1. Manuals
  2. Brands
  3. Flightcell Manuals
  4. Controller
  5. DZMx Plus
  6. Installation manual

Flightcell DZMx Plus Installation Manual

Hide thumbs Also See for DZMx Plus:
Table of Contents

Advertisement

Quick Links

Download this manual
DZMx Plus Installation Manual
DZMx Plus Product Revision 4.0
Firmware 4.13.0
117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual
Effective Date: 17 January 2025
Flightcell Support
025

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DZMx Plus and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Flightcell DZMx Plus

Summary of Contents for Flightcell DZMx Plus

  • Page 1 DZMx Plus Installation Manual DZMx Plus Product Revision 4.0 Firmware 4.13.0 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual Effective Date: 17 January 2025 Flightcell Support...

  • Page 2: Manual Revisions And Approvals

    Flightcell International has provided this document for. Any electronic or printed copy of this document or any revision must contain the complete text of this copyright notice. Any unauthorised commercial distribution of this document or any revision hereto is strictly prohibited.

  • Page 3: Table Of Contents

    Iridium Push-To-Talk (IrPTT) ........................28 Advanced Audio Settings ........................28 Modem Configuration ........................... 28 Configuring the cellular bands used by the DZMx Plus cellular modem ..........33 Backlighting ............................34 DZMx Plus Data ............................39 DZMx Plus Wi-Fi ............................ 42 DZMx Plus Bluetooth™...
  • Page 4 Contact Details ............................81 SECTION 10: WARRANTY ......................82 SECTION 11: ABBREVIATIONS ....................83 APPENDIX 1: CONNECTOR KITS SUPPLIED WITH DZMX PLUS AND ASSOCIATED PARTS ....84 APPENDIX 2: ADVANCED ROUTING FUNCTIONS ................86 APPENDIX 3: CONFIGURATION OF IRIDIUM CERTUS SERVICE ............92 APPENDIX 4: SOFTWARE DEFINED RECEIVER (SDR) INSTALLER DZMX PLUS ........

  • Page 5: Introduction

    This manual applies to DZP_07 Flightcell DZMx Plus revision 4.0 with firmware 4.12.0. Firmware 4.12.0 can also be applied as a firmware upgrade on all Revision 2.x, and 3.x DZMx Plus, but the Software Defined Receiver functions will not be available.
  • Page 6 AIS and SDR license removal. Earlier units running v4.12.0 with SDR and AIS licenses loaded will continue to work as normal SDR Antenna Configuration 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual Effective Date: 17 January 2025 Page 6 of 130...

  • Page 7: Dzmx Plus Equipment

    Connector kits are supplied with the DZMx Plus Transceiver DZP_07-xxx-xxxx and DZMx Plus Control Head, DZP_05-002. The content of the connector kits depends on the version of the DZMx Plus. Optional extras based on the unit dash number and customer requirements may be supplied at additional cost.

  • Page 8: Dzmx Plus Specifications

    Variants and Part Numbers The DZMx Plus can be built with a range of hardware options. The DZMx Plus part number is DZP_07. The 3-7 digit dash number immediately following DZP_07- designates the variant of the DZMx Plus. The available variants may change from time to time. The options available to build up the different variants are: »...

  • Page 9: Electrical

    RF RX Sensitivity -118 dBm Max Cable Loss 3 dB Antenna impedance 50 Ω USER INTERFACE Power switch Momentary action switch PWR on/off with backlight 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual Effective Date: 17 January 2025 Page 9 of 130...

  • Page 10: Environmental/Emi Qualifications

    Environmental/EMI Qualifications The DZMx Plus is designed against RTCA DO-160G. Details of the DO-160G compliance is provided in the DZMx Plus Declaration of Design and Performance (DDP) (document 120-00003 DZP_07 DZMx Plus DDP). DO-160G test reports are available on request from tech@flightcell.com.

  • Page 11: Installation

    If the DZMx Plus Control Head is installed in the pedestal, for ease of use, it is preferable to install it as near to the front of the pedestal as possible.

  • Page 12: Dzmx Plus Wiring Guide

    20° below. Avoid mounting the unit where the display will be viewed at an oblique angle, as it may not be clearly readable. It is preferable to mount the DZMx Plus to minimise sunlight shining on the display.

