Subscribe to Our Youtube Channel
Related Manuals for CATU MT-300
Summary of Contents for CATU MT-300
- Page 1 MT-300 EARTHING RAIL EQUIPMENT FOR THIRD RAIL CONFIGURATION OPERATION AND MAINTENANCE MANUAL CATU S.A. 10 à 20 Avenue Jean-Jaurès 92220 BAGNEUX CEDEX Tél. 01 42 31 46 00 Télécopie 01 42 31 46 32...
- Page 2 BEFORE EACH USE, IT IS CRUCIAL TO CHECK nel or return for repair to CATU. THE ABSENCE OF VOLTAGE* After unpacking and checking, it is recommended to store the equipment on clean, dry and folded condition.
- Page 3 Operating Instructions On both cases operation of exchange has to be carried out only by spe- cially trained personnel. 1. The operator should position between the running rails and install the Wearing parts have to be dismounted and remounted in accordance with contact block on the nearest rail of the current rail the original position.
- Page 4 2- Maintenance of wearing parts 3. Turn the knob in order to firmly fix the earthing system They are two major wearing parts: 1- Set of two Contact pieces in brass with their screws (ref M 62-656). M8 screws Contact parts 4.
- Page 5 Characteristics Ø Foldable handle according 60855 standards, 32 mm dia. foam filled tube. Approx: lenght: 600 mm. Ø Adjustable frame in 45 mm insulated polyester glass fibre tube. Ø Extra flexible braided multi-strand copper cables 95 mm² - with transparent silicon sheath resistant to temperature variations (-40°C to +70°C) according to IEC 61138 standards.
-
Page 6: Routine Maintenance
Maintenance There are two types of Maintenance: Routine Maintenance & Maintenance of wearing parts. 1- Routine maintenance According to IEC 61230 standard (portable equipment for earthing or earthing and short-circuiting) on an informative annex C: 1.1 Verification before use For safety reasons, earthing and short-circuiting equipment should be handled with great care.
Need help?
Do you have a question about the MT-300 and is the answer not in the manual?
Questions and answers