated under “Calibration”. Ensure that there is no rivet in the mouthpiece and no rivet stud in the clamping jaws. During calibration, the RivSmart performs a dummy stroke (riveting process without rivet) to rule out faults caused e.g. - Page 16 The warning message “Mark Rivet” prompts you to mark the rivet and then to continue riveting in order to finish the job. In this case the set rivet is not counted. Remove the faulty rivet and set it again. Acknowledge the error message by pressing the “OK key”...
- Page 17 If the DMSD Lite process monitoring system is active in addition to the job, a job error message is also displayed at each DMSD Lite error message. Depending on the settings made in the app, this job error message will be displayed after acknowl- edgement of the DMSD Lite error message.
- Page 18 The warning message “Mandrel Cup Full” indicates that the stud collector needs to be emptied. Unscrew the stud collector and empty it. The coun- ter is automatically reset to “0”. Screw on the stud collector again. The riveter is then ready for operation. Acknowl- edgement with the “OK key”...
- Page 19 The warning message “Tool Overload” indicates that the RivSmart is being overloaded. Acknowledge the error message by pressing the “OK key” (T). The reason for this can be a rivet with a shear load of over 8500 N or mechanical problems in the RivSmart.
- Page 20 The warning message “Battery Pack Temp High” indicates that the battery is being overloaded. Acknowledge the error message by pressing the “OK key” (T). The RivSmart can operate in a temperature range from -5 to 45 °C. If the battery is used at ambient temperatures outside this range or the range is exceeded due to overload, the riveter switches off.
-
Page 21: Maintenance And Service
MAINTENANCE AND SERVICE What? Who? When? Visual inspec- Operator Daily tion of the SERVICING AND CHANGING THE CLAMP- riveter ING JAWS Battery Operator Daily charge state Depending on the mandrel material, shear force and surface finish, the clamping jaws have to be Calibration Operator Daily, when... -
Page 22: Battery Disposal
ing indicates that the battery (F) is worn out and time and date are not set correctly, they will not has to be replaced. appear correctly on the display and the date and Observe the instructions on disposal. time stamp will not be saved correctly on the SD card (R). - Page 23 Never operate the riveter with stud MANUAL / AUTOMATIC RETURN securing cap (J) and retainer mouthpiece (A) at the same time. The rivet studs Pressing the trigger (I) activates the riveter. In could then not be discharged to either the manual return mode, the riveter (P) is activated as front or the rear.
- Page 24 DMSD LITE / DMSD HR As standard the riveter (P) has a force/stroke mon- itoring system (DMSD Lite) and is therefore able to document the riveting operations performed. For this the SD card (R) must be in the riveter. Attention: The SD card (R) must not be inserted into or removed from the riveter as long as the bat- tery (F) is installed.
- Page 25 RIVSMART CONTROL-CENTER The “RivSmart Control Center” can be reached via the VVG homepage. www.vvg.info/rivsmart-service Login: Use the login data of the RivSmart app to login to the Control Center. Riveter overview: After logging in, the user receives a direct overview of the riveters linked to the account (e-mail). At this point you get a direct overview of the riveters with S/N code (serial number), MAC address (mobile device identity), active time (activation time), active address (place for theft protection), unbind option (separate the riveter from the account), share option (enable riveter for other accounts) and share list (overview of...
- Page 26 Enable riveter: A click on the button “Share” in the line of the riveter to be enabled opens a box in which an e-mail ad- dress can be entered. This e-mail address corresponds to the account (sub-user /share user) for whom the riveter is to be ena- bled.
- Page 27 To complete this step, click “Confirm” to confirm or “Cancel” to leave the enable active. Forgotten password: If you forget the password (access data for the app), you can enter the registered e-mail address of the app and click “Help, I forgot my password”. Resetting of the password is thus initiated.
- Page 28 This procedure ensures that only persons with access to the e-mail account can reset the password. The e-mail received contains a link marked “here”. Click on this link to confirm that you wish to reset the password and you will be forwarded to the next step. If you have not requested the “Reset password”...
- Page 29 EG-KONFORMITÄTSERKLÄRUNG EG-RL EG-KONFORMITÄTSERKLÄRUNG EG-RL 2006/42/EG ANHANG II 1A 2006/42/EG ANHANG II 1A The manufacturer: The manufacturer: VVG-Befestigungstechnik GmbH & Co VVG-Befestigungstechnik GmbH & Co Friedrich-Wöhler-Str. 44 Friedrich-Wöhler-Str. 44 24536 Neumünster 24536 Neumünster Germany Germany Tel.: +49(0)4321-967171 Tel.: +49(0)4321-967171 declares hereby that the following product: declares hereby that the following product: Product designation: Product designation:...
- Page 31 VVG Befestigungstechnik GmbH & Co fon + 49 (0) 4321 9671 71 www.vvg.info Friedrich-Wöhler-Str.44 fax + 49 (0) 4321 9671 96 www.vvg.fr 24536 Neumünster mail info@vvg.info GERMANY...
Need help?
Do you have a question about the VVG RivSmart and is the answer not in the manual?
Questions and answers