Comparison of AMT vs ASF Capabilities
Capabilities
OOB (Out Of Band) Management
Remote Control
Event Alerting
Non-Volatile Storage
Event Logging
Remote Boot
Asset Information
Remote ME FW Update
Secure Communication
Connection Protocol
Layer 4 Stack
Broad Enterprise ISV Support
Network Performance Impact
The installation of a virtualized appliance causes the NIC device to dynamically change device IDs. This
should result in "New hardware found" messages and the installation of different virtual drivers.
Intel NIC Vendor ID, Device ID, and description string:
•
Physical - 8086 / 104A "Intel 82566DM Gigabit Network Connection"
•
Virtualized - 8086 / 10B7 "Intel Pro/1000 vVE Network Connection"
This causes redirection of user networking I/O to the virtual partition, which can impact network traffic
performance. Third party appliances that inspect network packets will impact this further.
AMT
Yes - From any power state (S0,
S3, S4, S5)
Yes - SOL, IDE-R, reboot, wake,
shutdown, and more
Yes - Preset (restrictive)
Yes - Third Party Data Store (3PDS)
Yes
Yes - PXE or IDE-R
Yes - HW and SW
Yes
TLS / HTTP Digest
HTTP
(Accessible by Web browser)
TCP
(Preferred routing protocol)
Yes
ASF
Limited - System must be in S0,
needs to be remotely woken first
Limited - Remote reboot and wake
only
Yes - Policy based (flexible)
No
No
Yes - PXE
No
No
Simple Authentication
RMCP
UDP
(Often blocked by routers)
No
8