Page 1
SpyCentre Security® Since 1993 1-800-292-7748 6818 - 2K Ultra Power Bank Security Camera How to charge the battery: ● Connect the recorder to a PC or USB power supply with the provided Micro USB to USB cable ● It takes up to 8 hours to charge fully ●...
Page 2
How to record a continuous video: ● Video Tutorial: https://www.youtube.com/shorts/8CYm8L72dqQ ● Select recording mode by sliding the mode key to V (Continuous recording) ● Slide the on/off key to the on; the camera will start recording. ● The red light will blink three times and turn off, indicating it has started. At the same time, the orange lights will stay illuminated for 10 seconds and then disappear.
Page 3
How to playback files on a Windows computer: There are two options for reviewing information from the memory card, depending on whether your computer is capable of recognizing the device. ● Option 1: Remove the Memory Card from the device and insert it into a computer using an SD card reader or SD port ●...
Page 4
How to playback files on a Mac: There are two options for reviewing information from the memory card, depending on whether your computer is capable of recognizing the device. ● Option 1: Remove the Memory Card from the device and insert it into a computer using an SD card reader or SD port ●...
Page 5
How to playback files on a Google Chromebook: There are two options for reviewing information from the memory card, depending on whether your computer is capable of recognizing the device. ● Option 1: Remove the Memory Card from the device and insert it into a computer using an SD card reader or SD port ●...
Page 6
VLC Media Player (Recommended for optimal usage) How to download VLC Media Player on a Mac computer ● Go to www.videolan.org and click the “Download VLC” ● It will open a new window and begin downloading ● If it does not automatically start downloading, press the “Click Here” and select one of the mirrored sites ●...
Page 7
Note: If the memory folder of the recorder does not automatically open when connected to a PC, disconnect the device and perform the following. 1. Type “Control Panel” in the search bar and select “Programs” 2. Under “Default Programs,” click “Change Default Settings for Media or Devices” 3.
Need help?
Do you have a question about the 6818 and is the answer not in the manual?
Questions and answers