XBOX 9Z5-00013 - 360 HD DVD Player User Manual page 2

SetUpYoUrHDDVDplaYer
Before you can use your HD DVD player, you
must:
1 Make sure your Xbox 360 console has the
HD DVD player software installed.
 Position your player.
 Connect your player to power.
4 Connect your player to your Xbox 360
console.
5 Configure your console's display settings
for high-definition viewing (if applicable).
InstalltheHDDVDplayerSoftware
Before using the HD DVD player, turn on your
console, load the supplied software disc, and
follow the on-screen instructions.
positionYourplayer
Like your Xbox 360 console, the Xbox 360
HD DVD Player may be positioned to sit
horizontally or stand vertically. Unlike your
console, however, the HD DVD player has
rubber feet only on its horizontal base, making
it less prone to sliding or moving when it's
sitting flat.
IMPORTANT
Do not position the player in a location that
obstructs either its fan or its cooling vents.

NOTe
Never change the orientation of your player
while a disc is loaded or while the player
is on.
Connecttopower
Connect the HD DVD player to power using
the provided power cord and AC power
supply.
To connect, completely insert the power
supply cord into the back of the HD DVD
player until it stops. Connect the AC power
cord into the power supply until it stops, then
connect the power cord to a standard wall
socket.
The HD DVD player includes one of the
following power supplies:
• Adapter, P/N STD-1225M
• Phihong, P/N PSC24W-120