  • Page 13: Connector Pinouts

    It is recommended that enough slack be left in the main cable to enable the DZMx Plus to be partially removed from the aircraft panel for service or to exchange the Iridium and/or cellular SIM card. Grounding and Shielding Terminations The DZMx Plus Transceiver chassis ground connection is on the Transceiver Unit’s primary...
  • Page 14 Transceiver Status Indicator x3 GREEN – Good Signal AMBER – Medium Signal RED – Bad Signal OFF – No Signal SIM TRAY Transceivers 1 and 2 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual Effective Date: 17 January 2025 Page 14 of 130...
  • Page 15 AUDIO TO AUX TXCVR HI Output AUDIO TO AUX TXCVR LO Output RS485 Rx- Input SPARE SHIELD Ground POWER GROUND Ground SPARE SHIELD Ground 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual Effective Date: 17 January 2025 Page 15 of 130...
  • Page 16 GENERAL PURPOSE INPUT 4 Input GENERAL PURPOSE INPUT 3 Input GENERAL PURPOSE INPUT 2 Input DC SUPPLY POSITIVE Power D62 shell CHASSIS GND Ground 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual Effective Date: 17 January 2025 Page 16 of 130...

  • Page 17: Navigating The Menus

    Navigating the Menus The keypad is used to access the menu system: » Press MENU. If the DZMx Plus is on a phone call, press and hold MENU to access the menus. » Use the UP and DOWN arrow keys to navigate between the menu options.

  • Page 18: Installing A Dzmx Plus Control Head

    Configuring the DZMx Plus for one or two Remote Heads The primary Control head is pre-configured to correctly communicate with the DZMx Plus with its Head Address set to A. Additional Remote Heads need to be activated in the DZMx Plus so they are correctly recognised.

  • Page 19: Dzmx Plus Antennas

    Press ENTER to save the setting. Configuring the Remote Heads Each Remote Head needs to be allocated a unique head ID so that the DZMx Plus can identify it. » Press and hold the BACK key on the Head for 2 seconds, then release. Scroll down to Advanced press ENTER.
  • Page 20 Blue Antenna for Software Defined Receiver An antenna is required if the Software Defined Receiver is installed in the DZMx Plus, For best results the appropriate frequency band antenna must be installed. This is due to the wide frequency range and multiple modes available of operation.

  • Page 21: Configuration

    Installer Menu needs to be activated. The Installer Menu will remain active until the DZMx Plus is next powered off. If a menu item mentioned in this manual cannot be found ensure that the Installer Menu has been activated.
  • Page 22 DZMx Connect will open in the browser. If the DZMx Plus has been allocated a fixed IP address, or the DZMx Plus is set up as a DHCP client, then it is necessary to enter this address (this could be, for example, 192.168.4.100).
  • Page 23 MODE key. » Using the DZMx Plus keypad, go to MENU > Hardware Config > Wireless and Networks > Wi-Fi Enable. Connect a PC or laptop to the DZMx Plus via an Ethernet cable.

  • Page 24: Audio Installation And Configuration

    Audio from the above services is connected into the aircraft audio system or intercom (ICS) to enable aircrew, mission crew or passengers to use these connections. The DZMx Plus can be connected to the aircraft audio system or ICS in several ways, depending on the aircraft configuration and type of operation.
  • Page 25 When installing the DZMx Plus with an ICS that uses low impedance mics, the DZMx Plus must be connected to a line level Radio/Comms port. If a line-level port is not available and the DZMx Plus is to 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual...
  • Page 26 As the Iridium satellite phone and cell phone are both full duplex, it is preferable to use the DZMx Plus on a hot mic connection, rather than PTT (keyed). The DZMx Plus will typically be installed in one of the following ways: »...

  • Page 27: Adjusting Audio Volume

    60 for details on wiring and configuring a call annunciator. Adjusting Audio Volume Audio levels can be adjusted on DZMx Connect or the DZMx Plus Control head, however as there is a short lag when using DZMx Connect, it is recommended that audio levels are adjusted using the DZMx Plus Control head.

  • Page 28: Iridium Push-To-Talk (Irptt)

    If using IrPTT, the DZMx should be connected to a spare transceiver position. The PTT keyline for that transceiver position is then wired to one of the DZMx General Purpose Inputs – see DZMx Plus Inputs on Page 58 for details of how to wire and configure the Input.

  • Page 29: Cellular Modems

    » An Iridium 9603 modem (used for Short Burst Data only). External Modems and Phones One external modem or satellite phone can be connected to the DZMx Plus via its RS232 serial port: » A Flightcell Iridium Modem »...
  • Page 30 Configuring the DZMx Plus for other external devices Other devices may be connected to the DZMx Plus RS232 serial port. The DZMx Plus needs to be configured to recognise and control the connected device In DZMx Connect, go to Settings > Hardware >...

