Installing Pci And Pci Express Cards - Dell XPS 600 Owner's Manual

NOTICE:
Do not route card cables over or behind the cards. Cables routed over the cards can prevent
the computer cover from closing properly or cause damage to the equipment.
6 Press the retention arm into place, securing the card(s) in the computer.
alignment guide
filler bracket
NOTICE:
To connect a network cable, first plug the cable into the network port or device and then plug
the cable into the computer.
7 Replace the
computer
then turn them on.
8 If you removed a sound card or a network adapter, see "Network Adapter and Sound Card
Settings" on page 94.
9 Uninstall the driver for the card that you removed.

Installing PCI and PCI Express Cards

NOTICE:
If you have or are upgrading to the optional dual-graphics configuration, see "Installing PCI
Express Graphics Cards in a Dual Configuration" on page 86 to install a graphics card.
1 Follow the procedures in "Before You Begin" on page 69.
2 Press the lever on the card retention arm and raise the retention arm.
retention arm
alignment bar
cover, reconnect the computer and devices to electrical outlets, and
Removing and Installing Parts
91