Page 1
Installation Guide Bath Spout K-6812, K-6854, K-6855, K-6856, K-6881, K-6907, K-6941 M product numbers are for Mexico (i.e. K-12345M) Los números de productos seguidos de M corresponden a México (Ej. K-12345M) Français, page“ Français-1” Español, página“ Español-1” 1011147-2-C...
Page 2
Before You Begin Observe all local plumbing and building codes. Shut off the main water supply. Kohler Co. reserves the right to make revisions in the design of products without notice, as specified in the Price Book. 1011147-2-C Kohler Co.
Page 3
Temporarily install 1/2″ nipples to the bath and shower elbows, extending at least 2″ (5.1 cm) beyond the finished wall. For spout-only installation, plug the unused shower outlet on the yoke or valve. Turn on the water supply and check for leaks. Complete the finished wall. Kohler Co. 1011147-2-C...
Page 4
Apply a bead of plumbers putty or other sealant around the inlet end of the spout according to the manufacturer’s instructions. Apply thread sealant to the nipple and thread the spout onto the nipple. Carefully tighten with a clean strap wrench. Remove all excess putty. 1011147-2-C Kohler Co.
Need help?
Do you have a question about the K-6855-SN and is the answer not in the manual?
Questions and answers