  • Page 31: Configuring Modems

    » Tilt the card downward until it clicks into the groove in the tray. » Insert the tray into the slot on the back of the DZMx Plus and secure in place with the two cap screws. Note: Ensure that the SIM cards are in the correct slots, as they may be permanently damaged if incorrectly installed.
  • Page 32 Iridium Service Providers use different SSNs (e.g. Telstra and Pivotel in Australian; DISA for US military). If (No SMS) is displayed next to the Iridium modem's status message on the DZMx Plus display, the service centre number is incorrectly set. The service centre number can be selected: »...

  • Page 33: Configuring The Cellular Bands Used By The Dzmx Plus Cellular Modem

    Configuring the cellular bands used by the DZMx Plus cellular modem The cellular modems installed in the DZMx Plus can access 4G (LTE) and if available, 3G and 2G (GSM) services on the cell networks. For each of these services, there will usually be several cellular frequency bands.

  • Page 34: Backlighting

    NVIS Backlighting Options The DZMx Plus Control Head is available in either NVIS-B compatible or NVIS-A versions. Most DZMx Plus installations will be NVIS-B; the NVIS-A versions are only required by some military organisations (mainly in the USA).
  • Page 35 0 and 3200 for a nominal input range of 0 to 28 volts, however a smaller range may be used External Lighting Control Modes There are a range of ways an external dimmer control can operate. The DZMx Plus Control Head has several modes designed to provide for the different options. »...
  • Page 36 Exit the menu one level by pressing the BACK key. » Repeat steps 5 to 7 above for Ext Lighting Night High, setting the dimmer control to its maximum. 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual Effective Date: 17 January 2025 Page 36 of 130...
  • Page 37 A hysteresis band is used to prevent the accidental switching into day mode, or flickering between modes,the size of which can be adjusted using the Ext Lighting Hysteresis setting, see Input Filtering section below. 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual Effective Date: 17 January 2025 Page 37 of 130...
  • Page 38 'day' range. Note: The voltage values in the diagram below are examples only. The actual values when the head backlighting is calibrated may differ. 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual Effective Date: 17 January 2025 Page 38 of 130...

  • Page 39: Dzmx Plus Data

    Note: Menus for DZMx data settings have been changed in DZMx firmware 3.8.1/4.8.1. Network settings have been brought together in Settings > Network. 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual Effective Date: 17 January 2025 Page 39 of 130...

  • Page 40: Ethernet Configuration

    It is recommended to configure Ethernet settings on the DZMx Plus Control Head if the DZMx does not have Wi-Fi. The DZMx Plus can be set as a DHCP server, a DHCP client, or allocated a fixed IP address. »...
  • Page 41 Cellular data can be enabled or disable in DZMx Connect by going to Settings > Modems. If the DZMx Plus has one cell modem, this will be designated Modem 2. If dual cell modems are installed, these will be Modem 1 and Modem 2.

  • Page 42: Dzmx Plus Wi-Fi

    » Provide WPA2 encryption security to wireless devices. Starting Wi-Fi If the DZMx Plus is Wi-Fi capable and the Wi-Fi licence has been activated, the Wi-Fi service is active by default. When Wi-Fi is enabled, a wireless icon will appear at the top right of the screen on the front panel.
  • Page 43 If required, SSID Broadcast can be disabled to prevent unauthorised persons seeing the DZMx Wi-Fi. Only devices that have previously logged into the DZMx Wi-Fi and have the current SSID and passkey will connect automatically. 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual Effective Date: 17 January 2025 Page 43 of 130...

  • Page 44: Dzmx Plus Bluetooth

    DZMx Plus Bluetooth is a licensed application; purchase of a Wi-Fi or Bluetooth licence is required to activate Bluetooth on the DZMx Plus. DZMx Plus Bluetooth provides the ability to pair a mobile device, such as mobile phone or tablet, to the aircraft ICS/headset. This is like the hands-free operation in a motor vehicle.

  • Page 45: Enabling Bluetooth

    When Bluetooth is enabled, the Bluetooth icon will appear at the top right of the screen on the front panel. Bluetooth can be disabled in the DZMx Plus Control Head menu: Go to MENU > Hardware Config > Wireless and Networks > Bluetooth Enable. Pairing »...

