Hudson 19004 Instructions

THANK YOU!! We appreciate the trust and con dence you have placed in Hudson through the purchase of this sprayer. We strive to continually create quality products designed to
enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Hudson!
SAFETY INFORMATION
WARNING: This product is designed to spray chemicals that
may be harmful and could cause serious personal injury if
inhaled or brought in contact with the user. Failure to read
and follow these instructions before use and/or misuse of
this product could result in explosive failure with major
injuries.
WARNING: Always wear long sleeve shirts, long pants, WARNING: Always wear long sleeve shirts, long pants,
googles, gloves and durable shoes when using this product. googles, gloves and durable shoes when using this product.
ASSEMBLY
1
Remove all sprayer
parts from the box.
• Tank with hose & shuto
• Pump handle
• Wand
OPERATION
1
Filling the sprayer
• Unscrew and remove the lid of the sprayer.
• Prepare the spray solution following the instructions listed
on the chemical manufacturer's label.
• Pour spray solution into the tank through the lter so that
no debris gets into the sprayer.
• Screw lid back onto the unit and hand tighten.
(If lid is not tightened securely, liquid may leak from the lid)
MAINTENANCE AND STORAGE
• After use, the sprayer should be properly cleaned and stored away from direct sunlight to prevent UV damage.
• Before storing for the winter, be sure that most of the liquid is completely drained from the tank, lines and air chamber.
• Leave the shuto locked on.
• Regularly inspect the hose, wand, pump, tank and shuto for wear, damage or leaks.
• Avoid excessive wear by regular lubrication and a prompt and thorough cleaning after each use.
For replacement parts/troubleshooting call: 1-800-977-7293
or email us at ladybug@hdhudson.com
Instructions for Heavy-Duty Backpack Sprayer 19004
Customer service is here to help! If you have any questions or concerns, do not return sprayer to the store.
For replacement parts/troubleshooting call: 1-800-977-7293
WARNING: Do not store liquids in the sprayer
WARNING: Always read and follow the label
instructions for the chemicals to be applied.
WARNING: Always test the sprayer before each
use.
WARNING: After each use, release the pressure
and clean the sprayer.
2
Insert wand into shuto and
tighten down.
2
Pressurizing the sprayer
• To operate the pump, make sure the pump
handle is horizontal to the ground and
perpendicular to the unit.
• Create pressure by moving the pump handle
up and down.
or email us at ladybug@hdhudson.com
WARNING: Never ll above the maximum line on the tank.
WARNING: Do not alter the sprayer or any components.
WARNING: Always release the pressure in the sprayer before servicing.
WARNING: Do not spray ammable, caustic(i.e. acids, chlorines and bleach),
corrosive, heated or self-heating solutions with this sprayer.
19004
Instructions
3
Place the pump handle on the
lever shaft located at the
bottom of the tank and push
on.
For use, pump handle should
For storage, pump handle
be horizontal to the ground and should be in an upright
perpendicular to the unit. position.
3
Operating the sprayer
• To start spraying, squeeze the lever on the ow
control.
• To stop spraying, release the lever on the ow
control.
• To spray continuously, squeeze the lever on the
ow control and slide forward to lock in place.
Slide trigger back down to shut ow control o .
• Screw the nozzle clockwise for a ne mist and
counterclockwise for a straight stream.
©2021 Manufactured by H. D. Hudson
Manufacturing Company