Related Manuals for Kohler K-6332
Summary of Contents for Kohler K-6332
- Page 1 Installation Guide Pull-Out Kitchen Sink Faucets K-6331 K-6332 M product numbers are for Mexico (i.e. K-12345M) Los números de productos seguidos de M corresponden a México (Ej. K-12345M) Français, page “Français-1” Español, página “Español-1” 1071380-2-A...
-
Page 2: Tools And Materials
For new installations, assemble the faucet to the sink before installing the sink. Do not use petroleum based products on this faucet. Kohler Co. reserves the right to make revisions in the design of faucets without notice, as specified in the Price Book. 1071380-2-A... -
Page 3: Install The Faucet
Thread the ring to the threaded shank until it is about 1/4 turn from touching the sink bottom. Turn the ring so the screws are to the front and back of the faucet. Tighten the screws using a Phillips screwdriver. Kohler Co. 1071380-2-A... - Page 4 Slowly turn the faucet handle to the full cold position. Let the water run briefly to remove any debris. Slowly turn the faucet handle to the full hot position. Let the water run briefly to remove any debris. Turn the faucet handle to the OFF position. 1071380-2-A Kohler Co.
- Page 5 Extend the spray hose to ensure the spray hose does not snag or catch on items in the cabinet. Retract the spray hose and verify that the spray head is properly seated into the spout. Kohler Co. 1071380-2-A...
- Page 6 Turn the handle to the full hot position and check the water temperature. Repeat the above procedures until the desired temperature is reached. Reinstall the handle. Reinsert the setscrew into the valve stem, then tighten. Reinstall the plug button. 1071380-2-A Kohler Co.
Need help?
Do you have a question about the K-6332 and is the answer not in the manual?
Questions and answers