Related Manuals for Kohler K-4917-47
Summary of Contents for Kohler K-4917-47
- Page 1 Installation Guide Waterless Urinal K-4917 M product numbers are for Mexico (i.e. K-12345M) Los números de productos seguidos de M corresponden a México (Ej. K-12345M) Français, page “Français-1” Español, página ″Español-1” 1048744-2-D...
-
Page 2: Tools And Materials
Carefully inspect the new urinal for damage. Roughing-in remains the same when using the optional 3″ outlet spud. Fixture dimensions are nominal and conform to tolerances by ASME Standard A112.19.2. Site preparation may require additional tools and hardware. 1048744-2-D Kohler Co. -
Page 3: Prepare The Site
17″ (432 mm) from the finished floor. 1. Prepare the Site Install or relocate the waste pipe as necessary to conform to the roughing-in dimensions. Install adequate support framing for the wall hangers as needed. Kohler Co. 1048744-2-D... - Page 4 Install the permanent screws or lag bolts into the holes on the wall hangers, as shown on the installation template. Secure the urinal to the collar using the washers and bolts provided. 1048744-2-D Kohler Co.
-
Page 5: Complete The Installation
Pour 3 ounces (89 ml) of sealing liquid (provided) into the trapway. The sealing liquid will float on top of the water in the trapway. Position the strainer in the drain hole. Set the urinal ball in the urinal. Kohler Co. 1048744-2-D...
Need help?
Do you have a question about the K-4917-47 and is the answer not in the manual?
Questions and answers