Active Subwoofer Wireless Connection; Bluetooth ® Connection - Panasonic SCHTB350 Owner's Manual

Active subwoofer wireless
connection
Preparation
≥ Turn on the main unit.
Press [BÍ CI].
Check that the wireless link is
activated.
WIRELESS LINK indicator lights
≥ Red:
The wireless link is not activated.
≥ Green:
The wireless link is activated.
The unit will still consume a small amount of power
even when it is turned off (B, Í)
Bluetooth
®
With the Bluetooth connection you can output the
®
audio from the connected wireless device.
Preparation
≥ Turn on the Bluetooth
place the device near this unit.
Pairing a device
[ , j PAIRING]
Press
" "
indicator will blink quickly.
≥
Select "SC-HTB350/351" from the
Bluetooth device's Bluetooth
®
menu.
≥ Once the Bluetooth
®
indicator stops flashing and lights up.
Refer to the operating instructions of the Bluetooth
further instruction on how to connect a Bluetooth
If prompted for the passkey on the Bluetooth
"0000".
Pairing additional devices
[ , j PAIRING]
Press
Press and hold the [
until the " " indicator flashes
quickly.
Repeat step 2 of "Pairing a device".
≥ You can register up to 6 devices with this unit. If a 7th device
is paired, the device that has not been used for the longest
time will be replaced.
≥ This unit can only be connected to one device at a time.
≥ To change the sound quality, refer to "Bluetooth
communication mode" on page 24.
connection
feature of the device and
®
.
®
device is connected, the "
device for
®
device.
®
device, enter
®
.
, j PAIRING
®
RQT9670
"
]
21