Advertisement
Control Lights And Diagnostic Lights
System ID button and light
Drive activity light
Network link integrity lights (front):
Network link integrity lights (rear):
Network activity lights
Diagnostic lights:
Power
Coin-cell battery
Voltage
Wattage
6
blue light — flashes (front and back of
chassis) when the button is pressed. Press
the button again to turn it off.
blue light — blinking blue light indicates
that the computer is reading data from, or
writing data to the hard drive.
blue light — A good connection exists
between the network and the computer.
off (no light) — The computer is not
detecting a physical connection to the
network.
green — A good connection at 10 Mbs
exists between the network and the
computer
orange — A good connection at 100 Mbs
exists between the network and the
computer.
amber — A good connection at 1000 Mbs
exists between the network and the
computer.
amber — flashes when there is network
activity on the connection.
off — computer is off or has completed
POST.
amber/blinking — see the service manual
for specific diagnostic codes.
3 V CR2032 lithium coin cell
100 V to 240 V, 12.00 A to 6.00 A, 50 Hz to 60
Hz
1023 W on 100 VAC to 120 VAC, 1100 W on
200 VAC to 240 VAC
Advertisement
