Related Manuals for VELIT 2000R
Summary of Contents for VELIT 2000R
- Page 2 The latest electronic version of this document is available for download at the product page. We wish you enjoy your Velit air conditioner. For any product questions or issues, you can reach out to us at support@velitcamping.com or use the online chat box at velitcamping.com.
- Page 4 SPECIFICATIONS 2000R W 31.7”x L31.7”x H 7.0” W 1 3 .8 ”x L 1 1 ” x H 4 .3 ” 66lb Page...
- Page 5 INSTALLATION Choosing Proper Location for the Air Conditioner Route the 6AWG power cable to the roof opening. Leave at least inches of slack. For · cables longer than 15ft, refer to NEC (National Electric Code) for proper sizing of wire (12V 60A).
- Page 6 3.3 Place the Unit over the Roof Opening ● Grap the bottom two sides of the unit, lift it and place it over the roof opening. ● Pull out the power cable. 3.4 Secure the Unit to the Mounting Brackets ●...
- Page 8 4. OPERATION 4.1 Modes Mode changes only the compressor speed. Fan speed can be adjusted separately. Output from low to high: Sleep : ECO : Cooling : TURBO : 4.2 Control Panel 1 - Power ON/OFF: Short press to turn on unit. Long press 2s to turn off. Short press to turn off/on display while the unit is running 2 - Mode Switch: Short press to switch between operating modes: Output from low to high output: Sleep, Eco, Cooling, Turbo...
- Page 9 4.3 Remote Control This is a general-purpose remote. Some buttons do not apply to this model. ： Turn ON/OFF ： Switch between modes ： Change fan speed ： Increase temp ： Decrease temp ： Sleep mode ： ECO mode ： Cooling mode ：...
- Page 10 4.3 Switch Display Unit °C/°F This feature is only available to units that come with display remote control. Method 1: When the unit is on, long press the mode button on the display panel for 3s Method 2: When the unit is powered off, on the remote control, short press the mode button and down arrowbutton at the same time.
- Page 12 5.2 Unit not cooling Clean the inlet filter. Turn on the unit and measure the pressure at the low-pressure port. Use this chart to find the nominal pressure value based on the ambient temperature. If the pressure is lower than the nominal value, use a recharge kit (can be purchased from Auto part stores and Home Depot) to charge the unit to the desired pressure.
Need help?
Do you have a question about the 2000R and is the answer not in the manual?
Questions and answers