  • Page 46: Handsfree Calling

    The DZMx Plus supports a Bluetooth Audio Streaming Protocol (A2DP). If a Bluetooth device is connected and pairing has been successful, the DZMx Plus will display a musical icon in the top left corner of its display (see ‘Pairing’ above). When the user starts audio playing on the connected mobile device it will be audible through the ICS/Headset.

  • Page 47: Dzmx Plus Messaging

    Adding a position to Quick Messages The DZMx Plus can be configured to include the aircraft position when a quick message is sent. The received message will show the position and a small preview, and the position can be opened on Google Maps.
  • Page 48 Tracking can be disabled (until re-enabled) or suspended (for the current flight only). To suspend or disable tracking, using the DZMx Plus Control Head go to MENU > Tracking > Tracking Mode or on DZMx Connect go to Settings > Tracking > General > Tracking mode and select one of the following options: »...
  • Page 49 The DZMx Plus can prioritise the available networks used for sending tracking messages. This is particularly useful to allow you to prioritise the cheapest transmission method, enabling least cost tracking while allowing the DZMx Plus to fall back to the alternate network if there is no coverage on the preferred network.
  • Page 50 Iridium SMS for tracking, until the call has ended. Configuring DZMx Plus Tracking Destinations Once the Tracking Service Provider has your account set up, the DZMx Plus can be configured to send tracking messages to your selected providers. The destination gateways for Iridium and cellular networks need to be configured for each tracking service, they will provide you with the destination addresses.
  • Page 51 Using DZMx Connect. Go to Settings > Tracking > Periodic. Select the required periodic timer settings. Using the DZMx Plus Control Head keypad. Go to MENU > Tracking > Periodic Events. Use the LEFT  key to reduce the interval and the RIGHT  key to increase the interval. The intervals are displayed in minutes.
  • Page 52 Configuring the Heading Timer Note: The DZMx Plus will not track at the HD rate when on the ground. The DZMx Plus will use the On Ground periodic timer setting (which may be disabled by setting to 0). If the Heading Timer is configured, a position report will be sent as soon as a specified change in heading occurs.
  • Page 53 Typically, this is triggered by the transmission oil pressure warning light circuit. See DZMx Plus Inputs on Page 58 for details on wiring and configuring the inputs. Configuring Manual Position Reports The MARK key on the DZMx Plus Control head keypad can be configured to send a variety of manual reports: »...
  • Page 54 Click Quick Message Groups » Tick the index numbers of the messages you want to be sent to this contact » Repeat for additional contacts. 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual Effective Date: 17 January 2025 Page 54 of 130...
  • Page 55 Flight timer information will be included in take-off and landing event reports if selected. Note: Event reports can be sent by SMS and/or email even if DZMx Plus tracking is not being used. 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual...
  • Page 56 “oldest messages first”. » Restore Unsent Msgs; unsent messages in the queue are retained in DZMx Plus memory when it is powered down and sent when the DZMx Plus is started up again. This function can be toggled on or off. Note: Some tracking providers are unable to cope with tracking messages that are out-of-order, so it may be required to use the Send Oldest First setting.

  • Page 57: Alert Mode

    Enabling A.R.M. allows for the feature to be activated when the A.R.M. key is pressed. To enable the A.R.M. function using the DZMx Plus Control Head keypad go to MENU > Tracking > ARM Enable. Not all Flightcell tracking providers support A.R.M. Before activating A.R.M., contact your tracking service provider to determine if they support this function.

  • Page 58: Dzmx Plus Inputs And Outputs

    Another seven inputs can be installed with the optional Input Expansion Card (IEC). DZMx Plus Inputs The DZMx Plus general purpose inputs (GPIs) can be used to indicate some event or state on the aircraft. A standard DZMx Plus has five inputs, with another seven inputs available on the optional DZMx Plus Input Expansion Card (IEC).
  • Page 59 These inputs can be set up on either the DZMx Plus Control Head keypad (at MENU > Hardware Config > Input Configuration) or using DZMx Connect (Settings > Inputs). In practice, it is easier to set them up using the DZMx Plus control head as the DZMx Plus reports the status of the input in real time.
  • Page 60 DZMx Plus Outputs The DZMx Plus has two outputs, which are switches that can be used to turn an electrical signal on or off. A typical use of an output is to energise a ring alert light on the aircraft panel.

