INSTALLATION AND OPERATIONS GUIDE FOR GRAND CANYON GAS 6v MODULATING VALVE
GRAND CANYON GAS LOGS USES DEXEN 6003-3V GAS HEATING CONTROLS
Installation and service must be provided by a qualified installer, service agency or
THIS DEVICE SHOULD BE INSTALLED BY A QUALIFIED
SERVICE TECHNICIAN WITH DUE REGARD FOR SAFETY
AS IMPROPER INSTALLATION COULD RESULT IN A
HAZARDOUS CONDITION.
1. This valve system MUST be installed by a
certified and trained gas professional
2. Turn off gas supply before installing
valve.
3. All piping MUST meet applicable local
codes and ordinances and the national fuel
gas codes (ANSI Z223.1/NFPA NO.50)
4. ALL wiring MUST meet applicable
electrical codes and ordinances.
5. Check out the complete system after
installing the valve.
6. Prior to installation, verify conformance
with burner installation instructions.
INSTALLER: Leave this manual with the log set
CONSUMER: Retain this manual for future reference.
1
CAUTION
CAUTIONS
Grand Canyon Gas Logs---3515 E. Atlanta Ave---Phoenix, AZ 85040
gas supplier
IF YOU SMELL GAS:
1. OPEN ALL WINDOWS
2. DO NOT TOUCH ELECTRICAL SWITCHES
3. EXTINGUISH ALL OPEN FLAMES
4. IMMEDIATELY CALL YOUR GAS
SUPPLIER
Valve Systems:
MVKEIKN
MVKEIKLP
FOR YOUR SAFETY
Need help?
Do you have a question about the MVKEIKN and is the answer not in the manual?
Questions and answers