On-Screen Display (Osd) - Yamaha DVD-C950 Owner's Manual

Disc Operation

On-Screen Display (OSD)

The OSD menu shows disc playback
information (e.g., the title or chapter
number, elapsed playing time or audio/
subtitle language). A number of operations
are possible without interrupting disc
playback.
1 During playback, press ON SCREEN.
A list of available disc information
appears on the TV screen.
DVD
MENU
TITLE
CHAPTER
AUDIO
SUBTITLE
BITRATE 16
VCD/SVCD
MENU
TRACK
DISC TIME
TRACK TIME
REPEAT
BITRATE 16
2 Press 34 to view the information and
press ENTER/OK to access the selected
item.
3 Use the numeric keypad (0-9) to input
the number/time or press
selection, then press ENTER/OK to
confirm.
Playback will change to the chosen time
or to the selected title/chapter/track.
Title/Chapter/Track selection (DVD/
VCD)
1 Press 34 to select [TITLE] or
[CHAPTER] (DVD) or [TRACK] (VCD).
2 Press ENTER/OK.
3 Select a title, chapter or track number
using the numeric keypad (0-9).
TIP: The operating features described here might not be possible for certain discs. Always refer to
the instructions supplied with the disc.
18
02/14
02/14
5.1CH
ENG
TITLE ELAPSED 0:02:25
02/14
0:49:17
0:03:43
OFF
TOTAL ELAPSED 0:02:25
to make the
34
Time Search (DVD/VCD)
1 Press 34 to select [TT TIME] or [CH
TIME] (DVD) or [TRACK TIME] or [DISC
TIME] (VCD).
[TT TIME] refers to the total time of the
current title, and the [CH TIME] refers
to the total time of the current chapter.
2 Press ENTER/OK.
3 Enter hours, minutes and seconds from left
to right using the numeric keypad (0-9)
(e.g. 0:34:27).
Audio/Subtitle/Angle (DVD discs)
You can change [AUDIO], [SUBTITLE] or
[ANGLE] if these functions are available on
the disc you are playing.
1 Press 34 to select [AUDIO], [SUBTITLE]
or [ANGLE].
2 Press ENTER/OK.
3 For Audio and Subtitle,
Press 34 to highlight your selection and
press ENTER/OK.
For Angle:
Select an angle using the numeric
keypad (0-9).
Repeat/Time Display (DVD/VCD)
1 Press 34 to select [REPEAT] or [TIME
DISP.].
2 Press ENTER/OK.
3 Press 34 to highlight your selection and
press ENTER/OK.
OR