Advertisement
Quick Links
Instruction Manual
Model:
PDHX2-M2-EU
CORDLESS HAMMER DRILL/
DRIVER
• SAFETY
• ASSEMBLY
• OPERATION
CAUTION: Before using this tool, please read this manual completely,
• MAINTENANCE
and follow all operating safety measures.
Senix Australia Pty Ltd. 32/3 Westside Avenue, #Port Melbourne, Victoria, 3207
For customer support, please call 1300 461 825 or email us at info@senixtool.com
v. 1.1
English
SENIX.COM.AU
Advertisement
Related Manuals for Senix PDHX2-M2-EU
Summary of Contents for Senix PDHX2-M2-EU
- Page 1 CAUTION: Before using this tool, please read this manual completely, • MAINTENANCE and follow all operating safety measures. Senix Australia Pty Ltd. 32/3 Westside Avenue, #Port Melbourne, Victoria, 3207 For customer support, please call 1300 461 825 or email us at info@senixtool.com v. 1.1 English SENIX.COM.AU...
- Page 2 Do not dispose of battery packs in rivers or immerse in water. Do not dispose of battery packs in fire. They will explode and cause injury. Use the battery in a maximum tem- perature of 50°C (122°F). Max 122°F EN - 2 SENIX.COM.AU...
- Page 3 Use of a cord suitable for 4) Power tool use and care outdoor use reduces the risk of electric Do not force the power tool. Use the 3 - EN SENIX.COM.AU...
- Page 4 "live" and could give the operator an Use power tools only with specifically electric shock. designated battery packs. Use of any Safety Instructions When Using Long other battery packs may create a risk of Drill Bits injury and fire. EN - 4 SENIX.COM.AU...
- Page 5 Shorting the battery terminals together becomes overloaded. may cause burns or a fire. Use suitable detectors to determine if • Under abusive conditions, liquid may be there are hidden supply lines or contact the 5 - EN SENIX.COM.AU...
- Page 6 Keep tight grip on the handles/grip surface. • Maintain this product in accordance with these instructions and keep it well lubricat- ed (where appropriate). • Plan your work schedule to spread any high vibration tool use across a longer period of time. EN - 6 SENIX.COM.AU...
- Page 7 KNOW YOUR UNIT APPLICATIONS Model: PDHX2-M2-EU As a cordless hammer drill/driver: Drilling in wood, metal products and masonry with drill bits; Driving screws into wood, metal and drywall with screwdriver bits. Speed Selector Variable Speed Trigger Function Selector Work Light...
- Page 8 Always use special the country and purchased variant: bits according to the work to be performed. Model of PDHX2-M2-EU The chuck and the bit can be very hot after • Hammer drill x1 working, do not assemble/disassemble them •...
- Page 9 Prior to installation, lock the switch trigger by moving the direction selector to the center lock position to avoid unintentional start. Forward Reverse To install: Align and slide the battery pack to the battery foot until it is locked in place. Fig. 5 9 - EN SENIX.COM.AU...
- Page 10 Mode Setting Application selector is set to the "2" setting. Driving screws, Driving bolts. Drilling in wood Drilling and metal. Impact Drilling in Drilling masonry. TORQUE Fig. 8 Select a suitable torque value from 1-19 when EN - 10 SENIX.COM.AU...
- Page 11 If this does not work, switch to reverse mode, run the tool at a slow speed and perpendicularly draw out with slight force. Check the power tool and its clamping 11 - EN SENIX.COM.AU...
- Page 12 TRANSPORTATION 1. Ensure the direction selector is in the cen- ter lock position. 2. Only carry by its handle. EN - 12 SENIX.COM.AU...
- Page 13 Replace with new battery pack reach full power Incorrect torque setting Adjust to a proper torque setting Drill/screwdriver bit is dull/damaged Replace with new one Unsatisfactory result Drill/screwdriver bit is not suitable for Use proper drill/screwdriver bit. intended operation 13 - EN SENIX.COM.AU...
Need help?
Do you have a question about the PDHX2-M2-EU and is the answer not in the manual?
Questions and answers