Spycentre Security 9318 Instruction Manual

SpyCentre Security® Since 1993
9318-WIFI Air Purifier Security Camera: Tuya Smart Android/iPhone Application
Connecting to WIFI:
● Insert an SD card into the memory card slot located on the back of the device under the
cover
● Plug in the power cable and turn on the camera
● While you wait for the device to boot up, download the "Tuya Smart" application from the
Apple or Google Play store
● Open the "Tuya Smart" application
● Make sure to allow all pop up's for the application; otherwise, results may vary
● Add a new camera by tapping the (+) button located on the top right and selecting "Add
Device"
● If Bluetooth is not enabled, the app will request that it be turned on during the setup
● Select "Smart Camera (Wi-Fi)" under the security camera section
● In the application, follow the steps, and once you get to the "Select a WIFI network and
Enter the Password," Make sure you are selecting a WIFI that is not 5.2GHz only
● The application will generate a QR based on the WIFI and password information so that
the lens of the camera can configure
● Hold the QR code about a foot away so that the camera can read it
● Once the camera has made a prompt sound, press the "I Heard The Prompt Button" so
the camera can complete the connection.
Note: If the setup process has been completed, and you cannot connect to the camera,
hold the "Reset" button next to the SD card slot for about 10 seconds and then repeat the
process above after the camera has rebooted.
1-800-292-7748