Page 3
Please check that all the components in the following list are present, before starting the barbecue assembly operations Number Quantity Components Barbecue Lid Combustion Chamber Lid Handle Spring Thermostat Air Regulator Ash Tray Charcoal Grid Ash Tray Handle Upper Hinge Lower Hinge Cast Iron Cooking Grid Side Shelf Support...
Page 4
STEP 1 1. Insert the base of the long legs (15) and the base of the short legs (16) to the upper part of the legs (17) and screw in with 2 hexagonal bolts 1/4-20x1-3/4" and the 1/4-20 nuts. Repeat this step for the other legs STEP 2 2.
Page 5
STEP 3 3. Insert the 4 corners of the object shelf (19) inside the 4 holes on the assembled legs. Rotate the legs upward no to the vertical position. Important: Make sure the long and short legs are at the same height STEP 4 4.
Page 6
STEP 5 5. Insert the wheels (13) to the axle, then close with the wheel covers. Then insert the feet (18) to the end of the long legs. STEP 6 6. Place in straight pisizone, the base of the carriage thus assembled. Attach the chamber combustion (2) to the trolley using 4 1/4-20x1-3/4"...
Page 7
STEP 7 7. Assemble top hinges (9) to lid (1) using 4 hex bolts 1/4-20x3/4" nuts. Then assemble the cover (1) to the combustion chamber (2) using 2 hinge bolts and 2 fasteners. 8. Assemble the spring handle (3) using 2 1/4-20 nuts. 9.
Page 8
11. Assemble the side shelf supports (12) on the left side using 4 bolts hex 1/4-20x3/4" and the 1/4-20 nuts. 12. Assemble the side shelf slats (14) to the supports (12) using 6 bolts round 1/4-20x1" and the 1/4-20 nuts. 13.
Page 9
WARNING SAFETY which has no odor. 3.Way of lighting charcoal. NEVER LIGHT THE INSTRUCTIONS CARBON in homes,vehicles or tents. 11. Use the barbecue only in Method 1 - Charcoal and outdoor spaces; never use the liquid/gel: 1. Before using the barbecue barbecue inside confined spaces or carefully observe the a) Evenly distribute the...
Need help?
Do you have a question about the pedro 45 and is the answer not in the manual?
Questions and answers