Post Upgrade Tasks; Updating Nss Volumes - Compaq CL380 - ProLiant - 256 MB RAM Supported Configurations

Select Next at the license screen. If this is not the first NetWare 6.5 server in the tree, the existing
25.
license(s) displays. You have the option to install additional licenses or to accept the existing
license and continue.
The NMAS installation screen appears. Select the desired login methods that you want to use for
26.
installing into eDirectory. When you select a login method, a description of the component
appears in the Description box. The NDS login method is installed by default and is adequate for
most installations.
Select Next to continue.
27.
NOTE
The NMAS client software must be installed on each client
workstation where you want to use the NMAS login methods.
The NMAS client software is included on the Novell Clients
Software CD (July 2003).
At this time, eDirectory is upgraded with Volume information, and the selected NMAS login
28.
methods are installed. After these steps complete, the final file copy automatically begins.
When prompted, remove the NetWare 6.5 Product CD and license diskette (if present) and select
29.
OK to reboot the server. When the server successfully reboots, NetWare 6.5 is functional and
ready for user login.

Post upgrade tasks

Updating NSS Volumes

If you upgraded from a NetWare 5.1 server with NSS volumes, you must complete the following
procedure to update NSS volumes.
When prompted at the end of the upgrade, reboot the computer.
1.
Make sure that all processes related to the NetWare 6.5 upgrade have completed.
2.
At the server console, enter the following command:
3.
NSS /ZLSSVOLUMEUPGRADE=ALL
The NSS volumes can now be mounted on the NetWare 6.5 server.
17