Bluetooth Setup; Registering Phone Book Name Type - Kenwood KDC-X395 Instruction Manual

■
To select "PB NAME CHK", play the
registered voice.
■
To select "PB NAME DEL", delete a voice
tag. Turn the volume knob to select "YES",
then press to confirm.
7 "ENTER 1" is displayed. When a beep is
heard, say a voice tag within 2 seconds.
"ENTER 2" is displayed. When a beep is
8
heard, say the same voice tag as that you
said in step 7 within 2 seconds.
"COMPLETE" is displayed.
Press the volume knob to return to step 5.
9
■
To exit Setting mode, press
■
To exit Bluetooth mode, press
■
You can register up to 35 voice tags.
■
Audio sound is not output during voice tag
registration.

Registering Phone Book Name Type

/
1
KDC-BT648U KDC-X695
Press to enter Bluetooth mode.
/
KDC-X395 KDC-348U
Press and hold the volume knob to enter
Bluetooth mode.
Turn the volume knob to select
2
[SETTINGS], then press to enter.
Turn the volume knob to select [VOICE
3
TAG], then press to enter.
Turn the volume knob to select [PN TYPE
4
EDIT], then press to enter.
Turn the volume knob to select
5
[GENERAL], [HOME], [OFFICE], [MOBILE],
or [OTHER], then press to enter.
6 Turn the volume knob to select [PN TYPE
REG], then press to enter.
Item
PAIRING
DEVICE SEARCH Registers a Bluetooth device (pairing).
(For details, see page 19.)
PHONE SELECT Selects a cell-phone connection.
(For details, see page 20.)
AUDIO SELECT KDC-X395/ KDC-348U only:
Selects a Bluetooth audio player connection. (For details, see page 20.)
S-DVC SELECT (For details, see page 19.)
7
8
.
SRC.
9
■
Set the voice tag for all the 5 categories. If
the voice tag is not registered for all the
categories, the Phone book may not be
recalled by voice command.

Bluetooth Setup

1
2
3
4
■
To exit Bluetooth mode, press
Selectable setting (Preset: *)
■
To select "PN TYPE CHK", play the
registered voice. (KDC-X395/ KDC-348U
only)
■
To select "PN TYPE DEL", delete a voice
tag. Turn the volume knob to select
"YES", then press to confirm. (KDC-X395/
KDC-348U only)
"ENTER 1" is displayed. When a beep is
heard, say a voice tag within 2 seconds.
"ENTER 2" is displayed. When a beep is
heard, say the same voice tag as that you
said in step 7 within 2 seconds.
"COMPLETE" is displayed.
Press the volume knob to return to step
5.
/
KDC-BT648U KDC-X695
Press to enter Bluetooth mode.
/
KDC-X395 KDC-348U
Press and hold the volume knob to enter
Bluetooth mode.
Turn the volume knob to select
[SETTINGS], then press to enter.
Turn the volume knob to make a
selection, then press to confirm.
■
See table below for selection.
■
Repeat step 3 until the desired item is
selected/activated.
■
Press to return to the previous item.
Hold to finish the procedure.
SRC.
Continued to next page
21
English