Kohler K-15198 Installation Manual
  1. Manuals
  2. Brands
  3. Kohler Manuals
  4. Plumbing Product
  5. K-15198
  6. Installation manual
Kohler K-15198 Installation Manual

Kohler K-15198 Installation Manual

Centerset lavatory faucet
Hide thumbs Also See for K-15198:
1
2
3
4
5
6
7
8

Advertisement

Table of Contents

Installation Guide
Centerset Lavatory Faucet
K-P15182, K-P15186, K-P15199,
M product numbers are for Mexico (i.e. K-12345M)
Los números de productos seguidos de
M corresponden a México (Ej.
K-12345M)
Français, page "Français-1"
Español, página" Español-1"
1010442-2-D
K-15182, K-15186, K-15198,
K-15199, K-15582, K-15583,
K-15592, K-15593, K-15597,
K-15598, K-15681, K-15686,
K-P15681, K-P15686

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the K-15198 and is the answer not in the manual?

Questions and answers

Related Manuals for Kohler K-15198

Summary of Contents for Kohler K-15198

  • Page 1 Installation Guide Centerset Lavatory Faucet K-15182, K-15186, K-15198, K-15199, K-15582, K-15583, K-15592, K-15593, K-15597, K-15598, K-15681, K-15686, K-P15182, K-P15186, K-P15199, K-P15681, K-P15686 M product numbers are for Mexico (i.e. K-12345M) Los números de productos seguidos de M corresponden a México (Ej.

  • Page 2: Tools And Materials

    For new installations, install the faucet and drain to the lavatory before installing the lavatory. Kohler Co. reserves the right to make revisions in the design of faucets without notice, as specified in the Price Book. 1010442-2-D Kohler Co.

  • Page 3: Faucet Installation

    Insert the faucet into the lavatory holes. Check alignment. Slide a channel and spacer onto each shank. Thread a nut onto each shank and loosely tighten. Position the faucet as desired. Secure the faucet by securely wrench tightening the nuts. Wipe away any excess sealant. Kohler Co. 1010442-2-D...
  • Page 4 From the top of the fixture, securely hand tighten the flange onto the drain body. Make sure the drain body seal hole is facing the back of the fixture, and securely tighten the nut. Remove any excess putty or sealant. 1010442-2-D Kohler Co.
  • Page 5 Insert the lift rod into the hole in the body and then into the hole in the link. Tighten the thumbscrew onto the link so the lift rod knob extends 1/2″ (1.3 cm) above the lift rod hole. Check for leaks. Kohler Co. 1010442-2-D...
  • Page 6 Thread the nut up the drain body until snug against the underside of the lavatory. Use care not to rotate the drain while tightening the nut. Using a wrench, tighten the nut. Remove any excess putty or sealant. Connect the P-trap to the drain body. 1010442-2-D Kohler Co.

  • Page 7: Supply Connections

    Open both hot and cold valves and run water through the spout for about a minute to remove debris. Check for leaks. Close the hot and cold valves. Rinse any debris from the aerator and reinstall. Kohler Co. 1010442-2-D...
  • Page 8 Turn the indexer, top disc, and valve stem counterclockwise until you achieve the desired temperature. Reinstall the indexer and top disc to the valve. Make sure the top disc is snapped fully into the indexer. Turn off the water, and reinstall the bonnet and handle. 1010442-2-D Kohler Co.

This manual is also suitable for:

K-15186K-15182K-15199K-15582K-15583K-15592 ... Show all

Table of Contents