Compaq DL760 - ProLiant - 1 GB RAM Upgrade Manual

hp ProLiant DL760
generation 2 server
upgrade poster

Regulatory Compliance Notices

Regulatory Compliance Identification Numbers
For the purpose of regulatory compliance certifications and
identification, this product has been assigned a unique series
number. The series number can be found on the product
nameplate label, along with all required approval markings
and information. When requesting compliance information for
this product, always refer to this series number. The series
number should not be confused with the marketing name or
model number of the product.
Regulatory Notice Rating Label
The rating label on the device shows which class (A or B) the
equipment falls into. Class B devices have an FCC logo or
FCC ID on the label. Class A devices do not have an FCC ID
or logo on the label. After the class of the device is
determined, refer to the corresponding statement on the
Documentation CD.
Audience Assumptions
This poster provides a quick way for customers experienced in
server installation to upgrade the ProLiant 8500 or ProLiant
DL760 server to a ProLiant DL760 Generation 2 server. These
instructions are written assuming you are qualified to install
and service computer equipment and are trained to recognize
hazards in products with high energy levels, such as the
power supplies in this computer system. For detailed
instructions, refer to the HP ProLiant DL760 Generation 2
Server User Guide included on the Documentation CD.

Important Safety Information

Before installing the product, read the Important Safety
Information guide included with the server.
WARNING: This product contains energy levels that are
considered hazardous. There is a risk of personal injury
from electric shock and hazardous energy. The installation
and servicing of this product must be performed by
individuals who are knowledgeable of the procedures,
precautions, and hazards associated with equipment
containing hazardous energy circuits.
WARNING: To reduce the risk of personal injury or
damage to the equipment:
• Observe local occupational health and safety
63 - 73 kg
requirements and guidelines for manual
140 - 161 lb
material handling.
• Obtain adequate assistance to lift and stabilize
the chassis during installation or removal. The
product will be unstable when not fastened to
the rails.
• Remove all hot-plug power supplies, removable
modules, and drives to reduce the overall weight
of the product.
WARNING: To reduce the risk of personal injury from hot
surfaces, allow the internal components to cool before
touching them.