Altinex UT Series User Manual

Under the Table Interconnect Solutions Under the Table Interconnect Solutions
Under the Table Interconnect Solutions Under the Table Interconnect Solutions
Welcome!
We greatly appreciate your purchase of a UT Series. We are sure you will find
it reliable and simple to use. Superior performance for the right price, backed
by solid technical and customer support is what ALTINEX has to offer.
We are committed to providing our customers with
Signal Management Solutions ® to the most demanding audiovisual
installations at very competitive pricing and we welcome you to join the ranks
of our many satisfied customers throughout the world.
1. Precautions and Safety Warnings
Please read this manual carefully before using your UT-Series Interconnect.
Keep this manual handy for future reference. These safety instructions are to
ensure the long life of your UT-Series Interconnect and to prevent fire and
shock hazards. Please read them carefully and heed all warnings.
1.1 General
•
There are no user serviceable parts inside. Qualified ALTINEX service
personnel must perform all service on the UT-Series.
1.2 Handling
•
To prevent fire or shock, do not expose this unit to water or moisture.
Do not place the UT-Series in direct sunlight, near heaters, or
heat-radiating appliances, or near any liquid. Exposure to direct sunlight,
smoke, or steam can harm internal components.
•
Handle the unit carefully. Dropping or jarring can cause damage.
•
Do not pull any cables that are attached to the UT-Series.
•
Do not place heavy objects on top of the UT-Series.
2. Installation Procedures
The UT Series can be installed horizontally or vertically as shown. Typically, units are installed under a table-top, but in
some cases, it may be desirable to install a unit inside a desk opening, or on the back of a desk or podium.
Step 1. Locate the best position for the UT Interconnect, but do NOT mount it to the surface until all the cables are
prepared.
Step 2. Prepare the mating cables using high-quality cables for best results and durability. Make sure the cables are long
enough to allow for a service-loop and so the cables can be neatly routed beneath the table to their destinations.
Step 3. Prepare the network cables using the CAT-6 (RJ-45) connectors provided with the unit.* The connectors are
high-quality snap-in connectors and do not require any tools for installing them into the UT interconnect.
Step 4. Secure the unit under the table using the metal screws provided with the unit.
Step 5. Make any necessary connections to the snap-in connectors.
Step 6. Use cable-ties to secure the cables to the mounting shelf. Insert the ties through the holes on the bottom of the
unit.
Step 7. Use the cable clamps provided to secure the cables to the bottom of the table/desk.
* Please visit our website: www.altinex.com
3. Limited Warranty/Return policies
Please see the ALTINEX website at
400-0491-004
Note: Connectors are provided but do not include cables. ALTINEX
recommends a telecommunications contractor wire the network
connectors and verify operation before installing the UT
interconnect.
for information related to the pin out of the cables.
www.altinex.com for details on warranty and return policies.
1.3 Cleaning
•
Unplug the UT-Series before cleaning.
•
Clean only with a dry cloth. Never use strong detergents or solvents such
as alcohol or thinner. Do not use a wet cloth or water to clean the unit.
Do not open the unit to clean.
1.4 FCC Notice
•
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
•
This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and if not installed and used in accordance with
instructions found herein, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
•
Any changes or modifications to the unit not expressly approved by
ALTINEX, Inc. could void the user's authority to operate the equipment.
1
User's Guide
Installation Options
Table Top (Side View)
Inside Desk (Side View)
Back of Desk/Podium (Top View)
Desk Surface