  • Page 61: Gps

    It is recommended that the Flightcell USB/Ethernet module is installed to provide the necessary Ethernet connection. The DZMx Plus can be set as a DHCP server, a DHCP client, or allocated a fixed IP address. These can be selected using DZMx Connect. Go to Settings > Preferences > Local Network > Local Network Settings.
  • Page 62 DHCP Server Mode Configuration The DZMx Plus can be set as a DHCP server, a DHCP client, or allocated a fixed IP address. These can be selected using DZMx Connect. Go to Settings > Preferences > Local Network > Local Network Settings.
  • Page 63 Press END to return to the main screen. Note: To check which IP address is in use for the Ethernet connection, using the DZMX Plus Control Head keypad: Select Menu > Diagnostics Menu > About DZMx. The Ethernet IP address will be displayed.

  • Page 64: Dzmx Plus Data Logging

    DZMx Plus Email Outbox The DZMx Plus can transmit these data logs via email. To do this, the email outbox must be configured. Using DZMx Plus Connect go to Settings > Preferences > Outgoing Email Account.

  • Page 65: Dzmx Flight Data Recorder

    The inertial data is fused and logged to provide: » Airframe pitch (degrees). » Airframe roll (degrees). » Pressure (millibars). » Pressure altitude (reference to 1013.25 millibars). 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual Effective Date: 17 January 2025 Page 65 of 130...
  • Page 66 Excess turn rate » Excess pitch change. To set up transmission of flight exceedances: » Go to Settings > Tracking > Flight Monitor Settings 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual Effective Date: 17 January 2025 Page 66 of 130...

  • Page 67: Recording And Transmitting Maintenance Data

    Check Due – to record hours since the last maintenance check and alert when the next check is due. Maintenance data can be accessed on the DZMx Plus, and can be sent automatically to the tracking service, and emailed automatically to an address configured on the DZMx Plus.
  • Page 68 Check Due on the DZMx Plus Control Head Timers menu and/or DZMx Connect Flight Timers page. The DZMx Plus will add new flight hours to the 'hours since last check' timer while in flight, resulting in the displayed Check Due counter decrementing when in flight.
  • Page 69 The Check Due Hours setting must be set and the Check Due Warning Hours must be set to see a check due warning pop-up message. 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual Effective Date: 17 January 2025 Page 69 of 130...

  • Page 70: Forms

    Forms is a feature developed to aid operators to collect data and analyse flight trends. Forms can be used to enter and report operational data. Data can be entered into forms on the DZMx Plus keypad or on DZMx Connect.
  • Page 71 The tick box  to the left of the form name allows the installer to enable/disable the form. A tick indicates the form is enabled. 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual Effective Date: 17 January 2025 Page 71 of 130...
  • Page 72 Form Field name. » If a form has been triggered by an event (e.g. start-up or flight time), the DZMx Plus will beep and display the Form Field list. The name of the triggered form be highlighted and appear at the top of the list.
  • Page 73 Complete each form then select the MODE key again to exit to the main menu screen. » If the DZMx Plus is powered off before an actively prompted form has been completed the form will appear on the screen when the DZMx Plus is next powered on.
  • Page 74 All data records that have been recorded for the selected form can be deleted. Select Delete Form History > Confirm by selecting either No or Yes. 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual Effective Date: 17 January 2025 Page 74 of 130...

  • Page 75: Dzmx Plus Applications

    DZMx Plus Applications and Licences Some DZMx Plus applications require a licence to be activated. If the licence has been purchased with the DZMx Plus, then the application will be activated before delivery. If the licence is required after delivery of the DZMx Plus, the application licences can be installed using DZMx Connect.

  • Page 76: Maintenance, Diagnostics And Support

    Section 8: Maintenance, Diagnostics and Support Diagnostics The DZMx Plus provides a range of diagnostic and other information on various aspects of the system. Real-Time Diagnostics The DZMx Plus diagnostic pages may enable you to resolve any configuration or other issues.

  • Page 77: Firmware Upgrades

    PC or laptop hard drive. Ensure the aircraft is on ground power or there is enough battery power to run the DZMx Plus for at least 1 hour (DZMx Plus draws approximately 1A at 28VDC).

  • Page 78: Upgrading The Dzmx Cellular Modem Firmware

    Ethernet connection. Initial Remote Assistance Setup Remote Assistance must be set up on the DZMx Plus before it can be used. This is a one-off configuration step and will never need to be repeated.

