Pioneer Premier DEH-P700BT Installation Manual page 2

Connecting the unit English
When not connecting a rear speaker lead to a subwoofer
20 cm Microphone input
(7-7/8 in.)
1.5 m (4 ft. 9 in.)
15 cm
50 cm (20 in.) USB cable (5-7/8 in.)
Connect to separately sold USB device.
This product
Rear output
iPod
Front output
Wired remote input
Hard-wired remote control
Antenna jack
adaptor can be connected
Subwoofer output (sold separately).
IP-BUS input (Blue)
Dock connector
Interface cable
Fuse (10 A) IP-BUS cable
Yellow
Connect to the constant 12 V supply terminal.
Fuse resister
Yellow/black
If you use an equipment with Mute function,
Red
wire this lead to the Audio Mute lead on that
Connect to terminal controlled by
equipment. If not, keep the Audio Mute lead
ignition switch (12 V DC).
free of any connections.
Black (chassis ground)
Connect to a clean, paint-free metal location.
With a 2 speaker system, do not
connect anything to the speaker leads
that are not connected to speakers.
White Gray

Front speaker

White/black Gray/black
Left
Green Violet

Rear speaker

Green/black Violet/black
When connecting speakers without using the internal
amplifier, we recommend that this unit's internal amp is
turned off. For more details, refer to operation manual.
Connecting the unit
4 m (13 ft. 1 in.)
Microphone
AUX jack (3.5 φ)
Use a stereo mini plug
cable to connect with To rear output
Connect with RCA cables
auxiliary device.
(sold separately)
To front output
To subwoofer
output
Multi-CD player
(sold separately)
System remote control
Blue/white
Connect to system control terminal of the power
amp or auto-antenna relay control terminal (max.
300 mA 12 V DC).
Perform these connections
when using the optional
amplifier.

Front speaker 
 Subwoofer

Right


Rear speaker
Front speaker



Rear speaker

English Connecting the unit
When using a subwoofer without using the optional amplifier
Power amp
50 cm (20 in.)
(sold separately)
iPod
Power amp
(sold separately)
Power amp
(sold separately)
Interface cable
Yellow/black
If you use an equipment with Mute function, wire this lead to the Audio
Mute lead on that equipment. If not, keep the Audio Mute lead free of
any connections.
Yellow
Connect to the constant 12 V supply terminal.
Red

Subwoofer Connect to terminal controlled by ignition switch (12 V DC).

Black (chassis ground)

Front speaker Connect to a clean, paint-free metal location.

Note:

Change the initial setting of this unit.
Rear speaker
The subwoofer output of this unit is monaural.

English Connecting the unit
20 cm Microphone input
(7-7/8 in.)
1.5 m (4 ft. 9 in.)
15 cm
USB cable (5-7/8 in.)
AUX jack (3.5 φ)
Connect to separately sold USB device.
Use a stereo mini plug
This product
Rear output
cable to connect with
auxiliary device.
Front output
Wired remote input
Hard-wired remote control
Antenna jack
adaptor can be connected
(sold separately).
Subwoofer output
IP-BUS input (Blue)
Dock connector
Multi-CD player
IP-BUS cable (sold separately)
Front speaker
Fuse (10 A)
Left
Subwoofer (4 Ω)
Fuse resister
English
4 m (13 ft. 1 in.)
Microphone
Blue/white
Connect to system control
terminal of the power amp or
auto-antenna relay control
terminal (max. 300 mA 12 V DC).
White Gray
 
Front speaker
 
White/black Gray/black
Right
Green Violet
 
Subwoofer (4 Ω)
 
Green/black Violet/black
When using a subwoofer of 70 W (2 Ω), be sure to connect
with Violet and Violet/black leads of this unit.
Do not connect anything with Green and Green/black leads.

Green Violet
Subwoofer
Not used.
(4 Ω)  2
Green/black Violet/black 