Playback; Basic Operation; Before Starting Play; Playing A Disc - Yamaha DV-C6480 - Progressive-Scan DVD Player Owner's Manual

PLAYBACK

Before starting play

To play a disc properly, you need to adjust the formats of audio and video signals output from this unit in accordance with the
equipment connected to this unit. See p.25 to 27.
CAUTION
• If your AV amplifier does not incorporate DTS decoder and you have connected this unit and the amplifier through
digital terminals, please make sure that the 'DTS Digital Surround' at 'Audio' SETUP MENU is set to PCM (factory-
setting). Otherwise, unprocessed digital signals will be output and its noise could damage your ears and your speakers.

Playing a disc

1
POWER
3
Label side
upward
Disc tray
PLAY MODE REPEAT
SUBTITLE
TOP MENU
ON SCREEN
STOP
SKIP
1
5
9
VIDEO OFF GROUP
PROGRESSIVE
DISC1
SET UP
DISC4

BASIC OPERATION

2
GROUP VIDEO OFF PROGRESSIVE ON PLAYXCHANGE
PROGRESSIVE
DISC SKIP
VIDEO OFF
4
(PLAY)
OPEN/CLOSE
2
A – B MARKER
AUDIO ANGLE
MENU
ENTER
4
(PLAY)
RETURN
PLAY PAUSE
SLOW/SEARCH
2 3 4
6 7 8
CANCEL
0 10
PAGE
DISC2 DISC3
DISC SKIP
DISC5
I Preparation
Select DVD as the input source on your AV amplifier.
Press POWER to turn the power on.
1
2 Press v (or OPEN/CLOSE) to open the disc
tray.
3 Load discs.
Use the disc guides (numbered, 1 to 5) to align the
discs correctly.
4 Press w (PLAY).
The disc tray closes and playback starts. This unit plays
all discs on the tray in sequence.
y
• If necessary, select a desired disc using DISC SKIP or one of the
DISC 1, 2, 3, 4 or 5 buttons.
• When a menu screen appears
See 'Using a Disc's Menu' in p.14.
Notes
• When this unit finishes playing a DVD, this unit stops playback or
shows the menu screen and does not start playing the next disc.
• This unit cannot play a CD-R or CD-RW disc unless the disc has
been finalized. Please make sure to finalize the disc on the CD
recorder before playing it on this unit.
DVD-A DVD-V VCD
:
11