Summary of Contents for ICON Health & Fitness PRO-FORM CC500
Page 1
proformfitness.ca USER’S MANUAL Model No. PFTL39621C.0 Serial No. Write the serial number in the space above for reference. Serial Number Decal REGISTER YOUR PRODUCT To register your product and activate your warranty today, go to iconservice.ca. MEMBER CARE Call toll-free 1-888-936-4266 Mon.–Fri.
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read all important precautions and instructions in this manual and all warnings on the treadmill before using the treadmill. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
Page 4
19. Read, understand, and test the emergency 26. When folding or moving the treadmill, make stop procedure before using the treadmill sure that the storage latch is holding the (see HOW TO TURN ON THE POWER on frame securely in the storage position. Do page 15).
BEFORE YOU BEGIN Thank you for selecting the new PROFORM CC500 reading this manual, please see the front cover of this ® treadmill. The CC500 treadmill offers a selection of fea- manual. To help us assist you, note the product model tures designed to make your workouts at home more number and serial number before contacting us.
PART IDENTIFICATION CHART Use the drawings below to identify small parts used for assembly. The number in parentheses below each draw- ing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity used for assembly.
ASSEMBLY • Assembly requires two persons. • Left parts are marked “L” or “Left” and right parts are marked “R” or “Right.” • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing •...
Page 9
2. Make sure that the power cord is unplugged. Carefully raise the Right Upright (81) to the verti- cal position. Next, start a 3/8" x 2 1/4" Screw (1) and a 3/8" x 3/4" Screw (3) into the Right Upright (81) and the Base (90) as shown;...
Page 10
4. Set the console assembly (A) face down on a soft surface to avoid scratching the console assembly. Attach the Right and Left Trays (95, 94) with six #8 x 3/4" Screws (29); start all six Screws, and then tighten them. Do not overtighten the Screws.
Page 11
6. Connect the Upright Wire (78) to the con- sole wire (B). The connectors should slide together easily and snap into place with an audible click. If they do not, turn one connec- tor and try again. Insert any excess wire into the console assembly (A).
Page 12
8. Slide the Right Inner Upright Cover (84) between the Right Upright (81) and the Motor Hood (62). Next, press the Right Outer Upright Cover (85) against the Right Inner Upright Cover until they snap together. Then, tighten a #8 x 3/8" Screw (6) into the Right Outer Upright Cover (85).
HOW TO USE THE TREADMILL HOW TO CONNECT THE POWER CORD capable of carrying 15 or more amps. To avoid overloading the circuit, do not plug other electrical Use a Surge Suppressor devices, except for low-power devices such as cell phone chargers, into the surge suppressor or into Your treadmill, like other electronic equipment, can be an outlet on the same circuit.
CONSOLE DIAGRAM FEATURES OF THE CONSOLE To turn on the power, see page 15. To use the manual mode, see page 15. To use an iFIT workout, The treadmill console offers a selection of features see page 17. To connect a heart rate monitor to the console, see page 19.
HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE IMPORTANT: If the treadmill has been exposed to 1. Insert the key into the console. cold temperatures, allow it to warm to room tem- perature before you turn on the power. If you do See HOW TO TURN ON THE POWER at the left.
Page 16
3. Change the incline of the treadmill as desired. Time—The elapsed time. To change the incline of the treadmill, press the Incline increase and decrease buttons or one of the numbered incline buttons. Each time you press the Incline increase or decrease button, the incline setting will change by 0.5 percent.
Page 17
To customize the scan mode, first press the HOW TO USE AN iFIT WORKOUT Display button repeatedly until the workout information that you want to add to or remove from The console offers access to a large and varied library the scan cycle appears in the display.
Page 18
4. Select an iFIT workout. Note: The calorie goal shown in the workout description is an estimate of the number of In the iFIT app, touch the buttons at the bottom of calories that you will burn during the workout. The actual number of calories that you burn the screen to select either the main menu (Home will depend on various factors, such as your...
HOW TO CONNECT A HEART RATE MONITOR TO THE SETTINGS MODE THE CONSOLE 1. Select the settings mode. The console is compatible with all Bluetooth Smart heart rate monitors. See page 20 for information To select the settings mode, about purchasing an optional heart rate monitor. press the gear button (P).
Page 20
Display Test—This screen is intended to be used HOW TO USE THE SOUND SYSTEM by service technicians to identify whether the display is working correctly. To play music or audio books through the console sound system while you exercise, plug a 3.5 mm male Button Test—This screen is intended to be used to 3.5 mm male audio cable (not included) into the by service technicians to identify whether a certain...
IC INFORMATION This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device.
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL HOW TO MOVE THE TREADMILL Before folding the treadmill, remove the key and Before moving the treadmill, fold it as described at the unplug the power cord. CAUTION: You must be left.
MAINTENANCE AND TROUBLESHOOTING MAINTENANCE c. Check the power switch located on the treadmill frame near the power cord. If the switch protrudes Regular maintenance is important for optimal per- as shown (A), the switch has tripped. To reset the formance and to reduce wear. Inspect and properly power switch, wait for five minutes and then press tighten all parts each time the treadmill is used.
Page 24
SYMPTOM: The walking belt slows when walked on SYMPTOM: The walking belt is off-center or slips when walked on a. Use only a surge suppressor that meets all of the a. If the walking belt is off-center, first remove the specifications described on page 13.
EXERCISE GUIDELINES Aerobic Exercise—If your goal is to strengthen your WARNING: cardiovascular system, you must perform aerobic Before beginning this exercise, which is activity that requires large amounts or any exercise program, consult your physi- of oxygen for prolonged periods of time. For aerobic cian.
PART LIST Model No. PFTL39621C.0 R0721A Key No. Qty. Description Key No. Qty. Description 3/8" x 2 1/4" Screw Walking Belt M8 x 50mm Screw Platform Cushion 3/8" x 3/4" Screw Belt Guide Hood Clip Drive Roller/Pulley M4.2 x 19mm Screw Drive Belt #8 x 3/8"...
Page 27
Key No. Qty. Description Key No. Qty. Description Console Idler Roller Right Idler Roller Bracket French Warning Decal Left Idler Roller Bracket – User’s Manual Note: Specifications are subject to change without notice. For information about ordering replacement parts, see the back cover of this manual.
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...
Need help?
Do you have a question about the PRO-FORM CC500 and is the answer not in the manual?
Questions and answers