Step 3: Set The Distance From The Listening Point - Yamaha RX-V371 Owner's Manual

TRANSMIT CODE SET
SOURCE RECEIVER
SLEEP jCursor B / C
5 Use
HDMI
(subwoofer) you want to configure, and
1 2 3 4
AV
then use
1 2 3 4
AUDIO
status and size.
5 1 2
V-AUX [ A ] [ B ] DOCK
Information
TUNER
Subwoofer
FM AM
PRESET TUNING
Front
INFO MEMORY
ENHANCER SUR. DECODE
MOVIE MUSIC STEREO
STRAIGHT
Center
SCENE
BD
TV CD RADIO
DVD
SETUP OPTION
j
ENTER VOLUME Sur. LR
RETURN
DISPLAY
TOP POP-UP
MUTE
MENU MENU
REC
Crossover
1 2 3 4
5 6 7 8
9 0 10 ENT
SWFR Phase
TV
INPUT
TV VOL TV CH
MUTE
Extra Bass
j
Cursor B / C / D / E
j
ENTER
j
RETURN
to select the speaker
jCursor D / E
to select speaker
Description Setting
Sets the subwoofer status. Yes/None
Selects the size (sound Small/Large
reproduction capacity) of the
front speakers.
Selects the size of the center None/Small/
speakers. Choose "None" if Large
you do not have a center
speaker connected.
Selects the size of the surround None/Small/
speakers. Choose "None" if Large
you do not have surround
speakers connected.
Audio with a frequency below 40Hz to
this limit will be output from 200Hz
the subwoofer or the front
speakers.
Switches the phase of the NRM/REV
subwoofer.
Selects whether to play front On/Off
channel low-frequency
components through either of
the front speakers or the
subwoofer (Off), or through
both the subwoofer and front
speakers (On).
• Whether or not you set "Crossover," "SWFR Phase,"
and "Extra Bass" is optional. Check how the effects
sound and then configure them to your liking.
• Use the following as a guide when setting speaker
sizes.
Woofer diameter
• 6-1/4 in (16 cm) or larger
→ Large
• 6-1/4 in (16 cm) or smaller
→ Small
When speaker size is set to "Small," low-frequency
components of the speakers you configured are
produced from the subwoofer (or from the front
speakers if there is no subwoofer).
When you have completed the settings for one speaker,
repeat the same procedure for all speakers to complete
settings.
jRETURN
6 Press when setting is complete.
Return to the previous menu.
This completes step 2.
STEP 3: Set the distance from the
listening point
jCursor C
7 Press to display "Distance" and
press jENTER.
DIST
Unit;;;;;;feet
CONNECTIONS
Setting up speaker parameters
jCursor B / C
8 Press
that you want to configure, and press
jCursor D / E
to change the distance.
If necessary, you can change the setting units under
"Unit."
Information Description
Unit Switches between setting
units (feet / meters).
Front L Front speaker L
Front R Front speaker R
Center
Center speaker
Sur. L
Surround speaker L
Sur. R
Surround speaker R
SWFR
Subwoofer
When you have completed the settings for one speaker,
repeat the same procedure for all speakers to complete
settings.
jRETURN
Press when setting is complete.
9
Return to the previous menu.
This completes step 3.
VOL.
SW
C
R
L
SL SR
to select the speaker
Setting
feet (ft) /
meters (m)
1.0 ft to 80.0 ft
(0.30 m to 24.0 m)
1.0 ft to 80.0 ft
(0.30 m to 24.0 m)
1.0 ft to 80.0 ft
(0.30 m to 24.0 m)
1.0 ft to 80.0 ft
(0.30 m to 24.0 m)
1.0 ft to 80.0 ft
(0.30 m to 24.0 m)
1.0 ft to 80.0 ft
(0.30 m to 24.0 m)
Continues to the
next page
23
En