  • Page 79: Establishing A Vpn Connection

    This feature is useful for long-term monitoring and diagnosis. Inspections/Continued Airworthiness/Maintenance Periodic maintenance of the Flightcell DZMx / DZMx Plus is not required and is “on condition” only. Instructions for Continued Airworthiness (ICA) are not required per 14 CFR Part 21 for these products.
  • Page 80 Flightcell does recommend that an annual check be carried out on the inertial measurement unit for correct post installation calibration with the aircraft on the ground and referenced to the aircraft A/H. Refer to DZMx / DZMx Plus Installation Manual, Flight Data Recorder – Setting up the Flight Data Recorder section.

  • Page 81: Obtaining Documentation And Information

    Section 9: Obtaining Documentation and Information Documentation Comprehensive documentation is available on the Flightcell website at www.flightcell.com/resources. Technical support For technical support contact Flightcell » By email, tech@flightcell.com » By phone, +64 3 545 8651 Contact Details Mailing Address Flightcell International Limited...

  • Page 82: Section 10: Warranty

    The DZMx Plus warranty covers Flightcell manufactured items only. Any ancillary items may be covered by individual manufacturer warranties. The warranty is void if any labels are removed or if it is determined that your DZMx Plus has been: »...

  • Page 83: Section 11: Abbreviations

    Iridium Short Burst Data Software Defined Receiver Subscriber Identity Module Short Message Service TTAF Total Time Airframe Hours VoIP Voice over Internet protocol Virtual Private Network 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual Effective Date: 17 January 2025 Page 83 of 130...

  • Page 84: Appendix 1: Connector Kits Supplied With Dzmx Plus And Associated Parts

    Appendix 1: Connector kits supplied with DZMx Plus and associated parts DZMx Plus Description Supplied with Component Description Qty/ Kit CNP_00049 - Flightcell Flightcell DZMx 112116 - BNC Straight Crimp Plug, RG58 DZMx Plus Connector Plus Install 122108 - TNC Straight Crimp Plug, RG58...
  • Page 85 Connector kits for associated parts installed with DZMx Plus Description Supplied with Component Description Qty/ CNP_00030 Flightcell DZMx Flightcell DZMx 5-1478762-2 Metal Backshell for DA Size Remote Head Connector Kit Remote Head connectors Straight (15 way) M24308/2-2F DA15S M24308 Crimp and...

  • Page 86: Appendix 2: Advanced Routing Functions

    Network routing can be enabled and disabled. When disabled, the DZMx Plus will use a default static cellular configuration without automatic failover. 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual...
  • Page 87 In the most common scenarios, the Satcom data connection will be used only when lower-cost cellular interfaces are unavailable. The active route is shown by an icon on the DZMx display 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual Effective Date: 17 January 2025 Page 87 of 130...
  • Page 88 This endpoint shows the current global connectivity and interface in use. The json response is shown below. "dns_ok": true, "http_ok": true, "ping_ok": false, "online": true, "timestamp": "2023-09-07T00:15:46Z", "interface": "Generic", 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual Effective Date: 17 January 2025 Page 88 of 130...
  • Page 89 "online": true, "http_ok": true, "dns_ok": true, "ping_ok": false, "latency": -1 "timestamp": 1694045994, "interface": "wwans5_raw", "online": true, "http_ok": true, "dns_ok": true, "ping_ok": true, "latency": 320 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual Effective Date: 17 January 2025 Page 89 of 130...
  • Page 90 The DZMx provides a gateway to the internet for connected devices, but not all devices are capable of internet access. In some cases “certified” devices are only capable of connecting and/or addressing requests directly to the device/router directly connected by Ethernet cable (DZMx Plus in this case).
  • Page 91 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual Effective Date: 17 January 2025 Page 91 of 130...

  • Page 92: Appendix 3: Configuration Of Iridium Certus Service

    Secondary Port Settings (Settings > Network > Ethernet Settings) Setting Suggested Value Secondary Ethernet Configuration DHCP Server Eth1 Host IP Address 192.168.10.52 Setting Suggested Value Eth1 Subnet Mask 255.255.255.0 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual Effective Date: 17 January 2025 Page 92 of 130...
  • Page 93 SIP server on the G6 system. To ensure voice calling is possible, the SIP settings must be correct in accordance with the G6 documentation. 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual Effective Date: 17 January 2025...
  • Page 94 Call management can be accessed through the dialer page of DZMx Connect. The Certus terminal will appear as a separate dialer interface at the bottom of the page. 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual Effective Date: 17 January 2025...

