Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for 70mai Midrive UP03
Summary of Contents for 70mai Midrive UP03
- Page 1 Hardware Kit UP03 User Manual...
- Page 2 Dear customer, Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.
-
Page 3: Product Overview
Functions As an accessory to 70mai in-car devices, this product must be used with the main device. After correctly installed and connected with the main device, 70mai Hardware Kit will power and transmit ACC signals to the main device and provide low-voltage protection to prevent over-discharging of the car battery due to the continuous operation of the main device. -
Page 4: Supported Devices
Supported Devices This product is compatible with parking surveillance-supported Xiaomi and Mijia in-car devices manufactured by 70mai. This product has a USB Type-C port and does not support main devices that uses a USB-A connector. Important note: For smart rear-view mirrors and other smart in-car products, change the power on/off mode to “ACC detection mode”... - Page 5 Before installation and wiring, please turn off the car engine and power to • prevent short circuit. Step 3: Testing the connection and ACC signal Smart rear-view mirrors and other smart in-car devices Please follow the steps below to test the connection and ACC signal: Connect the USB port of the hardware kit to the power outlet of the main device •...
- Page 6 Dash cams Please follow the steps below to test the connection and ACC signal: Connect the USB port of the hardware kit to the power outlet of the main device • (DC/IN). Start the engine and wait for the main device to turn on. If the main device fails to power on, press and hold the power button to manually turn it on.
-
Page 7: Specifications
Some cars cannot detect changes in ACC signals when the engine is turned on or • off. For such cars, the 70mai hardware kit is unable to transmit ACC signals to the main device. This may cause certain functions to be unavailable. -
Page 8: Warranty Conditions
Warranty Conditions A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase. The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized: Using the product for any purpose other than that for which the product is intended... -
Page 9: Eu Declaration Of Conformity
EU Declaration of Conformity Identification data of the manufacturer's / importer's authorized representative: Importer: Alza.cz a.s. Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7 CIN: 27082440 Subject of the declaration: Title: Hardware kit Model / Type: UP03 The above product has been tested in accordance with the standard(s) used to demonstrate compliance with the essential requirements laid down in the Directive(s): Directive No. - Page 10 WEEE This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE - 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste.
Need help?
Do you have a question about the Midrive UP03 and is the answer not in the manual?
Questions and answers