  • Page 95: Appendix 4: Software Defined Receiver (Sdr) Installer

    Isolating SDR during HF transmissions SDR License and Application Activation To use SDR facilities the DZMx Plus must include the radio hardware module and have the appropriate SDR and marine-AIS license. Once licensed the SDR menu screen can be accessed through the DZMx front panel by a “Short Press”...
  • Page 96 This document will cover the use of both interfaces. DZMx Plus Control Panel Interface The DZMx Plus control panel interface is available by pressing the Mode Key. (Short Press) The DZMx Plus SDR display looks like the image below when inactive.
  • Page 97 Press the Band function key (item9) Select Radio Band and press Enter Scroll to desired band from list using the Up/Down arrows and Press Enter 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual Effective Date: 17 January 2025 Page 97 of 130...
  • Page 98 It will only update the user preset if that frequency is not already available in a stored preset Preset Activation Press the Chan function key (item Select the desired preset, press Enter 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual Effective Date: 17 January 2025 Page 98 of 130...
  • Page 99 Flightcell SDR Web Interface The Flightcell SDR web interface is available through the wireless or wired network interfaces at the following locations: » http://192.168.4.1/radio (ethernet when configured as DHCP server) » http://<dzmx-ip-address>/radio (ethernet when configured as DHCP client or DHC static) »...
  • Page 100 For items 2 -5 a dialog will be presented to allow a new value to be entered: Station Name Frequency adjustment in MHz Reception mode selection 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual Effective Date: 17 January 2025 Page 100 of 130...
  • Page 101 To delete a preset, the user can place/hover the mouse over the preset name in the list. A delete button will appear that allows the user to permanently delete the stored preset. 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual Effective Date: 17 January 2025...
  • Page 102 Clicking the export button (item 12) will download a file to the user’s device. Clicking the import button (item 13) will open a dialog to select an appropriate file for import. 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual Effective Date: 17 January 2025...
  • Page 103 The first three are audio modes and when activated the audio will be available to the user through the DZMx Plus BTL and BTR audio channels. The ADSB-IN 1090MHz, UAT 978MHz and AIS 162.0MHz modes are fixed frequency digital channels.
  • Page 104 Operator configurable start up modes The operator can set the Flightcell SDR to start up in a mode of their choice. This reduces the need to switch on the SDR by starting in a selected mode on initial power up or not. The SDR start up modes are as follows.
  • Page 105 The operator can change the selection during operation to any other radio mode » Should the SDR be switched off during flight while the DZMx Plus is still powered, it will restore to receiver Mode on start-up when switched on again.
  • Page 106 Configuration GDL-90 License and Application Activation To use the GDL-90 streaming capability, the DZMx Plus must be connected via Wi-Fi to the receiving device and have the valid SDR licenses. (Firmware v4.13.0 and higher, SDR license is not required) The ADS-B mode of the frequency monitor should be selected.
  • Page 107 Traffic Report – on reception of traffic data Electronic Flight Bag Configuration The device to be used should be connected to the DZMx Plus Wi-Fi. To receive ADS-B data the external application should be set to receive on the same port as the DZMx Broadcasts UDP.
  • Page 108 The SDR AIS receive function has an associated NMEA data stream transmission capability. When enabled the DZMx Plus will stream NMEA AIS messages over a broadcast UDP link on an assigned port. This can be used by external Electronic Flight Bag applications to provide a situational awareness view on a connected tablet.
  • Page 109 The slider can be used to adapt the scale Note: The DZMX stores a list of vessel names, MMSI and type internally to make recall easier 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual Effective Date: 17 January 2025 Page 109 of 130...
  • Page 110 Configuration AIS License and Application Activation To use the NMEA streaming capability, the DZMx Plus must be connected via Wi-Fi to the receiving device and have a valid SDR and marine-AIS license. (Firmware v4.13.0 and higher, SDR license is not required) The AIS mode of the frequency monitor should be selected.
  • Page 111 External Application Configuration The device to be used should be connected to the DZMx Plus Wi-Fi. To receive AIS data the external application should be set to receive on the same port as the DZMx Broadcasts UDP. The configuration will be according to the provider instructions. Once setup, AIS traffic should then be available in the application.

  • Page 112: Appendix 5 : Dzmx Arinc 429 Installation

    Once logged into DZMx Connect as an installer, go to Settings > Preferences > ARINC 429 Set ARINC 429 settings as below and select Done 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual Effective Date: 17 January 2025 Page 112 of 130...
  • Page 113 Using DZMx firmware v4.12 or later, ARINC 429 Data is available for selection together with other “logging email reporting” settings as required. 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual Effective Date: 17 January 2025 Page 113 of 130...
  • Page 114 The ARINC 429 Status shows the current status of the ARINC 429 settings. ARINC 429 Label Filter The ARINC 429 Label Filter allows the user to click on a label to activate/de-activate a label filter. 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual Effective Date: 17 January 2025 Page 114 of 130...
  • Page 115 This section also allows the user to download the current log file. Select the Download icon in the top right corner to do this. 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual Effective Date: 17 January 2025 Page 115 of 130...

  • Page 116: Appendix 6: Aerial Firefighting Application Manual

    Instructions for Aircraft with a Tank or Bucket Advanced settings Fire App Testing Guide Fill Pump configured Fill Level / Bucket Load Cell configured Erickson AWTC configured Kawak AWTC configured 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual Effective Date: 17 January 2025 Page 116 of 130...

  • Page 117: Introduction

    Introduction The Flightcell DZMx can be used to provide automated reporting of aerial firefighting operations, to meet the requirements of fire management agencies such as the National Aerial Firefighting Centre (NAFC) in Australia and the US Forest Service (USFC). It collects data from the aircraft and sends real- time firefighting events and GPS position information to tracking providers and fire authorities.
  • Page 118 Two separate water containers can be configured, a tank and a bucket. The settings for the tank are as follows: » Fill Pump: Tank pump status (on or off). » Fill Level: Volume of water in the tank (variable voltage). 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual Effective Date: 17 January 2025 Page 118 of 130...

  • Page 119: Firefighting Settings

    Hover: Enables detecting if an aircraft is hovering or not. Required for Fire App configurations with a helicopter and no AWTC. This is not a Fire App setting, it is under 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual Effective Date: 17 January 2025...
  • Page 120 » Fire Tank Data Logging: Advanced setting. Logs fire app data until the DZMx is powered off and on again. For diagnostic support. 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual Effective Date: 17 January 2025 Page 120 of 130...

  • Page 121: Fire App Logic

    Fire App Logic This section describes when tracking messages are sent from the Fire App. It leaves out many details and edge cases. If you want more detail on how the tracking system works, contact Flightcell. Filling Logic Table Water...

  • Page 122: Fire App Installation Guide

    Kawak AWTC » AFDAU-T1 » Tank or bucket with fill/drop input lines and switch to indicate whether a tank or bucket is connected 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual Effective Date: 17 January 2025 Page 122 of 130...

  • Page 123: Fire App General Installation Instructions

    Connect the Bucket Load Cell input to one of the DZMx input lines, and configure the input (Hardware Config -> Input Configuration -> Bucket Load Cell -> Input Designation). 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual Effective Date: 17 January 2025...

  • Page 124: Instructions For Aircraft With A Tank

    Tanks can be set up to work with either a Fill Pump input or a Fill Level input. Only one needs to be set up. If you have the choice, Flightcell recommends using a Fill Level input, because 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual...

  • Page 125: Instructions For Aircraft With An Erickson Awtc

    Set the Debug Port Configuration to “Erickson AWTC” (Hardware Config -> Debug Port Config > Erickson AWTC). » Connect the Erickson AWTC to the DZMx RS-232 Debug Port. 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual Effective Date: 17 January 2025 Page 125 of 130...

  • Page 126: Instructions For Aircraft With A Kawak Awtc

    There are three options for telling the DZMx when the additive has been added and quantity. » No Additive Pump input - The additive will be always added. The concentration of the additive will not be stored. 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual Effective Date: 17 January 2025 Page 126 of 130...

  • Page 127: Instructions For Aircraft With A Tank Or Bucket

    Erickson AWTC configured » Kawak AWTC configured Before starting any of these tests: » Restart the DZMx to ensure any settings changes have been applied. 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual Effective Date: 17 January 2025 Page 127 of 130...

  • Page 128: Fill Pump Configured

    Check tank volume has increased on the diagnostics screen and a fill message has been sent. » Activate drop signal, drop some water and then deactivate drop signal. 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual Effective Date: 17 January 2025 Page 128 of 130...
  • Page 129 » Check tank volume has dropped on the diagnostics screen and drop start/drop end messages have been sent. 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual Effective Date: 17 January 2025 Page 129 of 130...

  • Page 130: Technical Support

    Technical support 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual Effective Date: 17 January 2025 117-00010 Rev 1.8 Flightcell DZMx Plus Installation Manual Effective Date: 17 January 2025 Page 130 of 130...

Table of Contents